Zhiyuan Song

Dr. Zhiyuan Song


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
YZYihong Zhang
Yihong Zhang
YWYong Wu
Yong Wu
PZPuyu Zhou
Puyu Zhou
ZSZhiyuan Song
Zhiyuan Song
YJYayun Jia
Yayun Jia
杨孙杨 孙
杨 孙
Aluminum sulfate was employed as the main accelerator in order to explore new non-chloride and alkali-free cement accelerators. Acrylic acid, aluminum fluoride, or alkanolamine were used as regulators to further accelerate cement setting. The setting time, compressive, and flexural strengths in cement early strength progress were detected, and both the cement (raw material) and hydrated mortar were fully characterized. The cement setting experiments revealed that only loading acrylic acid as the regulator would decrease the setting time of cement and increase the compressive and flexural strengths of mortar, but further introduction of aluminum fluoride or alkanolamine improved this process drastically. In the meantime, structural characterizations indicated that the raw material (cement) used in this work was composed of C3S (alite), while hydrated mortar consisted of quartz and C3A (tricalcium aluminate). During this transformation, the coordination polyhedron of Al3+ was changed from a tetrahedron to octahedron. This work puts forward a significant strategy for promoting the activity of aluminum sulfate in cement setting and would contribute to the future design of new non-chloride and alkali-free cement accelerators.

25 September 2024 in Molecules
Verified
Journal Article
Open access
PDF file
ZSZhiyuan Song
Zhiyuan Song
SCSidra Chaudhary
Sidra Chaudhary
ZBZainab Bibi
Zainab Bibi
YWYong Wu
Yong Wu
QJQin-Xiang JIA
Qin-Xiang JIA
杨孙杨 孙
杨 孙
Two water-soluble block copolymers composed of acrylic acid (AA), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and optionally maleic anhydride (MAH) were synthesized through ammonium persulfate-catalyzed free radical polymerization in water. The introduction of aluminum sulfate (AS) into the resulting mixtures significantly reduced the setting times of the paste and enhanced the mechanical strength of the mortar compared to both the additive-free control and experiments facilitated solely by pure AS. This improvement was primarily attributed to the inhibition of rapid Al3+ hydrolysis, which was achieved through coordination of the synthesized block copolymers, along with the formation of newly identified hydrolytic intermediates. Notably, the ternary copolymer (AA–AMPS–MAH) exhibited superior performance compared to that of the binary copolymer (AA–AMPS). In the early stages of cement setting, clusters of ettringite (AFt) were found to be immobilized over newly detected linkage phases, including unusual calcium silicate hydrate and epistilbite. In contrast to the well-documented role of polymers in retarding cement hydration, this study presents a novel approach by providing both accelerating and hardening agents for cement setting, which has significant implications for the future design of cement additives.

13 February 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
ZSZhiyuan Song
Zhiyuan Song
SCSidra Chaudhary
Sidra Chaudhary
ZBZainab Bibi
Zainab Bibi
YWYong Wu
Yong Wu
QJQin-Xiang JIA
Qin-Xiang JIA
杨孙杨 孙
杨 孙
Two hydrophilic copolymers containing functional groups such as carboxyl, amido, and sulfonic acid are synthesized using ammonium persulfate-catalyzed free radical polymerization in water. Aluminum sulfate is then introduced, resulting in two polymer complexes that exhibit reduced cement setting times (initial, 1.16–2.44 min; final, 2.02–3.14 min) and improved compressive (24 h, 5.81–7.25 MPa) and flexural (24 h, 2.80–2.99 MPa) strengths compared to pure aluminum sulfate-facilitated cementing (initial, 19.11 min; final, 37.05 min; compressive, 24 h, 5.51 MPa; flexural, 24 h, 2.56 MPa). Following this, ball-milled illite powder is added, and the resulting admixtures further display slightly prolonged setting times (initial, 2.35–2.99 vs. 1.16–2.44 min; final, 3.98–4.35 vs. 2.02–3.14 min), along with comparable compressive strengths (5.85–7.11 vs. 5.81–7.25 MPa) and enhanced flexural strengths (3.92–5.83 vs. 2.80–2.99 MPa). Notably, a unique adhesive pozzolanic clinker, Ca54MgAl2Si16O90 (54CaO·MgO·Al2O3·16SiO2), emerges in the presence of illite-based admixtures, contributing to the mechanical strength development of the hydrated mortars. Although illite itself is hydrophobic, the coating of ball-milled illite powder with aluminum sulfate and copolymers facilitates its dispersion into the gaps and pores of the cement matrix during setting, thereby increasing the flexural strength. This work presents an interesting approach to utilizing illite materials in cement applications, which is significant for reducing CO2 emissions during cement production and use.

