As a typical metal-organic framework (MOF), Mg-MOF74 can release biocompatible Mg 2+ when the framework is degraded, and it has the potential to be used as filler in the field of bone tissue engineering. However, Mg-MOF74 has poor stability in aqueous environment and limited antibacterial ability, which limit its further development and applications. In this work, MgCu-MOF74 particles with different Cu content were synthesized through a facile one-step hydrothermal method. The physicochemical properties and water stability of the synthesized powders were characterized. The osteogenic potential of the MgCu-MOF74 particles on human osteogenic sarcoma cells (SaOS-2) was evaluated. The hybrid MgCu-MOF74 exhibited favorable water stability. These results indicated that MgCu-MOF74 enhanced cellular viability, alkaline phosphatase levels, collagen (COL) synthesis and osteogenesis-related gene expression. Moreover, the samples doped with Cu 2+ were more sensitive to the acidic microenvironment produced by bacteria, and exhibited stronger antibacterial ability than Mg-MOF74. In conclusion, MgCu-MOF-74 with good water stability, osteogenic ability and antibacterial ability, which could be attributed to the doping of Cu 2+ . Hence, MgCu-MOF74 shows great potential as a novel medical bio-functional fillers for the treatment of bone defects.
In this work, Ti-Mg metal-metal composites (MMCs) were successfully fabricated by spark plasma sintering (SPS). In vitro, the proliferation and differentiation of SaOS-2 cells in response to Ti-Mg metal-metal composites (MMCs) were investigated. In vivo, a rat model with femur condyle defect was employed, and Ti-Mg MMCs implants were embedded into the femur condyles. Results showed that Ti-Mg MMCs exhibited enhanced cytocompatibility to SaOS-2 cells than pure Ti. The micro-computed tomography (Micro-CT) results showed that the volume of bone trabecula was significantly more abundant around Ti-Mg implants than around Ti implants, indicating that more active new-bone formed around Ti-Mg MMCs implants. Hematoxylin-eosin (H&E) staining analysis revealed significantly greater osteointegration around Ti-Mg implants than that around Ti implants.
6 August 2022 in Colloids and Surfaces B: Biointerfaces
Ti-23Nb (at.%) coatings on an NiTi alloy with metallurgical bonding were prepared by laser cladding (LC) technology using Ti-Nb mixture powders. The effects of laser processing parameters on the microstructure and mechanical properties of the coatings were systematically investigated and the corrosion resistance of the coatings was assessed. The coatings were composed of TiNb, (Ti, Nb)2Ni, and β-Nb phases. The coatings increased the hardness of the NiTi alloy by a combined strengthening effect of the eutectics and fine microstructure. The corrosion resistance of the coated part was improved. The coatings with great corrosion resistance could keep the coated parts inert in an aggressive environment, and effectively restrain the release of toxic Ni ions, which means that the Ti-Nb alloy coatings are likely to be used as a biomaterial for medical applications.