Qiang Shen

Qiang Shen


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2017 in Materials
Verified
Journal Article
Open access
PDF file
QSQiang Shen
Qiang Shen
WZWei Zhou
Wei Zhou
GRGuang Ran
Guang Ran
RLRuixiang Li
Ruixiang Li
QFQijie Feng
Qijie Feng
NLNing Li
Ning Li
The single crystal 6H-SiC with [0001] crystal direction irradiated by 400 keV He+ ions with 1 × 1017 ions/cm2 fluence at 400 °C were annealed at 600, 900, 1200 and 1400 °C for different durations. The evolution of helium bubbles and discs was investigated by transmission electron microscopy. An irradiated layer distributed with fine helium bubbles was formed with a width of ~170 nm after helium ion irradiation. The size of gas bubbles increased with increasing annealing time and temperature and finally reached stable values at a given annealing temperature. According to the relationship between the bubble radii and annealing time, an empirical formula for calculating the bubble radii at the annealing temperature ranged from 600 to 1400 °C was given by fitting the experiment data. Planar bubble clusters (discs) were found to form on (0001) crystal plane at both sides of the bubble layer when the annealing temperature was at the range of 800–1200 °C. The mechanism of bubble growth during post-implantation annealing and the formation of bubble discs were also analyzed and discussed.

11 February 2018 in Materials
Verified
Journal Article
Open access
PDF file
QSQiang Shen
Qiang Shen
GRGuang Ran
Guang Ran
WZWei Zhou
Wei Zhou
CYChao Ye
Chao Ye
QFQijie Feng
Qijie Feng
NLNing Li
Ning Li
Light ion implantation is one of the important procedures of smart cut for SiC-based semiconductor fabrication. This work investigated the surface morphologies and microstructures of single crystal 6H-SiC irradiated by one or both of H2+ and He+ ions at room temperature and then annealed at specific temperatures. Blisters evolved from the coalescence of H nanocracks were formed in the H2+ and He++H2+ irradiated sample surface, while circular ripples originated from the pressure release of helium bubbles after high temperature annealing were formed in the He+ irradiated sample surface. The lateral radius a of the blisters in the irradiated sample with low H2+ fluence was larger than that in the irradiated sample with high H2+ fluence and with He++H2+ ions. About 8–58% of implanted H atoms contributed to the formation of the blisters. Compared with other irradiated samples, the ratio of w0/a and the density of the blisters in the He++H2+ irradiated samples were largest. The stress field of the blisters was simulated using finite element method and the inner pressure in the blisters was also calculated. The corresponding mechanism was analyzed and discussed.

25 October 2017 in Materials
Verified
Journal Article
Open access
PDF file
CYChao Ye
Chao Ye
GRGuang Ran
Guang Ran
WZWei Zhou
Wei Zhou
QSQiang Shen
Qiang Shen
QFQijie Feng
Qijie Feng
JLJianxin Lin
Jianxin Lin
Single crystal 6H-SiC wafers with 4° off-axis [0001] orientation were irradiated with carbon ions and then annealed at 900 °C for different time periods. The microstructure and surface morphology of these samples were investigated by grazing incidence X-ray diffraction (GIXRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Ion irradiation induced SiC amorphization, but the surface was smooth and did not have special structures. During the annealing process, the amorphous SiC was recrystallized to form columnar crystals that had a large amount of twin structures. The longer the annealing time was, the greater the amount of recrystallized SiC would be. The recrystallization volume fraction was accorded with the law of the Johnson–Mehl–Avrami equation. The surface morphology consisted of tiny pieces with an average width of approximately 30 nm in the annealed SiC. The volume shrinkage of irradiated SiC layer and the anisotropy of newly born crystals during annealing process produced internal stress and then induced not only a large number of dislocation walls in the non-irradiated layer but also the initiation and propagation of the cracks. The direction of dislocation walls was perpendicular to the growth direction of the columnar crystal. The longer the annealing time was, the larger the length and width of the formed crack would be. A quantitative model of the crack growth was provided to calculate the length and width of the cracks at a given annealing time.

