In this article, three dual‐stator axial field flux‐switching permanent magnet (DS‐AFFSPM) topologies are selected, designed, and analysed in order to determine the most effective structure electric vehicle (EV) application based on torque density, power density, and efficiency. Accordingly, the introduced topologies are thoroughly compared in the same condition. The results show that, the high‐power density, high‐torque density, and high‐efficiency, of the internal single‐teeth rotor DS‐AFFSPM topology is a suitable candidate for EV application because it has the lowest torque ripple.
5 November 2023 in IET Electric Power Applications
The two‐dimensional (2D) analytical model for the calculation of the components of the flux density distribution in the air gap in a dual‐stator axial‐field flux‐switching permanent magnet (PM) motor (DSAFFSPM) is presented. The novelties of this study are deriving a 2D hybrid analytical model and replacing the rotor teeth with some surface currents for the calculation of air‐gap magnetic flux density for the first time in the DSAFFSPM motor. The 2D analytical model for DSAFFSPMs is more challenging due to the doubly salient structure and inner PM of the stator. 1D analytical interior PMs are first transferred to the bore of the stator body using the magnetic equivalent circuit model (MEC). Next, the effects of the rotor teeth are taken into consideration by injecting virtual surface currents for 2D analytical model. Applying boundary conditions and solving the Laplace/Poisson equations, the vertical and tangential flux components of the flux density distribution in the air‐gap DSAFFSPM motor are computed. The verification of the proposed method and the obtained results are validated by the 3D finite element method.
This study introduces a novel hybrid modeling approach that combines magnetic equivalent circuit (MEC) and two-dimensional (2-D) analytical methods. The proposed method involves placing PMs on the stator bore in two forms: virtual permanent magnets (VPMs) or virtual volume currents (VVCs). To account for the effect of rotor teeth, analytical modeling is completed using virtual surface currents (VSCs). This hybrid modeling approach enables the calculation of the air gap magnetic flux density for the first time in an axial-field flux-switching bar-permanent magnet (AFFSBPM) motor. Because of the stator’s inner PM and doubly salient nature, the 2-D analytical model for AFFSBPMs is more difficult to solve. Therefore, the proposed method accurately with fast 2-D analytical by The Laplace/Poisson equations are solved and boundary conditions are applied to calculate the tangential and vertical flux components of the flux density distribution in the air-gap AFFSBPM motor. The 3-D finite element method (FEM) is used to verify the proposed method and the findings obtained.
1 January 2024 in International Journal of Engineering
In this paper, a new dual-stator axial field flux-switching permanent magnet (DSAFFSPM) motor has been proposed to improve the torque density and cost of the machine. In this topology, the 12-pole dual-stator has been located on both sides of one 10-pole inner-toothed rotor. The dual-stator has hosted permanent magnet (PM) type of Bar-PM and the coils. The novelty of this study is development of a technique that can be implemented on PM of the DSAFFSPM structure. In this regard, the proposed analytical design with a sizing equation has been presented and multi-objective optimization is employed to achieve the optimum size by Multi-Objective Genetic Algorithm (MOGA) method. The machine characteristics are acquired and analyzed utilizing the 3D finite element method (3D-FEM). A comparative study has been done to prove the superiority of the performance indices. This topology demonstrates the high-power density and the low vibration and noise due to lower torque ripple and cogging torque. Meanwhile, the Bar-PM topology has lower core loss and thermal stress due to high-efficiency. Consequently, the proposed model provides high torque density and low cost, specifically designed for electric vehicle (EVs) applications.
The increasing concerns surrounding demagnetization risk and fault tolerance in direct-drive in-wheel motor applications prompt a detailed investigation. This paper delves into the demagnetization risk of Permanent Magnets (PM) and fault tolerance for three motor topologies sharing similar characteristics: diameter, volume, output power, and the number of PMs. The three configurations, namely the Internal Single Teeth Rotor (ISTR), Internal Dual Yoke Rotor (IDYR), and External Dual Yoke Rotor (EDYR), are thoroughly analyzed under various operating conditions, providing a comprehensive comparison from the perspectives of PM demagnetization risk and fault tolerance. The analysis encompasses eccentricity rotor fault examinations to assess fault tolerance, thermal analysis to evaluate thermal performance, and an all-encompassing demagnetization assessment under diverse operating conditions for these three topologies. The findings are substantiated through rigorous 3-D finite element method (FEM) validation.
This paper compares two types of interior permanent magnet synchronous motors (IPMSMs) to determine the most effective arrangement for electric vehicle (EV) applications. The comparison is based on torque ripple, power, efficiency, and mechanical objectives. The study introduces a novel technique that optimizes notching parameters in a selected motor topology by inserting a ship-shaped notch into the bridge area between double U-shaped layers. In addition, this study presents two comprehensive approaches of robust combinatorial optimization that are used in machines for the first time. In the first approach, modeling is performed to identify important variables using Pearson Correlation and the mathematical model of the Anisotropic Kriging model from the Surrogate model. Then, in the second approach, the proposed algorithm, Multi-Objective Genetics Algorithm (MOGA), and Surrogate Quadratic Programming (SQP) are combined and implemented on the Anisotropic Kriging model to choose a robust model with minimum error. The algorithm is then verified with FEM results and compared with other conventional optimization algorithms, such as the Genetics Algorithm (GA) and the Particle Swarm Optimization algorithm (PSO). The motor characteristics are analyzed using the Finite Element Method (FEM) and global map analysis to optimize the performance of the IPMSM for EV applications. A comparative study shows that the enhanced PMSM developed through the optimization process demonstrates superior performance indices for EVs.