Bacterial infections account for countless deaths globally. Antibiotics are the primary countermeasure; however, the alarming spread of antibiotic‐resistant strains necessitates alternative solutions. Silver and silver compounds have emerged as promising antibacterial agents. However, issues related to cytotoxicity and genotoxicity of silver remain concern. To overcome these challenges, this proposes an easy‐to‐control and straightforward method to synthesize novel Silver─gallium (Ag─Ga) nano‐amalgamated particles. Gallium liquid metal (GaLM) is used to facilitate the galvanic deposition of silver nanocrystals (Ag) on oxide layer. The GaLM not only serves as a carrier for silver through the galvanic replacement process, but also provides a controlled‐release mechanism for silver, in this way improving biocompatibility, reducing inflammation, and stimulating bone growth. Notably, Ag─Ga suspensions can be conveniently deposited by spray‐coating on a range of devices and material surfaces, effectively eliminating pathogenic bacteria with efficacy comparable to that of silver ions. In vivo studies in rat models affirm the antibacterial capabilities, especially against methicillin‐resistant Staphylococcus aureus and Escherichia coli, when placed on implants such as titanium rods and magnesium discs. Furthermore, Ag─Ga promotes bone matrix formation and collagen growth without eliciting an inflammatory response, indicating a major promise for coatings on a wide variety of biomedical devices and materials.

Surgical site infections (SSI) are major post‐operative complications following surgery. Reducing SSI is a global urgency as they account for huge pecuniary, physiological, and emotional burdens for patients. Antibiotic resistance is the main challenge for surgeons dealing with SSIs. Aggregation‐induced emission photosensitisers (AIE PS) with their distinct optical characteristics, biocompatibility, low toxicity, and target specificity, hold the potential for the treatment of SSI. Herein, a synergetic strategy combining plasma polymerization and AIE PS is adopted to develop coatings that can eradicate SSI‐causing bacteria. These coatings can preferentially kill Gram‐negative and Gram‐positive bacteria over mammalian cells after triggered by light irradiation. The cell viability and immunostaining studies confirmed their biocompatibility on mammalian cells. The antibacterial mechanistic studies explored their ability to generate reactive oxygen species (ROS), which is crucial for overcoming antibiotic resistance. Thus, this study opens an avenue toward antibacterial coatings to decrease the prevalence of SSI.

With the rising demand for medical implants and the dominance of implant-associated failures including infections, extensive research has been prompted into the development of novel biomaterials that can offer desirable characteristics. This study develops and evaluates new titanium-based alloys containing gallium additions with the aim of offering beneficial antibacterial properties while having a reduced stiffness level to minimise the effect of stress shielding when in contact with bone. The focus is on the microstructure, mechanical properties, antimicrobial activity, and cytocompatibility to inform the suitability of the designed alloys as biometals. Novel Ti-33Nb-xGa alloys (x = 3, 5 wt%) were produced via casting followed by homogenisation treatment, where all results were compared to the currently employed alloy Ti-6Al-4V. Optical microscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) results depicted a single beta (β) phase microstructure in both Ga-containing alloys, where Ti-33Nb-5Ga was also dominated by dendritic alpha (α) phase grains in a β-phase matrix. EDS analysis indicated that the α-phase dendrites in Ti-33Nb-5Ga were enriched with titanium, while the β-phase was richer in niobium and gallium elements. Mechanical properties were measured using nanoindentation and microhardness methods, where the Young’s modulus for Ti-33Nb-3Ga and Ti-33Nb-5Ga was found to be 75.4 ± 2.4 and 67.2 ± 1.6 GPa, respectively, a significant reduction of 37% and 44% with respect to Ti-6Al-4V. This reduction helps address the disproportionate Young’s modulus between titanium implant components and cortical bone. Importantly, both alloys successfully achieved superior antimicrobial properties against Gram-negative P. aeruginosa and Gram-positive S. aureus bacteria. Antibacterial efficacy was noted at up to 90 ± 5% for the 3 wt% alloy and 95 ± 3% for the 5 wt% alloy. These findings signify a substantial enhancement of the antimicrobial performance when compared to Ti-6Al-4V which exhibited very small rates (up to 6.3 ± 1.5%). No cytotoxicity was observed in hGF cell lines over 24 h. Cell morphology and cytoskeleton distribution appeared to depict typical morphology with a prominent nucleus, elongated fibroblastic spindle-shaped morphology, and F-actin filamentous stress fibres in a well-defined structure of parallel bundles along the cellular axis. The developed alloys in this work have shown very promising results and are suggested to be further examined towards the use of orthopaedic implant components.

Cartilage regeneration presents unique challenges due to its avascular structure, sparse cell population, and limited regenerative capacity. Recent years have seen significant advancements in the field, which warrant an integrated review that connects chondrogenesis and its practical application. This review aims to deliver comprehensive and analytical guidelines for understanding the complex process of chondrogenesis, emphasizing its critical role in cartilage regeneration. It reviews key inducers such as growth factors, mechanical stimuli, hypoxia, and electric fields, as well as their synergistic integration with biomaterials to facilitate effective strategies for repairing and regenerating damaged cartilage tissue. In addition to exploring these advancements, the paper also provides a critical evaluation of current methods used to assess chondrogenesis in in vitro and in vivo models, identifying gaps and possibilities for improvement. A particular focus is placed on addressing the translational challenges that hinder the clinical implementation of cutting‐edge research findings, offering actionable strategies to bridge the gap between laboratory discoveries and patient outcomes. By examining emerging trends and consolidating recent innovations, this review aims to offer a holistic perspective on cartilage repair. It serves as a guide for researchers and clinicians, advocating for collaborative, interdisciplinary approaches to advance the field and deliver improved therapeutic solutions for cartilage‐related conditions.