15 October 2016 in Materials
Verified
Journal Article
Open access
PDF file
YLYong Luo
Yong Luo
GRGuang Ran
Guang Ran
NCNanjun Chen
Nanjun Chen
QSQiang Shen
Qiang Shen
Yaoli ZhangYaoli Zhang
Yaoli Zhang
The microstructural evolution, thermodynamics, and kinetics of Mo (21 wt %) Tm2O3 powder mixtures during ball milling were investigated using X-ray diffraction and transmission electron microscopy. Ball milling induced Tm2O3 to be decomposed and then dissolved into Mo crystal. After 96 h of ball milling, Tm2O3 was dissolved completely and the supersaturated nanocrystalline solid solution of Mo (Tm, O) was obtained. The Mo lattice parameter increased with increasing ball-milling time, opposite for the Mo grain size. The size and lattice parameter of Mo grains was about 8 nm and 0.31564 nm after 96 h of ball milling, respectively. Ball milling induced the elements of Mo, Tm, and O to be distributed uniformly in the ball-milled particles. Based on the semi-experimental theory of Miedema, a thermodynamic model was developed to calculate the driving force of phase evolution. There was no chemical driving force to form a crystal solid solution of Tm atoms in Mo crystal or an amorphous phase because the Gibbs free energy for both processes was higher than zero. For Mo (21 wt %) Tm2O3, it was mechanical work, not the negative heat of mixing, which provided the driving force to form a supersaturated nanocrystalline Mo (Tm, O) solid solution.

28 December 2016 in Materials
Verified
Journal Article
Open access
PDF file
JHJinhua Huang
Jinhua Huang
GRGuang Ran
Guang Ran
JLJianxin Lin
Jianxin Lin
QSQiang Shen
Qiang Shen
Penghui LeiPenghui Lei
Penghui Lei
NLNing Li
Ning Li
The microstructural evolution of Dy2O3-TiO2 powder mixtures during ball milling and post-milled annealing was investigated using XRD, SEM, TEM, and DSC. At high ball-milling rotation speeds, the mixtures were fined, homogenized, nanocrystallized, and later completely amorphized, and the transformation of Dy2O3 from the cubic to the monoclinic crystal structure was observed. The amorphous transformation resulted from monoclinic Dy2O3, not from cubic Dy2O3. However, at low ball-milling rotation speeds, the mixtures were only fined and homogenized. An intermediate phase with a similar crystal structure to that of cubic Dy2TiO5 was detected in the amorphous mixtures annealed from 800 to 1000 °C, which was a metastable phase that transformed to orthorhombic Dy2TiO5 when the annealing temperature was above 1050 °C. However, at the same annealing temperatures, pyrochlore Dy2Ti2O7 initially formed and subsequently reacted with the remaining Dy2O3 to form orthorhombic Dy2TiO5 in the homogenous mixtures. The evolutionary mechanism of powder mixtures during ball milling and subsequent annealing was analyzed.

27 September 2016 in Preprints.org
Verified
Preprint
Open access
PDF file
YLYong Luo
Yong Luo
GRGuang Ran
Guang Ran
NCNanjun Chen
Nanjun Chen
QSQiang Shen
Qiang Shen
Yaoli ZhangYaoli Zhang
Yaoli Zhang
The microstructural evolution, thermodynamics and kinetics of Mo-21%Tm2O3 (mass fraction, %) powder mixtures during ball milling were investigated using X-ray diffraction and transmission electron microscopy. Ball milling induced Tm2O3 to be decomposed and then dissolved into Mo crystal. The supersaturated nanocrystalline solid solution of Mo (Tm, O) was obtained after 96 h of ball milling. The elements of Mo, Tm and O were distributed uniformly in the ball-milled particles. Based on the semi-experimental theory of Miedema, a thermodynamic model was developed to calculate the driving force of phase evolution. There was no chemical driving force to form a crystal solid solution of Tm atoms in Mo crystal or an amorphous phase because the Gibbs free energy for both processes was higher than zero. For Mo-21%Tm2O3, it was mechanical work, not negative heat of mixing, that provided the driving force to form supersaturated nanocrystalline Mo (Tm, O) solid solution.