Vladimir Ivancivsky

Dr. Vladimir Ivancivsky

Department of Industrial Machinery Design, Novosibirsk State Technical University, Novosibirsk, Novosibirskaya Oblast’, Russia
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2016 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
Vadim SkeebaVadim Skeeba
Vadim Skeeba
VIVladimir Ivancivsky
Vladimir Ivancivsky
Nikita MartyushevNikita Martyushev
Nikita Martyushev
DLDmitry V. Lobanov
Dmitry V. Lobanov
NVNikita V. Vakhrushev
Nikita V. Vakhrushev
AZAleksey K. Zhigulev
Aleksey K. Zhigulev
It is impossible to improve the most critical performance properties of machine parts without methods of modifying the surface layer using such concentrated energy as laser, plasma, an electron beam or high-frequency currents. For the rational use of these methods, which are characterized by high heating rates, i.e. about 104 ... 105oC/sec a reliable mechanism for determining the processing modes that ensure the required level of quality characteristics of the hardened surface layer of machine parts, is essential. In this paper, the interrelation between the parameter values of thermal cycles, implemented in the surface layer of steel U8, and the modes of electron beam heating in the atmosphere has been determined.

1 December 2014 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
Vadim SkeebaVadim Skeeba
Vadim Skeeba
VIVladimir Ivancivsky
Vladimir Ivancivsky
VPValeriy Pushnin
Valeriy Pushnin
Surface layer modification methods using concentrated energy sources to ensure high heating rates of approximately 104 – 105 °C/s are becoming increasingly common in an attempt to improve operational performance of machine components. As a result, it is quite difficult to determine heat cycle parameters by means of experiments to predict the required intensity and distribution behavior of residual stresses and strains. The paper addresses the issue of numerical simulation of the stress-strain behavior during high energy heating by high frequency currents (HFC HEH). A finite element model has been generated using the ANSYS and SYSWELD software based on numerical computations of differential equations for transient heat conduction (Fourier equation), carbon diffusion (Fick's second law), and the elastic-plastic behavior of the material. The simulation data was verified by full-scale experiments using optical and scanning microscopy and mechanical and X-ray methods to determine residual stresses. It has been established that the level of residual compressive stresses on the component surface can be from-500 to-1000 MPa within the range of HFC HEH process variations under review. It is proven in theory and confirmed by experiments that the transition layer thickness must amount to 25 – 33 % of the hardened layer depth for the tensile stress peak to shift to deeper material layers while compressive stresses on the surface decrease by 6 – 10 %, in order to prevent hardening cracks.

1 August 2015 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
AYAlexander Yanyushkin
Alexander Yanyushkin
DLDmitry V. Lobanov
Dmitry V. Lobanov
PAPavel V. Arkhipov
Pavel V. Arkhipov
VIVladimir Ivancivsky
Vladimir Ivancivsky
The relevance of investigating the problem of loading a diamond abrasive tool with a metallic binder to improve the efficiency of finishing treatment of a wide range of high-strength materials is addressed in the paper. The results of theoretical and experimental studies of the formation of a greasy layer on the surface of diamond wheels in the treatment of high-strength materials are shown. In the theoretical part it is proposed to consider this phenomenon in terms of the equilibrium state of electrochemical potentials at the interface of a diamond wheel and the treated surface. Dependences are revealed that help to determine greasy layer values. The practical part of this work consists in electron-microscopic, spectroscopic and X-ray diffraction studies of wheel specimens with a metallic binder in diamond grinding. Based on the results obtained the composition and structure of a greasy layer are determined. A comparison of the experimental data with the calculated values confirms the adequacy of the proposed theory. The use of combined methods to improve the efficiency of machining high-strength materials is recommended. It can help to reduce the intensity of loading and to improve the cutting properties of diamond abrasive tools with a metallic binder

27 April 2016 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
VSV Yu Skeeba
V Yu Skeeba
VIVladimir Ivancivsky
Vladimir Ivancivsky
AKA V Kutyshkin
A V Kutyshkin
KPK A Parts
K A Parts
The comparative analysis of the two hybrid process technologies, which are based on the integration of mechanical treatment (abrasive grinding or turning) and a surface heat strengthening by high frequency current on the same processing equipment, is given in the paper. The acquired results demonstrate that the suggested integrating approach allows carrying out the processing on the one technological base, which leads to the increase in the quality of the machine parts surface layer. The conducted experimental research proves that a minor stock allowance value for the final mechanical processing (sparking out or diamond smoothing) ensures the absence of defects such as local abatement zones and provides strain hardening of the work piece surface. This leads to the formation of the work-hardened layer of 0.01 - 0.03 mm, increase in microhardness value by 12 - 17% and the level of residual compressive stress in the surface layer by 10 - 21 % respectively.

1 April 2016 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
VSV Yu Skeeba
V Yu Skeeba
VIVladimir Ivancivsky
Vladimir Ivancivsky
DLD V Lobanov
D V Lobanov
AZA K Zhigulev
A K Zhigulev
PSP Yu Skeeba
P Yu Skeeba
The present study has found that during the integrated processing after the diamond smoothing, in the surface-hardened sample a cold-worked layer 0.01 ... 0.02 mm in thickness, the microhardness value of which reaches 868 HV, is formed. The intensity of compressive stresses on the part surface increases to στ = -678 MPa. The analysis of the experimental data has shown the relationship between the parameter Ra and the processing modes that can be used during diamond smoothing, based on the high performance and the desired surface roughness. It has been found that the minimum value of roughness Ra = 0.18±0.08 μm is reliably achieved by smoothing processing when the smoothing force Py ranges from 100 N to 150 N.

1 August 2015 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
VIVladimir Ivancivsky
Vladimir Ivancivsky
KPKristina Parts
Kristina Parts
VPVyacheslav Popov
Vyacheslav Popov
KTKristina A. Titova
Kristina A. Titova
Quenching of steel 45 using high-frequency induction-heating (440000 Hz) with simultaneous shower water cooling was studied. The possibility of liquid-phase creation in the bulk (appr. 0.2 mm) in the material being treated in the absence of melting on the surface was clearly demonstrated by both numerical simulation of the temperature field in the material during hardening and experimental results