In this study, a kilowatt-level high-efficiency narrow-linewidth all-fiber Tm3+-doped continuous-wave laser operating at 1.95 μm is demonstrated. Benefitting from an advanced boost design of a two-stage main amplifier, it not only effectively manages heat dissipation resulting from the high pump-induced quantum defect but also realizes the controlled extraction of optical gain and improves the optical conversion efficiency. Finally, this laser system has realized an output power of 1018 W, a linewidth of 3.8 GHz, and a slope efficiency of 60.0% simultaneously. Moreover, a high optical signal-to-noise ratio of over 45 dB and excellent beam quality of M2 factors 1.19 are obtained. To the best of our knowledge, this represents the narrowest linewidth and highest slope efficiency achieved in a kilowatt-level Tm³⁺-doped fiber laser. Such a high-performance laser is ideally suited for mid-infrared generation and remote sensing applications.
A high-power narrow-linewidth fiber laser with single-mode beam quality is experimentally demonstrated. By employing a cascaded phase modulation strategy, the stimulated Brillouin scattering (SBS) threshold of the laser is effectively increased from 973 W to 1970 W. High-order modes are well suppressed during power scaling, benefiting from the significant bending loss of a low numerical aperture (NA) ytterbium-doped fiber. A maximum output power of 1970 W is achieved, with a linewidth of 3.2 GHz and a beam quality factor M2 of 1.14. To the best of our knowledge, this represents the highest reported output power for narrow-linewidth fiber lasers (linewidth < 10 GHz) operating at wavelengths below 1040 nm.