Luana Gurnari

Dr. Luana Gurnari

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 July 2020 in Hydrology
Verified
Journal Article
Open access
PDF file
PFPasquale G. F. Filianoti
Pasquale G. F. Filianoti
LGLuana Gurnari
Luana Gurnari
Demetrio Antonio ZemaDemetrio Antonio Zema
Demetrio Antonio Zema
Giuseppe BombinoGiuseppe Bombino
Giuseppe Bombino
Marco SinagraMarco Sinagra
Marco Sinagra
Tullio TucciarelliTullio Tucciarelli
Tullio Tucciarelli
In order to predict and control the impacts of floods in torrents, it is important to verify the simulation accuracy of the most used hydrological models. The performance verification is particularly needed for applications in watersheds with peculiar climatic and geomorphological characteristics, such as the Mediterranean torrents. Moreover, in addition to the accuracy, other factors affect the choice of software by stakeholders (users, modellers, researchers, etc.). This study introduces a “performance matrix”, consisting of several evaluation parameters weighted by stakeholders’ opinions. The aim is to evaluate the accuracy of the flood prediction which is achieved by different models, as well as the pros and cons of software user experience. To this aim, the performances and requisites of four physical-based and conceptual models (HEC-HMS, SWMM, MIKE11 NAM and WEC-FLOOD) have been evaluated, by predicting floods in a midsized Mediterranean watershed (Mèsima torrent, Calabria, Southern Italy). In the case study, HEC-HMS and MIKE 11 NAM were the best computer models (with a weighted score of 4.45 and 4.43, respectively), thanks to their low complexity and computation effort, as well as good user interface and prediction accuracy. However, MIKE11 NAM is not free of charge. SWMM showed a lower prediction accuracy, which put the model in third place of the four models. The performance of WEC-FLOOD, although not being as good as for the other tested models, can be considered overall acceptable in comparison to the other well-consolidated models, considering that WEC-FLOOD is in the early stage of development. Overall, the proposal of the performance matrix for hydrological models may represent a first step in building a more complete evaluation framework of the hydrological and hydraulic commercial models, in order to give indications to allow potential users to make an optimal choice.

4 October 2021
Verified
Conference Paper
Closed access
Egidio D’AmatoEgidio D’Amato
Egidio D’Amato
CCClaudio De Capua
Claudio De Capua
PFPasquale Fabio Filianoti
Pasquale Fabio Filianoti
LGLuana Gurnari
Luana Gurnari
VNVito Antonio Nardi
Vito Antonio Nardi
VSValerio SCORDAMAGLIA
Valerio SCORDAMAGLIA
Sensor fault detection and isolation (SFDI) is a fundamental topic in unmanned underwater vehicles (UUV) development, since control system reliability strongly depends on the accuracy of attitude estimation. In small UUVs, typical redundant architectures, based on triplex redundancy, can represent a strong limitation in terms of payload and power consumption. This work proposes an FDI algorithm for small UUVs equipped with duplex sensor architecture. Here, attitude estimation relies upon the usage of two 9-DoF inertial measurement units (IMUs) including 3-axis accelerometers, gyroscopes and magnetometers. The proposed SFDI algorithm is based on an unscented Kalman filter (UKF) approach to efficiently detect and isolate faulted IMU sensors. Its effectiveness and robustness were proved through experimental tests involving realistic faults on a real underwater vehicle. A sensitivity analysis was carried out on the relevant algorithm parameters in order to find a trade-off between performance, computational burden and reliability.

6 January 2020 in Energies
Verified
Journal Article
Open access
PDF file
LGLuana Gurnari
Luana Gurnari
PFPasquale G. F. Filianoti
Pasquale G. F. Filianoti
Marco TorresiMarco Torresi
Marco Torresi
Sergio CamporealeSergio Camporeale
Sergio Camporeale
Oscillating water column (OWC) devices, either fixed or floating, are the most common wave energy converter (WEC) devices. In this work, the fluid dynamic interaction between waves and a U-shaped OWC breakwater embedding a Wells turbine has been investigated through unsteady Computational Fluid Dynamic (CFD) simulations. The full-scale plant installed in the harbor of Civitavecchia (Italy) was numerically modeled. A two-dimensional domain was adopted to simulate the unsteady flow, both outside and inside the U-OWC device, including the air chamber and the oscillating flow inside the conduit hosting the Wells turbine. For the numerical simulation of the damping effect induced by the Wells turbine connected to the air chamber, a porous medium was placed in the computational domain, representing the conduit hosting the turbine. Several simulations were carried out considering periodic waves with different periods and amplitudes, getting a deep insight into the energy conversion process from wave to the turbine power output. For this purpose, the three main steps of the overall energy conversion process have been examined. Firstly, from the wave power to the power of the water oscillating flow inside the U-duct. Secondly, from the power of the oscillating water flow to the air pneumatic power. Finally, from the air pneumatic power to the Wells turbine power output. Results show that the U-OWC can capture up to 66% of the incoming wave power, in the case of a wave period close to the eigenperiod of the plant. However, only two-thirds of the captured energy flux is available to the turbine, being partially dissipated due to the losses in the U-duct and the air chamber. Finally, the overall time-average turbine power output is evaluated showing that it is strongly influenced by a suitable choice of the turbine characteristics (mainly geometry and rotational speed).

