In this paper, FH460 special steel with rare earth element cerium (Ce) was selected, and the control group without Ce was set up. By changing the content of Ce, the microstructure, phase transition point, and mechanical properties of the test steel were observed to study the effect of trace rare earth element Ce on the microstructure and mechanical properties of high-strength marine engineering steel. The morphology and energy spectrum of inclusions in three kinds of test steels were observed by SEM, and the morphological changes in inclusions in FH460 high-strength marine engineering steel after adding Ce were investigated. The fracture morphology and energy spectrum analysis were carried out by combining the tensile test at room temperature and the gradient low temperature impact toughness test, and the effect of trace Ce on the mechanical properties of the test steel was comprehensively analyzed. The results show that the addition of Ce changes the phase transformation temperature of Ac1 and Ac3, and refines the original microstructure of the test steel. SEM observation showed that the addition of Ce changed the long strip MnS and polygonal irregular Al2O3 inclusions into ellipsoids, which reduced the size of inclusions. The gradient low temperature impact test shows that with the decrease in temperature, the fracture dimple depth of the three test sheets of steel decreases, and the Ce-containing test steel forms a deep dimple centered on rare earth inclusions, which hinders the crack propagation and significantly improves the low temperature impact toughness of the test steel.
In this study, Q370qENH high-strength weathering bridge steel was used as the base material. The corrosion experiment in a marine atmosphere was simulated by the salt spray test, and the outdoor atmospheric exposure corrosion experiment and electrochemical method test were carried out. The corrosion behavior of Q370qENH high-strength weathering bridge steel in a marine atmosphere was studied using electron probe microanalysis (EPMA), field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and other surface testing techniques. The results show that the corrosion rate of the steel gradually decreases with the increase in the content of trace rare earth elements. Ce played a role in the modification of inclusions so that MnS was modified into rare earth composite inclusions, which slowed down the occurrence of corrosion. The enrichment of Cu alloy elements in the inner rust layer of the rare earth experimental steel improves the compactness of the rust layer, and the thickness of the inner rust layer is increased by 42%, which enhances the stability of the rust layer. With the increase in cerium, the protection coefficient α/γ* of the rust layer of experimental steel increases, indicating that the corrosion resistance of the material is improved. In addition, the electrochemical results show that the addition of rare earth elements in Q370qENH steel will lead to a positive shift in the electrochemical self-corrosion potential, a larger impedance radius of the steel rust layer, and a stronger protective effect. Due to the addition of trace cerium, the seawater corrosion resistance of the test steel is improved.
This study investigated the corrosion behavior and mechanism of offshore platform steel in a simulated marine atmospheric environment using electrochemical analysis, phase analysis, and rust layer characterization. The findings demonstrate that the addition of trace amounts of the rare earth element Ce significantly enhances the steel’s corrosion resistance in the marine environment and effectively reduces the corrosion rate. The addition of Ce promotes the enrichment of Cr in the inner rust layer and forms a dense protective rust layer, thereby preventing the rust layer from falling off, as well as hindering the penetration of oxygen ions. Phase analysis and electrochemical studies further confirmed that the addition of rare earth Ce optimized the structure of the rust layer, improved the matrix protection effect, and enhanced the corrosion resistance of the steel. The crystal structure of the rust layer and the stability between the matrix were simulated by first principles. The results show that the addition of rare earth enhances the bonding force and compactness of the steel matrix and the rust layer, thereby improving corrosion resistance.
27 March 2026 in Metallurgical Research & Technology
This study investigates the in-situ evolution of inclusions in rare-earth cerium (Ce)-treated highstrength offshore platform steel using high-temperature confocal scanning laser microscopy (CSLM). Integrated characterization via scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), thermodynamic modeling, and first-principles calculations elucidates the underlying mechanism through which inclusion engineering enhances mechanical performance. Ce addition effectively converts irregular MnS and MnS-Al 2 O 3 inclusions into spherical/ellipsoidal Ce–O–S composite particles. In situ observations indicate that Ce expands the austenite phase field and mitigates grain-boundary segregation. Thermodynamic analyses demonstrate improved stability of Ce-containing inclusions. First-principles calculations further reveal a significant reduction in the elastic modulus and hardness mismatch between these inclusions and the steel matrix, facilitating compatible plastic deformation and thereby elevating the low-temperature impact toughness. This conclusion is supported by complementary low-temperature impact tests and transmission electron microscopy examination of inclusions in fracture surfaces. Collectively, this work establishes a coherent mechanistic framework for Ce-driven performance enhancement in advanced offshore steels.