In this work, different methods for fly ash modification were applied to obtain an adsorbent for the efficient removal of selected pharmaceuticals from a multiclass aqueous solution. Morphological and surface properties of the modified fly ash samples were analyzed by scanning electron microscopy, X-ray fluorescence, X-ray diffraction, Fourier transform infrared spectroscopy, and point of zero charge, and the influence of the applied modifications was determined by comparison with the results obtained for unmodified fly ash. Experimental parameters of the adsorption of the pharmaceutical onto the modified fly ash were optimized, and special attention was paid to the influence of different parameters on the adsorption capacities. Multivariate methods of analysis, such as artificial neural networks, applied to the obtained results showed that the contact time, the initial concentration of the pharmaceutical solution, and the pH value had the strongest influence on the adsorption process. Fly ash modified with chitosan and magnetic iron oxide showed the best adsorption properties (removal efficiency above 80% for the majority of the selected pharmaceuticals), and artificial neural networks confirmed its susceptibility to the modeling process.

The main goal of this study is to address the problem of environmental water pollution caused by organic dyes through waste valorization by synthesizing geopolymer-based adsorbents. In this work, geopolymers were synthesized using fly ash modified with chitosan and polyvinyl alcohol as a starting material. The obtained materials were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and determination of the point of zero charge. We examined the adsorption potential for organic dye (methylene blue, brilliant green, crystal violet) removal through the influence of contact time, initial pH and concentration of adsorbate solution, and temperature on adsorption. The obtained results were analyzed using theoretical kinetics and isotherm models. Interpretation of the obtained results was performed using the Box–Behnken design and chemometric methods of multivariate analysis. The findings showed that modification with chitosan significantly enhanced the adsorption efficiency of the synthesized materials up to 95.9% for methylene blue adsorption. The parameters identified as having the greatest influence on the adsorption process were contact time, pH-value, initial dye concentration, and the type of dye being adsorbed.

The burning of coal in thermal power plants throughout Serbia produces significant amounts of industrial waste, primarily in the form of fly ash, boiler ash, and slag. Given their annual production, availability, and fine grain structure, it is necessary that sustainable strategies are developed for their reuse, instead of depositing them directly in landfills. In this research, the possibility of using fly ash, slag, and diatomaceous earth as raw materials for the synthesis of geopolymers at low temperatures was examined, in order to replace cement in construction materials, with the aim of reducing carbon dioxide emissions. Special emphasis was put on the effect of addition of organic macromolecules—polyvinyl alcohol (PVA), chitosan, and starch—upon the structure and mechanical properties of the obtained materials. In addition, the behavior of the materials with regard to the leaching of heavy metals in different environmental conditions was examined. Chemometric methods of multivariate analysis were used to examine the correlations between the obtained physical–chemical parameters, while the dependence of mechanical properties on the composition of the raw mixture was analyzed using the Mixture Design of Experiments method. The results obtained indicate that the examined waste materials have potential to be used as an environmentally friendly alternative to cement. The addition of PVA and chitosan had a positive effect on the mechanical properties of the geopolymers, with the highest strength achieved in formulations based solely on fly ash, containing 2.5% PVA, which reached 12.6 MPa. It was also shown that the addition of 30% diatomaceous earth increases the density and compressive strength of the material, while reducing the number of microcracks present in its structure, with a compressive strength of 13 MPa.