27 September 2024 in Materials
Verified
Journal Article
Open access
PDF file
ZSZhiyuan Song
Zhiyuan Song
ZBZainab Bibi
Zainab Bibi
SCSidra Chaudhary
Sidra Chaudhary
QJQin-Xiang JIA
Qin-Xiang JIA
XLXiaoyong Li
Xiaoyong Li
杨孙杨 孙
杨 孙
A water-soluble ternary copolymer bearing carboxyl, sulfonic, and amide functional groups was synthesized using ammonium persulfate-catalyzed free radical polymerization in water, resulting in high monomer conversion. This copolymer was then complexed with aluminum sulfate, forming an admixture containing Al(SO4)(OH)·5H2O, which was subsequently combined with silica gel. Characterization revealed that the synthesized copolymer formed a large, thin membrane that covered both the aluminum compounds and the silica gel blocks. The introduction of this complex admixture, combining the copolymer and aluminum sulfate, not only reduced the setting times of the cement paste but also enhanced the mechanical strengths of the mortar compared to using aluminum sulfate alone. The complex admixture led to the formation of katoite, metajennite, and C3A (tricalcium aluminate) in the mortar, demonstrating significant linking effects, whereas pure aluminum sulfate could not completely transform C3S within 24 h. Further addition of silica gel to the complex admixture further shortened the setting times of the paste, slightly reduced compressive strength, but improved flexural strength compared to the initial complex admixture. The silicon components appeared to fill the micropores and mesopores of the mortar, accelerating cement setting and enhancing flexural strength, while slightly decreasing compressive strength. This study contributed to the development of new cementing accelerators with improved hardening properties.

7 December 2025 in Buildings
Verified
Journal Article
Open access
PDF file
ZSZhiyuan Song
Zhiyuan Song
SCSidra Chaudhary
Sidra Chaudhary
DYDing Yan
Ding Yan
YJYan yu Jiao
Yan yu Jiao
QJQin-Xiang JIA
Qin-Xiang JIA
杨孙杨 孙
杨 孙
This study presents a new ternary copolymer synthesized via aqueous free-radical polymerization from sodium humate, sodium 2-methylprop-2-ene-1-sulfonate (SMAS), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS). The resulting highly water-soluble, three-dimensional porous copolymer is complexed with aluminum sulfate to form a composite admixture containing AlO(OH), which acts as a highly effective accelerator for cement hydration. This system significantly shortens the initial and final setting times to averages of 2.62 min and 4.53 min, respectively, and enhances early-age mechanical strength (1.7 MPa compressive, 1.4 MPa flexural at 6 h). These improvements are correlated with the formation of key crystalline phases, including Al2Si2O5(OH)4 and Ca3Al2O6·xH2O gel. Incorporation of 50-mesh carbon fibers further reduces setting times (2.21 min initial, 3.93 min final) and increases 24 h strength (5.2 MPa compressive, 2.7 MPa flexural), despite a slight reduction in early strength (at 6 h). In contrast, 200-mesh carbon fibers extend the initial setting time and diminish early strength, associated with the formation of less effective gel phases such as Ca3Al2O6·xH2O, (CaO)x(Al2O3)11, and Ca4Al2O7·xH2O. Among these, the Al2Si2O5(OH)4 phase demonstrates superior performance, while finer carbon fibers show limited effectiveness in bridging hydration products. Conventionally employed as retarders or reinforcing agents, humate-based polymers and carbon fibers are shown here to function as dual-functional admixtures—serving as efficient setting accelerators while enhancing mechanical properties through tailored material design. This strategy offers a promising pathway for developing advanced multifunctional cement admixtures.