Hydrogen production is essential in the transition to sustainable energy. This study examines two hydrogen production routes, steam methane reforming (SMR) and chemical looping reforming (CLR), both using raw natural gas as feedstock. SMR, the most commonly used industrial process, involves reacting methane with steam to produce hydrogen, carbon monoxide, and carbon dioxide. In contrast, CLR uses a metal oxide as an oxygen carrier to facilitate hydrogen production without generating additional carbon dioxide. Simulations conducted using Aspen HYSYS analyzed each method’s performance and energy consumption. The results show that SMR achieved 99.98% hydrogen purity, whereas CLR produced 99.97% purity. An energy analysis revealed that CLR requires 31% less energy than SMR, likely due to the absence of low- and high-temperature water–gas shift units. Overall, the findings suggest that CLR offers substantial advantages over SMR, including lower energy consumption and the production of cleaner hydrogen, free from carbon dioxide generated during the water–gas shift process.

The desire to develop gas turbines (GTs) that can utilise natural gas (NG) blended with hydrogen (H2) often encounters operability challenges related to combustion-induced vortex breakdown (CIVB) flashback issues. Hence, a detailed Large Eddy Simulation (LES) was employed in this study to examine the impact of H2-NG co-firing on central recirculation zones (CRZs), combustion properties, and the risk of CIVB flashback in a pilot-scale swirl burner facility. The LES model successfully replicated the swirling component of the flame observed in the experiment with reasonable accuracy. The findings revealed that the introduction of H2 into the burner increased the velocity and temperature of the burned gases. The higher reactivity of H2 resulted in faster burning rates and a shift in the reaction zone, indicating that NG-H2 firing burns more rapidly than pure NG firing. Additionally, H2 was found to enhance the velocity gradient, pushing the CRZ upstream. Changes in the location of the CRZ can disrupt density and velocity gradients, affecting the generation of vorticity by the baroclinic torque and potentially increasing negative axial velocity, thereby increasing the risk of CIVB flashback. Further research is necessary to comprehensively assess the CIVB flashback risk, particularly when the proportion of H2 exceeds 30 %.

With the rising popularity of the oil palm industry driven by global demand, an abundance of oil palm biomass waste is expected. Wet torrefaction is an appealin

Pertanika Journal information and guidelines

A large number of dairy industries in Malaysia have disposed extensive quantity of waste, resulting in pollutions. This waste could be the potential feedst A large number of dairy industries in Malaysia have disposed extensive quantity of waste, resulting in pollutions. This waste could be the potential feedst