The increasing demand for renewable energy sources has led to significant interest in second-generation biofuels derived from lignocellulosic biomass and waste materials. This review underscores the pivotal role of lignocellulosic biomass valorization in meeting global energy needs, mitigating greenhouse gas emissions, and fostering a circular bioeconomy. Key pretreatment methods—including steam explosion, pressure treatment, and chemical pretreatment—are analyzed for their ability to enhance the accessibility of cellulose and hemicellulose in enzymatic saccharification. Advances in cellulolytic enzyme development and fermentation strategies, such as the use of genetically engineered microorganisms capable of fermenting both hexoses and pentoses, are discussed in detail. Furthermore, the potential of biorefinery systems is explored, highlighting their capacity to integrate biomass valorization into biofuel production alongside high-value bioproducts. Case studies and recent trends in bioethanol and biogas production are examined, providing insights into the current state of research and its industrial applications. While lignocellulosic biofuels hold considerable promise for sustainable development and emissions reduction, challenges related to cost optimization, process scalability, and technological barriers must be addressed to enable large-scale implementation. This review serves as a comprehensive foundation for bridging the gap between laboratory research and industrial application, emphasizing the need for continued innovation and interdisciplinary collaboration in biofuel technologies.

Kitchen waste could be processed and recycled into safe fertilizers/soil improvers for sustainable agriculture through different methods: (1) Dried pellets from model kitchen waste treated with anaerobic effective microorganisms; and (2) Anaerobically digested kitchen waste. For comparison, a commercial mineral fertilizer was used. These methods were applied in two separate glasshouse experiments: one under cool (mainly winter) conditions (X–IV) and one under warm (mainly summer) conditions (VI–X) consisting of 3–4 subsequent harvests in northern Poland. Comparing the food waste agronomic performance after anaerobic digestion and effective microorganism treatments, especially under different climatic conditions, is a novel approach. Kitchen waste served as a much better fertilizer than mineral fertilizer, but only during the cool season. In addition, it provided 20–40% more plant yields for dosages >120 kg N/ha and a similar N uptake. In the warm season, in comparison to effective microorganism-incubated kitchen waste, its anaerobic digestion improved the relative agronomic effectiveness twice after 30 days of growth (82% versus 43%). However, the total effectiveness for anaerobically digested kitchen waste versus pelleted and effective microorganism-incubated kitchen waste was 32% versus 27% (N utilization-wise) and 36% versus 21% (plant biomass yield-wise). The Monod kinetic model was applied for the internal efficiency of N utilization; for the best fitting procedure, R² > 0.96 for the cool season and R² > 0.92 for the warm season. Kitchen waste introduced to the soil provided better soil properties than mineral fertilizer. The study contributes to the biological systems for waste recycling in agriculture, bioproduction processes, and the global food chain.

The automotive upholstery industry, which processes bovine leathers, has struggled with vast amounts of solid waste, of which the majority are fractions, such as shavings and splits and offcuts, both containing chromium (Cr) and free of Cr. In this work, a novel leather waste-to-fertiliser approach has been tested: four lightly processed (incubation with effective microorganisms) and three aggressively processed (using pyrolysis or hydrolysis processes) tanned leather waste fractions were used. They were applied as organic nitrogen-based fertilisers in two separate glasshouse experiments, consisting of four subsequent harvests, under spring–autumn conditions in northern Poland. The Cr stressing effect caused by bovine shavings containing Cr and splits and offcuts containing Cr stimulated an increase in ryegrass growth after 30 days, providing twice the dry matter yield than bovine shavings free of Cr and splits and offcuts free of Cr, then (after 90 and 120 days) it inhibited growth. The Monod kinetics model was developed using the best fitting procedure (R² > 0.94) for the efficiency of internal N use in ryegrass for the lightly processed fractions of tanned leather-waste fractions and each harvest. In the case of the processed leather waste-fractions, the relation was quasi linear, evidencing less growth inhibition and no over-fertilisation effects. The acid hydrolysate of bovine shavings containing Cr showed the best performance, reaching a relative agronomic effectiveness (RAE, N utilization-based) equal to 89%, 95%, 19%, and 38% for 30, 60, 90, and 120 days, respectively, and 71% in total. For the lightly processed fractions, it was lower than 12%. The future perspective should focus on steps including scaling up the tests to field conditions; transportation, storage, and application methods; effectiveness for other crops; usage in crop rotation systems; environmental impact assessment; production carbon footprint; commercial potential; and optimizing the production processes.

This article presents the most popular methods of sewage sludge management and analytical techniques which could be a powerful tool in designing new sewage sludge management methods. Chemical analysis is also described as a vital point at the subsequent stages of technological processes control and sewage sludge quality assessment. It is also an instrument essential to maintaining control of processed sewage sludge introduced to the environment as ready-to-use materials. The sludge management method is conditioned by the compliance with legal acts concerning sludge management. The most important of these contain information regarding allowable concentrations of pollutants which can be released into the environment, and the most important declarations concerning sewage sludge management. Various analytical techniques and preparation methods that can be used during the monitoring of the managed and processed sewage sludge are described. The most important are chromatographic techniques, methods based on inductively coupled plasma, and mass spectrometry based methods. Graphical abstract

Municipal landfills generate a significant amount of high-energy biogas, which can be used as a renewable gaseous fuel. However, it is necessary to improve the quality of this biogas due to the presence of various chemical compounds. The most common pollutants in landfill biogas include volatile compounds of silicon, sulphur, phosphorus and chlorine. The aforementioned elements, as well as other metals, were found both in the deposits and in the engine oil. The paper presents detailed characteristics of the solid residues formed in selected parts of gas engines powered by landfill biogas. Its elemental composition and morphology were investigated in order to determine the structure and influence of these deposits. In order to better understand the observed features, selected analyses were also conducted for biogas, engine oil and the condensate generated during biogas dewatering. It was found that the content of individual elements in samples collected from the same part of the gas engine but sourced from various landfills vary. The occurrence of elements in deposits, e.g., Mg, Zn, P and Cr, depends on the location of sampling sites and the type of engine. It was also observed that the deposits formed in parts that come into contact with both biogas and engine oil contain Ca or Zn, which can be related to biogas pollutants as well as different oil additives. The presence of Al, Fe, Cu, Cr, Sn or Pb in selected motor oil samples can be explained by the penetration of metallic abrasives, which confirms the abrasive properties of the formed deposits. The analysis of the characteristic deposits may contribute to the selection of an appropriate landfill biogas purification technology, thus reducing the operating costs of energy cogeneration systems. Finally, we highlight challenges for biogas purification processes and anticipate the direction of future work.