It is expected that different energy infrastructures and resources to be operated and planned simultaneously in the future smart energy systems. Recently, the concept of energy hub and its corresponding management systems has been proposed in multi‐carrier energy systems. The presented study develops a two‐stage stochastic mixed‐integer linear programming model for a day‐ahead energy scheduling of a multi‐carrier energy system, considering the time‐varying energy price signals and volatility feature of renewable energy resources. In the framework of the proposed method, the objective is set to minimise the energy hub's total cost, while finding the optimal values for decision variables. A set of valid scenarios is considered for the uncertainties of loads and solar energy resources. Finally, the proposed stochastic day‐ahead optimisation is tested in a case study situation. In the process of minimising the operational cost, an energy hub operator is able to fix some decisions such as energy exchange with the main grid and unit commitment, before the actual realisation of the uncertain parameters is observed. The unit commitment results also are compared with those produced by a deterministic model for the case in which the electricity flow is bidirectional.
6 June 2012 in IET Generation, Transmission & Distribution
One of the main issues in distribution sector is to achieve simultaneously high system reliability and low capital costs. Distribution automation systems (DASs) involve automatic and remote-controlled switches. The switches play a significant role in system reliability improvement. This paper proposes the modified shuffled frog leaping algorithm (SFLA) to derive the optimal placement of manual and automatic switches in DASs. A fuzzy approach is used to handle the multi objective considerations, and a fuzzy membership function is defined for each term in the objective function. The first objective is reliability improvement by minimising the customer interruption cost (CIC), and the second objective is to minimise switches purchasing and maintenance cost (SPMC). In this paper, a new method is developed to evaluate CIC and SPMC indices in a distribution network. In the proposed method, customer types, customers load patterns, monthly, daily and hourly customers loading rates are considered. In addition, network branches’ failure rate, restoration time and repair time are taken into account. The performance of the proposed approach is assessed and illustrated by studying on the IEEE 123-node feeder standard test system. The simulation results verify the capability of the proposed method.
1 October 2013 in International Journal of Electrical Power & Energy Systems
In this article, three dual‐stator axial field flux‐switching permanent magnet (DS‐AFFSPM) topologies are selected, designed, and analysed in order to determine the most effective structure electric vehicle (EV) application based on torque density, power density, and efficiency. Accordingly, the introduced topologies are thoroughly compared in the same condition. The results show that, the high‐power density, high‐torque density, and high‐efficiency, of the internal single‐teeth rotor DS‐AFFSPM topology is a suitable candidate for EV application because it has the lowest torque ripple.
26 August 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Virtual flux droop (VFD) method is a scheme, in which, instead of frequency and voltage amplitude, the phase angle and amplitude of the virtual flux are respectively adjusted to active and reactive power sharing. However, mismatched line impedances lead to improper power sharing. An adaptive virtual flux droop (AVFD) control strategy is proposed in this paper to solve this problem. Firstly, the effect of the mismatched line impedances on the VFD method is analyzed. Then, the idea of virtual impedance is employed to develop the AVFD control strategy. In addition, a small-signal model is presented which is used to tune the control parameters. Furthermore, the microgrid control approach is made based on the direct flux control (DFC) method to apply the proposed strategy. The resultant control scheme is simple without needing multiple feedback loops and complex transformations. In order to validate feasibility and effectiveness of the proposed control strategy, both simulation and experimental studies are implemented. The results show that by the proposed method, accurate power sharing proportional to the ratings of the sources can be achieved in spite of mismatched line impedances.
This study introduces a novel hybrid modeling approach that combines magnetic equivalent circuit (MEC) and two-dimensional (2-D) analytical methods. The proposed method involves placing PMs on the stator bore in two forms: virtual permanent magnets (VPMs) or virtual volume currents (VVCs). To account for the effect of rotor teeth, analytical modeling is completed using virtual surface currents (VSCs). This hybrid modeling approach enables the calculation of the air gap magnetic flux density for the first time in an axial-field flux-switching bar-permanent magnet (AFFSBPM) motor. Because of the stator’s inner PM and doubly salient nature, the 2-D analytical model for AFFSBPMs is more difficult to solve. Therefore, the proposed method accurately with fast 2-D analytical by The Laplace/Poisson equations are solved and boundary conditions are applied to calculate the tangential and vertical flux components of the flux density distribution in the air-gap AFFSBPM motor. The 3-D finite element method (FEM) is used to verify the proposed method and the findings obtained.