An orchard variable-rate sprayer applies the appropriate amount of plant protection products only where they are needed based on detection data from advanced sensors, a system that has attracted increasing attention. The latest developments in the detection unit, variable control unit, and signal-processing algorithm of the variable-rate sprayer are discussed. The detection of target position and volume is realized with an ultrasonic sensor, a laser scanning sensor, or other methods. The technology of real-time acquisition of foliage density, plant diseases and pests and their severity, as well as meteorological parameters needs further improvements. Among the three variable-flow-rate control units, pulse width modulation was the most widely used, followed by pressure-based, and variable concentration, which is preliminarily verified in the laboratory. The variable air supply control unit is tested both in the laboratory and in field experiments. The tree-row-volume model, the leaf-wall-area model, and the continuous application mode are widely used algorithms. Advanced research on a variable-rate sprayer is analyzed and future prospects are pointed out. A laser-based variable-rate intelligent sprayer equipped with pulse width modulation solenoid valves to tune spray outputs in real time based on target structures may have the potential to be successfully adopted by growers on a large scale in the foreseeable future. It will be a future research direction to develop an intelligent multi-sensor-fusion variable-rate sprayer based on target crop characteristics, plant diseases and pests and their severity, as well as meteorological conditions while achieving multi-variable control.

Design optimization and test for a pendulum suspension of the crop sprayer boom in dynamic conditions based on a six DOF motion simulator

The application of robotics has great implications for future food security, sustainable agricultural development, improving resource efficiency, reducing chemical pesticide use, reducing manual labor, and maximizing field output. Aiming at the problems of high labor intensity and labor shortage in the fields of pesticide application, weeding, and field information collection, a multifunctional and electric field management robot platform is designed, which has four switching steering modes (Ackermann steering, four-wheel steering, crab steering, and zero-radius steering), and its wheel-track can be automatically adjusted. Commonly used spraying booms, weeders, crop information collectors, and other devices can be easily installed on the robot platform. A multi-sensor integrated navigation system including a satellite positioning system, an RGB camera, and a multi-line lidar is designed to realize the unmanned driving of the robot platform in a complex field environment. Field tests have shown that the robot can follow the set route, and tests under simulated conditions have indicated that it can also dynamically correct paths based on crop rows by using a visual system. Results from multiple trials showed that the trajectory tracking accuracy meets the requirements of various field management operations.

Air-assisted boom sprayer is proven to be one of the best pesticide application methods to achieve uniform deposition of droplets in the canopy and improve the effective utilization of pesticides. However, the air flow velocity, air flow volume and air flow direction of the orchard sprayer should match the characteristic parameters of the target canopy, equipment spraying parameters and meteorological conditions so as to improve the spraying quality and reduce environmental pollution. This paper elaborates on the research status of air-assisted field sprayers and orchard sprayers, summarizes the research methods of air-assisted sprayers in four aspects, including experimental verification, theoretical analysis, simulation and structural optimization, and clarifies the advantages and disadvantages of these methods. It also presents two future research and development trends, including the intelligent, precise dynamic regulation of air flow velocity, air flow volume and air flow direction and the instant feedback of spraying quality, hoping to provide a reference for the research of air-assisted spray technology and equipment.

As a new type of crop protection machinery, the Crop Protection Unmanned Aerial System (CPUAS) has developed rapidly and been widely used in China; currently, how to use the CPUAS scientifically has become a top priority. However, the relationships between the operating parameters of the CPUAS and the effective spraying width (ESW), droplet distribution characteristics, and control effects of insect pests and diseases are not clear yet. Therefore, three levels of flight speed (FS) as 3, 4, and 5 m/s, three levels of flight height (FH) as 1.5, 2.0, and 2.5 m, and spraying volume 2.0 L/min experiments were carried out to investigate the effects of FS and FH on the ESW, droplet deposition uniformity (DDU), and droplet penetration rate (DPR) by using an electric single-rotor CPUAS CE20. Based on the obtained results, combined with the insect pests and diseases occurrence agronomic laws, the optimal operation parameters of the CPUAS were selected to control the wheat aphids, powdery mildew, and head blight. The results showed that the ESW of CE20 was not consistent, the maximum value was 5.78 m, and the minimum one was 2.51 m. The FS had a highly significant impact on ESW (p = 0.0033 < 0.01), while the FH and the interaction between FS and FH had no significant impact on ESW. The coefficients of variation (CV) of the droplet deposition were between 23.3% and 34.4%, which meant good deposition uniformity. The FH (p = 0.0019) and the interaction between FS and FH (p = 0.02) had significant impacts on the DDU. The control effects on aphids were 78.71% (1 day), 84.88% (3 days), and 90.42% (7 days), the control effects on powdery mildew were 77.17% (7 days) and 82.83% (14 days), and the control effect on head blight was 88.32% (20 days). This study proved that by the optimization of parameters and the combination of agronomy, good control effects for insect pests and diseases could be achieved by the CPUAS. The research results would provide some technical supports for CPUAS application.

Pollination success is essential for hybrid oilseed rape (OSR, Brassica napus) seed production, but traditional pollination methods are not efficient. The unmanned agricultural aerial system (UAAS) has developed rapidly and has been widely used in China. When flying, the wind field generated by the rotors overcomes the UAAS gravity, and it blows and disturbs the crops below, which helps the pollen spread. In order to investigate the distribution law of the three-dimensional (direction x, y, z) airflow field, experiments involving three levels of flight speed (FS) at 4.0, 5.0, and 6.0 m/s, and three levels of flight height (FH) at 1.5, 2.0, and 2.5 m were conducted in the OSR field by using an electric four-rotor UAAS P20. The effects of FS and FH on airflow velocities ($v_x$, $v_y$, $v_z$) were analyzed. High-speed dynamic camera (HSDC) technology was used to capture the swings of OSR plants under airflow field disturbance. OSR pollen samples were collected during the experiments. The results showed that the airflow field in the direction x was mainly concentrated on the center of the flight path (S3), and the maximum wind velocity of direction x was 8.01 m/s (T1, S3). The direction x airflow field width was distributed almost symmetrically, but the center position shifted easily, due to crosswind. The airflow field in the direction y was distributed on both sides of the center flight path, and the velocity was generally larger, with the maximum at 7.91 m/s (T1, S2). The airflow field in the direction z was distributed irregularly, and the velocity was small. The FH had highly significant impacts on $v_x$ (p < 0.01), and the interaction of FS and FH had significant impacts on $v_x$ (0.01 < p < 0.05), while the FS had no significant impact on $v_x$ (p = 0.70804 > 0.05). The FS, FH, and interaction of FS and FH all had highly significant impacts on $v_y$ (p < 0.01). The swings of the OSR plant captured by the HSDC proved that the UAAS airflow field could effectively blow the OSR plant. The swing amplitude changes showed a positive correlation with airflow velocities ($v_x$) in general. Although the observed OSR plant swung forward and backward repeatedly, there was a law of first forward, and then backward, and forward again at the beginning of each swing. The pollen collected on the sampler verified that the UAAS airflow field could help with pollen spread. The research results provide technical support for UAAS application on supplementary pollination for hybrid OSR seed production.