3 March 2023 in Water
Verified
Journal Article
Open access
PDF file
Calogero PiconeCalogero Picone
Calogero Picone
Marco SinagraMarco Sinagra
Marco Sinagra
LGLuana Gurnari
Luana Gurnari
Tullio TucciarelliTullio Tucciarelli
Tullio Tucciarelli
PFPasquale G. F. Filianoti
Pasquale G. F. Filianoti
In the last few decades, hydropower production has been moving toward a new paradigm of low and diffused power density production of energy with small and mini-hydro plants, which usually do not require significant water storage. In the case of nominal power lower than 20 kW and ultra-low head H (H < 5 m), Archimedes screw or Kaplan type turbines are usually chosen due to their efficiency, which is higher than 0.85. A new cross-flow type turbine called Ultra-low Power Recovery System (UL-PRS) is proposed and its geometry and design criteria are validated in a wide range of operating conditions through 2D numerical analysis computed using the ANSYS Fluent solver. The new proposed solution is much simpler than the previously mentioned competitors; its outlet flow has a horizontal direction and attains similar efficiency. The costs of the UL-PRS turbine are compared with the costs of one Kaplan and one cross-flow turbine (CFT) in the case study of the main water treatment plant of the city of Palermo in Italy. In this case, the UL-PRS efficiency is estimated using a URANS 3D numerical analysis computed with the CFX solver.

27 January 2021 in Water
Verified
Journal Article
Open access
PDF file
Francesco AristodemoFrancesco Aristodemo
Francesco Aristodemo
Giuseppe TripepiGiuseppe Tripepi
Giuseppe Tripepi
LGLuana Gurnari
Luana Gurnari
PFPasquale G. F. Filianoti
Pasquale G. F. Filianoti
We present an analysis related to the evaluation of Morison and transverse force coefficients in the case of a submerged square barrier subject to the action of solitary waves. To this purpose, two-dimensional experimental research was undertaken in the wave flume of the University of Calabria, in which a rigid square barrier was provided by a discrete battery of pressure sensors to determine the horizontal and vertical hydrodynamic forces. A total set of 18 laboratory tests was carried out by varying the motion law of a piston-type paddle. Owing to the low Keulegan–Carpenter numbers of the tests, the force regime of the physical tests was defined by the dominance of the inertia loads in the horizontal direction and of the lift loads in the vertical one. Through the use of the time series of wave forces and the undisturbed kinematics, drag, horizontal inertia, lift, and vertical inertia coefficients in the Morison and transverse semi-empirical schemes were calculated using time-domain approaches, adopting the WLS1 method for the minimization of the difference between the maximum forces and the linked phase shifts by comparing laboratory and calculated wave loads. Practical equations to calculate these coefficients as a function of the wave non-linearity were introduced. The obtained results highlighted the prevalence of the horizontal forces in comparison with the vertical ones which, however, prove to be fundamental for stability purposes of the barrier. An overall good agreement between the experimental forces and those calculated by the calibrated semi-empirical schemes was found, particularly for the positive horizontal and vertical loads. The analysis of the hydrodynamic coefficients showed a decreasing trend for the drag, horizontal inertia, and lift coefficients as a function of the wave non-linearity, while the vertical inertia coefficient underlined an initial increasing trend and a successive slight decreasing trend.

27 March 2020 in Energies
Verified
Journal Article
Open access
PDF file
PFPasquale G. F. Filianoti
Pasquale G. F. Filianoti
LGLuana Gurnari
Luana Gurnari
The U-OWC is a caisson breakwater embodying a device for wave energy absorption. Under the wave action, the pressure acting on the upper opening of the vertical duct fluctuates, producing a water discharge alternatively entering/exiting the plant through the U-duct, formed by the duct and the chamber. The interaction between incoming waves and the water discharge alters the wave pressure distribution along the wave-beaten wall of this breakwater compared with the pressure distributions on a vertical pure reflecting wall. As a consequence, the horizontal wave forces produced on the breakwater are also different. A small scale U-OWC breakwater was put off the eastern coast of the Strait of Messina (Southern Italy) to measure the horizontal wave force. Experimental results were compared with Boccotti’s and Goda’s wave pressure formulas, carried out for conventional upright breakwaters, to check their applicability on the U-OWC breakwaters. Both models are suitable for design of U-OWC breakwaters even if they tend to overestimate by up to 25% the actual horizontal loads on the breakwater. Indeed, the greater the absorption of the energy is, the lower the wave pressure on the breakwater wall is.