This letter presents a novel tilt-rotor octocopter that can generate tiltable thrust without the need for servo-driven mechanisms. The octocopter's eight rotors are divided into pairs and each pair is mounted on an arm, which is connected to the airframe through passive hinges. Each pair is also equipped with a sub-controller that uses the differential thrust of the rotor pair to control the arm's tilting angle. Then, these sub-controllers work together with the main controller installed on the frame body to regulate the attitude and position of the octocopter. This octocopter can be controlled via a remote controller in a manner similar to a classic quadrotor, operating in stabilized or position mode both indoors and outdoors, also capable of executing flight missions following predefined trajectories. Considering that the communication delays between the main controller and sub-controllers would degrade the control performance due to the delayed response of the vectored thrust. We also propose a decentralized control allocation strategy that directly assigns parts of control loops to the sub-controllers so that the communication delays can be bypassed. Finally, we demonstrate the advantages of the new octocopter with the proposed method through simulations and real flight experiments.
Servo-free tilt-rotor UAVs decouple position and attitude control without using servos, which cuts structural weight and removes the travel limits of traditional designs. In many applications—such as aerial platform operations and airborne photogrammetry—large attitude changes are required during hover. Conventional control-allocation schemes tend to distribute thrust unevenly, making actuators prone to saturation. To overcome these challenges, we propose a thrust-balancing control-allocation strategy specifically for passive-hinge tilt-rotor octocopters. The presented method integrates min–max optimization with the force decomposition (FD) algorithm, effectively handling actuator saturation while maintaining low computational complexity. Additionally, an offline-trained neural network is employed to replace the online optimization process, enabling the complete controller to operate on the flight control board without relying on an onboard computer. Simulation and experiment results confirm the effectiveness of the proposed strategy, demonstrating enhanced control performance and its practical feasibility for real-world UAV applications.
2 April 2025 in IEEE Robotics and Automation Letters
This paper presents a complete quadrotor aerial docking system that utilizes both vision and magnetic field guidance to achieve high-precision docking. Visual guidance is implemented using a combination of a forward-facing camera and an upward-facing camera, which provide feedback on the local and relative positions, respectively. Magnetic guidance is realized through electromagnets on the quadrotor and permanent magnets at the docking site. The visual system provides guidance for the quadrotor to approach the target point, while the opposing magnetic poles attract and align with each other, cooperating with the quadrotor's four rotors to ensure accurate docking. In the visual guidance system, an intermediate coordinate frame is established to ensure consistent position feedback from the two sets of cameras. Meanwhile, the use of magnetic guidance enables a rapid and low-cost docking solution with greater scalability compared to mechanical docking devices. To coordinate the quadrotor's actuators with the magnetic force from the docking device, a magnetic field model is integrated into the flight controller. The model's parameters are identified offline using a simple, self-made measurement device, which collects data to train a precise model. This model is then used as a virtual sensor to provide real-time feedback. A quadratic programming (QP) problem is then formulated in the control allocation module, allowing the quadrotor's actuators to effectively coordinate with the magnetic field and guide the quadrotor to the docking point. Both simulations and experimental results validate the feasibility of the proposed system.
Spatial beamforming is an effective method for designing integrated sensing and communication (ISAC) waveforms. Since the power of each antenna is individually limited by its power amplifier, the per antenna power constraint (PAPC) is actually more realistic than the sum power antenna constraint. In this paper, we propose an ISAC precoding design under the PAPC in the presence of signal-dependent clutter sources. Based on the fractional programming approach, we transform the original non-convex problem into a more manageable optimization problem, and then apply the block coordinate descent (BCD) method to solve it. In addition, to handle the slow convergence problem of the BCD based algorithm when the number of antennas is large, we further propose a fast convergence algorithm based on the manifold optimization. Simulation results show that our two proposed algorithms significantly outperform the existing algorithms and achieve a better trade-off between communication and radar performance for the ISAC systems with the PAPC.