The authors present depletion-mode -channel GaAs metal-oxide-semiconductor field-effect transistor (MOSFET) with a TaN gate electrode, a thin gate dielectric, and a thin germanium (Ge) interfacial passivation layer (IPL). Depletion-mode MOSFET on the molecular-beam epitaxy-grown -type GaAs layer with an equivalent oxide thickness of exhibits excellent transistor output characteristics such as a maximum transconductance of and a maximum effective electron mobility of . MOSFET shows a surface accumulation channel conduction above flatband condition, indicating that a high quality interface can be achieved using a Ge IPL on GaAs substrate.
In this work, using Si interface passivation layer (IPL) we present the electrical characteristics of TaN/HfO2/GaAs both p-and n-MOSFET made on GaAs substrates with excellent electrical and reliability characteristics, thin EOT (~2.3-3.0nm), low frequency dispersion (< 5%) and high maximum mobility (1213 cm2/V-s) with high temperature PMA for n-MOSFET on undoped GaAs. Good inversion behavior with low Dit on lightly doped p-type GaAs has been obtained. P-channel GaAs high-k MOSFETs with excellent peak mobility have also been demonstrated
We present the results of investigations of film growth on Si by conventional chemical beam epitaxy (CBE) and by alternating gas flow deposition with alkoxide precursors. Both growth methods produced films with an intervening interface amorphous layer, whose thickness depends strongly on growth and annealing temperatures. While films grown by chemical beam epitaxy were always polycrystalline, the films grown by alternating gas flow deposition were oriented materials. Based on our studies, we hypothesize that the alternating layer deposition technique enhances bulk interdiffusion efficiency of metal ions leading to a more controlled epitaxy of on Si relative to conventional CBE growth.
13 August 2014 in Journal of Vacuum Science & Technology B
A study of heteroepitaxial molecular beam epitaxy growth of strained p-channel InGaSb quantum well (QW) on lattice mismatched Si (100) using Al(Ga)Sb metamorphic buffers is presented in this paper. The migration enhanced epitaxy (MEE) technique was employed for AlSb nucleation layer (NL) on Si and analyzed using atomic force microscopy and in-situ Auger electron spectroscopy techniques to optimize growth conditions for continuous 2D buffer layers and improve surface quality of subsequent layers. Growth-related defects (threading dislocations, microtwins, and antiphase boundaries) and their effect on surface morphology and electrical properties of the QWs are analyzed with scanning electron microscope and transmission electron microscopy and correlated to the NL properties. The baseline data for defect density in the layers and resultant surface morphology are presented. Room temperature p-channel Hall mobility of 660 cm2/V s at 3 × 1011 cm−2 sheet hole concentration is achieved in InGaSb QWs using an optimized 15 monolayer AlSb MEE NL at 300 °C growth temperature.
With the rapid advancement of Artificial Intelligence-driven object recognition, the development of cognitive tunable imaging sensors has become a critically important field. In this paper, we demonstrate an infrared (IR) sensor with spectral tunability controlled by the applied bias between the long-wave and mid-wave IR spectral regions. The sensor is a Quantum Well Infrared Photodetector (QWIP) containing asymmetrically doped double QWs where the external electric field alters the electron population in the wells and hence spectral responsivity. The design rules are obtained by calculating the electronic transition energies for symmetric and antisymmetric double-QW states using a Schrödinger–Poisson solver. The sensor is grown and characterized aiming detection in mid-wave (~5 µm) to long-wave IR (~8 µm) spectral ranges. The structure is grown using molecular beam epitaxy (MBE) and contains 25 periods of coupled double GaAs QWs and Al0.38Ga0.62As barriers. One of the QWs in the pair is modulation-doped to provide asymmetry in potential. The QWIPs are tested with blackbody radiation and FTIR down to 77 K. As a result, the ratio of the responsivities of the two bands at about 5.5 and 8 µm is controlled over an order of magnitude demonstrating tunability between MWIR and LWIR spectral regions. Separate experiments using parameterized image transformations of wideband LWIR imagery are performed to lay the framework for utilizing tunable QWIP sensors in object recognition applications.