In power electronics, compound semiconductors with large bandgaps, like silicon carbide (SiC), are increasingly being used as material instead of silicon. They have a lot of advantages over silicon but are also intolerant of nanoscale material defects, so that a defect inspection with high accuracy is needed. The different defect types on SiC samples are measured with various measurement methods, including optical and tactile methods. The defect types investigated include carrots, particles, polytype inclusions and threading dislocations, and they are analysed with imaging ellipsometry, coherent Fourier scatterometry (CFS), white light interference microscopy (WLIM) and atomic force microscopy (AFM). These different measurement methods are used to investigate which method is most sensitive for which type of defect to be able to use the measurement methods more effectively. It is important to be able to identify the defects to classify them as critical or non-critical for the functionality of the end product. Once these investigations have been completed, the measurement systems can be optimally distributed to the relevant defects in further work to realize a hybrid analysis of the defects. In addition to the identification and classification of defects, such a future hybrid analysis could also include characterizations, e.g. further evaluation of ellipsometric data by using numerical simulations.
Nanowire structures arranged in a hexagonal lattice are to be characterized in terms of their diameter, height and pitch. A scatterometer and an imaging Mueller matrix ellipsometer, which is a combination of a commercial Mueller matrix ellipsometer and a microscope, have been used as measurement tools. These measurements are supported by numerical simulations using the finite element method to characterize the structure parameters.
The different defect types on SiC samples are measured with various measurement methods including optical and tactile methods. The defect types investigated include particles, carrots and triangles and they are analyzed with imaging ellipsometry, coherent Fourier scatterometry and atomic force microscopy. Each of these methods measures different properties of the defects and they all together contribute to a complete analysis.
An imaging Mueller matrix ellipsometer is used to measure structures in measuring fields in the micrometre range, which are too small for conventional ellipsometry. Line and grid structures are measured and evaluated with the help of numerical simulations using the finite element method to characterize the structure parameters.
Zusammenfassung Ellipsometrie ist eine der vielseitigsten Methoden zur optischen Nanostrukturcharakterisierung. Insbesondere die Müller-Matrix-Ellipsometrie ermöglicht die Messung von optischen oder geometrischen Parametern mit Genauigkeiten bis in den Sub-Nanometer-Bereich. In der konventionellen Ellipsometrie wird dabei über die komplette Beleuchtungspunktgröße gemittelt. Wenn der strukturierte Bereich auf der Probe kleiner ist als der Beleuchtungspunkt, oder die Struktur keine Periodizität aufweist, kann das Messergebnis durch in den Randbereichen reflektiertes Licht beeinträchtigt werden. Besonders problematisch ist dies bei freistehenden Nanostrukturen mit charakteristischen Größen kleiner als die Beleuchtungspunktgröße. In solchen Fällen kann abbildende Ellipsometrie genutzt werden. Dabei wird eine Müller-Matrix für jedes Pixel in einem Kamerabild gemessen, wodurch der Polarisationseinfluss der Probe lokal bestimmt wird. In diesem Beitrag liefern wir Ansätze, konkrete Zusammenhänge zwischen geometrischen Eigenschaften von Nanostrukturen auf Nebendiagonalelemente der Müller-Matrix zu ermitteln. Dazu haben wir einen Aufbau für die Messung von Müller-Matrix-Bildern bei verschiedenen Einfallswinkeln in Transmission und Reflexion realisiert sowie eine Probe gefertigt, mit der wir geometrische Struktureigenschaften in Müller-Matrix-Bildern systematisch messen. Wir stellen Messungen sowie numerische Simulationen zum Vergleich der Ergebnisse vor. Des Weiteren diskutieren wir thermische Einflüsse auf Messergebnisse und stellen einen Algorithmus zu deren Behandlung vor.
In the fabrication of optical polymer-based components, such as diffractive gratings and waveguides, high throughput and high precision are required. The non-destructive evaluation of these complex polymer-based structures is a significant challenge. Different measurement techniques can measure the structure geometry directly or via its functionality indirectly. This study investigates various measurement techniques aimed at assessing these structures from 200 nm up to 20 µm. Environmental scanning electron microscopy (ESEM), white light interferometry (WLI), atomic force microscopy (AFM), micro computed tomography (µCT), optical coherence tomography (OCT), phase contrast microscopy (PCM), and Mueller matrix ellipsometry (MME) are investigated for their practical limits of lateral resolution and aspect ratio. The impact of the specimens’ complexity factors, including structure width and aspect ratio, on measurement quality is discussed. A particular focus of this study is on the suitability of different measurement systems for evaluating undercuts and enclosed structures while considering structure size, slant angle, and cover thickness. The aim is to discuss the specific advantages of the individual measurement systems and their application areas in order to be able to quickly select suitable measurement systems for a non-destructive evaluation of polymer-based micro and nanostructures.