Finding materials with specific properties is a hot topic in materials science. Traditional materials design relies on empirical and trial-and-error methods, requiring extensive experiments and time, resulting in high costs. With the development of physics, statistics, computer science, and other fields, machine learning offers opportunities for systematically discovering new materials. Especially through machine learning-based inverse design, machine learning algorithms analyze the mapping relationships between materials and their properties to find materials with desired properties. This paper first outlines the basic concepts of materials inverse design and the challenges faced by machine learning-based approaches to materials inverse design. Then, three main inverse design methods—exploration-based, model-based, and optimization-based—are analyzed in the context of different application scenarios. Finally, the applications of inverse design methods in alloys, optical materials, and acoustic materials are elaborated on, and the prospects for materials inverse design are discussed. The authors hope to accelerate the discovery of new materials and provide new possibilities for advancing materials science and innovative design methods.
Potassium (K+) ion is an important biological substance in the human body and plays a critical role in the maintenance of transmembrane potential and hormone secretion. Several detection techniques, including fluorescent, electrochemical, and electrical methods, have been extensively investigated to selectively recognize K+ ions. In this work, a highly sensitive and selective biosensor based on single-layer graphene has been developed for K+ ion detection under Van der Pauw measurement configuration. With pre-immobilization of guanine-rich DNA on the graphene surface, the graphene devices exhibit a very low limit of detection (≈1 nM) with a dynamic range of 1 nM–10 μM and excellent K+ ion specificity against other alkali cations, such as Na+ ions. The origin of K+ ion selectivity can be attributed to the fact that the formation of guanine-quadruplexes from guanine-rich DNA has a strong affinity for capturing K+ ions. The graphene-based biosensors with improved sensing performance for K+ ion recognition can be applied to health monitoring and early disease diagnosis.
The commercial Al-5.72Zn-2.36Mg-1.66Cu (7075) alloys were prepared by the spray Conform (SC) technique consisting of the spray forming and Conform extrusion. The extrusion ratio (ER) was selected as the variable parameter to study the influence mechanism on the microstructures and properties while keeping the other parameters unchanged. The microstructures and properties were investigated by scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), x-ray diffraction (XRD), electron backscatter diffraction (EBSD) and tensile tests. Concretely, the changing rules of the grains, second phases, tensile strength and elongation with ER were researched respectively. Results indicate that a fine equiaxed grain microstructure with low level of segregation and porosity was achieved by SC. And the intergranular and intragranular phases were fine and homogeneous before and after retrogression and re-aging (RRA). The dispersion and tensile strength are positive to ER, but the grain size (GS) is inverse. Meanwhile, the elongation increases firstly and then decreases with increasing ER.