In hydropower, the exploitation of small power sources requires the use of small turbines that combine efficiency and economy. Banki-Michell turbines represent a possible choice for their simplicity and for their good efficiency under variable load conditions. Several experimental and numerical tests have already been designed for examining the best geometry and optimal design of cross-flow type machines, but a theoretical framework for a sequential design of the turbine parameters, taking full advantage of recently expanded computational capabilities, is still missing. To this aim, after a review of the available criteria for Banki-Michell parameter design, a novel two-step procedure is described. In the first step, the initial and final blade angles, the outer impeller diameter and the shape of the nozzle are selected using a simple hydrodynamic analysis, based on a very strong simplification of reality. In the second step, the inner diameter, as well as the number of blades and their shape, are selected by testing single options using computational fluid dynamics (CFD) simulations, starting from the suggested literature values. Good efficiency is attained not only for the design discharge, but also for a large range of variability around the design value.

Estimation of water loss at small leaks and openings in different areas of a pipe network is handled by means of an iterative two-step procedure. The first step is estimation of the parameters in the network simulation model. It is achieved with the maximization of a likelihood function, equal to the sum of the squares of the difference between the observed water heads and flow rates and their computed values in a given number of nodes and pipes. The estimated parameters include the loss factors and the loss exponent. They provide the water loss per unit time in each area of the network, called zone. The second step is optimization of the openings of the valves included in the network. It is constrained by the minimum pressure head allowed in the nodes. Closure of the valves enhances the different response of the network with respect to the water loss and the load in each node. The robustness of the procedure is tested with numerical experiments by relaxing most of the assumptions made in the model. The w...

The potential energy hidden in water resources is becoming more and more a significant economic value. The value of the hydroelectric energy is often magnified by the proximity of the turbine to pumps or other energy sinks owned by the same water manager. Cross-flow or Banki-Michel turbines are a very efficient and economic choice that allows a very good cost/benefit ratio for energy production located at the end of conduits carrying water from a water source to a tank. In the paper the optimum design of a cross-flow turbine is sought after, assuming a flow rate variable in time.Regulation of the discharge entering in the turbine is a key issue, which is faced adopting a shaped semicircular segment, moved inside the main case around the rotating impeller. The maximum efficiency of the turbine is attained by setting the velocity of the particles entering the impeller at about twice the velocity of the rotating system at the impeller inlet. If energy losses along the pipe are negligible, closing and opening the inlet surface with the semicircular segment allows always a constant hydraulic head and a constant velocity at the impeller inlet, even with different flow rate entering values. Observed reduction of the turbine efficiency along with the inlet surface reduction is first investigated; a design methodology, using also CFD simulations, is then proposed; finally, the same methodology is applied to a real site in Sicily, selected in the context of the HYDROENERGY P.O. - F.E.S.R. European project

A hyperbolic model for the simulation of flood wave propagation on initially dry land is presented. The convective inertia terms are neglected in the momentum equations. This assumption allows the use of a finite element scheme with linear shape functions for the free surface elevations and constant unit discharges inside each element. An appropriate use of the explicit and implicit approximation of the spatial derivatives is able to avoid the introduction of internal boundaries in the case of vertical discontinuities of the terrain elevation. This is obtained without losing the desirable features of the system matrix or limiting the maximum Courant number. The efficiency and the reliability of the proposed method are investigated for a flood in the south of Sicily, Italy, where a detailed description of the ground morphology has been proved to be essential for obtaining a good match between measured and computed maximum water depths.

A numerical and experimental study was carried out for validation of a previously proposed design criterion for a cross-flow turbine and a new semi-empirical formula linking inlet velocity to inlet pressure. An experimental test stand was designed to conduct a series of experiments and to measure the efficiency of the turbine designed based on the proposed criterion. The experimental efficiency was compared to that from numerical simulations performed using a RANS model with a shear stress transport (SST) turbulence closure. The proposed semi-empirical velocity formula was also validated against the numerical solutions for cross-flow turbines with different geometries and boundary conditions. The results confirmed the previous hydrodynamic analysis and thus can be employed in the design of the cross-flow turbines as well as for reducing the number of simulations needed to optimize the turbine geometry.