Xizhi WANG

Dr. Xizhi WANG

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YZYongjian Zhu
Yongjian Zhu
PWPing Wang
Ping Wang
PWPing Wang
Ping Wang
CMChengcheng Mei
Chengcheng Mei
HRHeng Ren
Heng Ren
XWXizhi WANG
Xizhi WANG
The mining of deep coal resources occurs in a high-stress geological environment as well as an engineering environment of rock excavation and unloading. Research on the re-bearing capacity characteristics and damage mechanism of rock masses damaged by peak front unloading is critical in revealing the destabilization and rupture law of deep rock bodies. The triaxial pre-peak unloading point was controlled to prepare damaged sandstone specimens, and the RMT-150C rock mechanics test loading system and the AEwin USB-type acoustic emission monitor were used to perform uniaxial reloading tests on the pre-peak unloading-damaged sandstone and to monitor the acoustic emission signals during the rupture process. Among them, the peak front unloading point was set to 40%, 45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, and 90% of the peak strength at 10 MPa of the surrounding pressure for a total of 11 working conditions. The test results show that: (1) The degree of unloading before the peak controls the uniaxial reload deformation characteristics of sandstone. The higher the unloading point, the faster the deformation of the rock sample, even directly into the crack instability extension stage, and the sandstone deformation characteristics transform from plastic—elastic to elastic—viscous. (2) The cumulative energy characteristics of the 40% to 60% sandstone at the unloading point are comparable to those of the complete sandstone and are separated into smooth, steady growth, and secondary smooth phases. The acoustic emission energy characteristics of the 65% and 70% sandstone at the unloading point are mostly focused on during the crack expansion stage. The sandstone’s acoustic emission energy characteristics exhibit a “double peak” occurrence at 75% of the unloading point. The cumulative energy characteristics of the 80% to 90% sandstone at the unloading point reveal a “stepped” rise. (3) Sandstone’s pre-peak unloading rupture morphology influences the reload damage characteristics: 40% to 70% of the specimens at the unloading point exhibit “Y”-type double-slope shear damage features. The predominant cause of specimen damage in 75% of the specimens at the unloading point is secondary primary cracks based on the pre-peak tensile rupture pattern. The damage path of 80% to 90% of the specimens at the point of unloading occurs in shear damage along the pre-peak unloading rupture pattern. (4) A closed crack mechanics analysis model under uniaxial reload was established, and the basic solution of pseudo-force for fine microcracks subjected to far-field stress, the stress intensity factor at the crack tip, and the crack fracture angle were theoretically derived. Furthermore, the relationship between the fracture angle θ of rock compression-shear cracks, the crack angle β, and the friction coefficient f at the crack surface was clarified.

4 September 2025 in Results in Engineering
Verified
Journal Article
Open access
XWXizhi WANG
Xizhi WANG
YZYongjian Zhu
Yongjian Zhu
PWPing Wang
Ping Wang
YLYafei Luo
Yafei Luo
MWMingxing Wei
Mingxing Wei
YWYixin Wu
Yixin Wu

23 January 2024 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
XWXizhi WANG
Xizhi WANG
YZYongjian Zhu
Yongjian Zhu
PWPing Wang
Ping Wang
HRHeng Ren
Heng Ren
PLPeng Li
Peng Li
JLJianhua Lv
Jianhua Lv
When cutting roof and pressure relief, the impact of blasting is especially obvious on the integrity of the roof of a large‐section soft‐rock roadway. The reasonable parameters of blasting roof cutting were studied through using Xiaohezui coal mine ‐12110 roadway as the engineering background. The LS‐Dyna simulation results show that: Interval blasting is beneficial to the expansion of interhole cracks and the damage to the perimeter of the hole is smaller than that of adjacent blasting, the lower the charge uncoupling factor, the larger the perimeter of the hole fragmentation zone. The mechanical model of the large‐section soft‐rock roadway after retrieval was established, the support resistance equation of the roadway side support and the gangue in the extraction area was derived, and the minimum support force required for the roadway side support was solved. According to the site situation, the roadway support scheme for different areas was proposed, and after continuous delamination monitoring of the roof plate, it was found that the amount of roof‐plate delamination was finally stabilized within 180 mm after the working face was advanced, and the effect of leaving the roadway was good.

29 October 2024 in Processes
Verified
Journal Article
Open access
PDF file
WLWenbin Li
Wenbin Li
YZYongjian Zhu
Yongjian Zhu
YLYafei Luo
Yafei Luo
MWMingxing Wei
Mingxing Wei
XWXizhi WANG
Xizhi WANG
The natural fracture network within the coal body serves as the main pathway for gas migration, with its geometric characteristics significantly impacting coalbed methane flow. In order to enhance the numerical model for simulating coalbed methane flow based on fracture network images, we define porosity and permeability functions for these images and improve upon existing methods. By employing a pixel probability decomposition algorithm, we establish a geometric model of a rough discrete fracture network, which is imported into COMSOL Multiphysics to build a numerical model of gas flow. We analyze the impact of different fracture structures on coal seam permeability and find that gas primarily flows through interconnected fractures at much higher velocities compared to matrix pores. Furthermore, we observe that fracture network permeability increases with increasing porosity (0.0635–0.164), fractal dimension (1.571–1.755), maximum fracture branch length (0.0111–0.0249 m), and connectivity (0.808–2.789). Conversely, it decreases with an increasing fracture dip angle (1.61–88.39°) and tortuosity fractal dimension (1.0018–1.0195). Our simulation method based on fracture network imaging provides a simple yet feasible approach to simulate gas extraction while accurately capturing various stages in the extraction process, including the temporal and spatial evolution of gas velocity and pressure as well as differences between fractures and the coal matrix.

3 February 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
ZZZilong Zeng
Zilong Zeng
WPWang Ping
Wang Ping
YZYongjian Zhu
Yongjian Zhu
ZZZe Zhou
Ze Zhou
XWXizhi WANG
Xizhi WANG
MWMingxing Wei
Mingxing Wei
To address the limited understanding of anchorage mechanisms in extensively fractured surrounding rock, we performed DEM simulations to elucidate the microscale self-organized reconfiguration of a granular rock system under three support conditions: no anchorage, sparse anchorage, and dense anchorage (δ ≈ 0.1 and 0.18). The results show that, in the absence of anchorage, gravity-induced disturbance in conjunction with boundary confinement drives arching, and the displacement field can be partitioned into a loosening zone, an equilibrium zone, a sliding–compression band, and a load-bearing zone. Within the compression band, reorganization of the contact network establishes a horizontal thrust, T, which couples with the vertical load, Q, to sustain the pressure arch. Bolt pretension induces an initial skeletal framework in the vicinity of the plate, and increasing δ strengthens the continuity of strong force chains, leading to earlier closure of the composite arch and the formation of an “arch–band–beam” load-bearing skeleton. Using the ξ–Ω parameters to characterize energy evolution, Ω > 0.5 indicates the onset of reconfiguration; under the present conditions, Ω ≈ 0.7 corresponds to the formation of a through-going composite arch and can be used as an empirical criterion.