Photovoltaic (PV) systems are becoming increasingly popular, especially in residential buildings. However, the high penetration of prosumer PV micro-installations can have a negative impact on the operation of distribution networks due to the low self-consumption of the energy produced. One way to mitigate this problem is to use a residential energy storage system (RESS) and load shifting under a demand-side management (DSM) scheme. Energy management systems (EMSs) are used to control the operation of RESSs and to implement DSM. There are two main categories of EMSs: rule-based and optimization-based. Optimization-based EMSs provide better results than rule-based EMSs but can be computationally expensive. This article proposes an optimization-based EMS that is designed specifically for residential buildings. The proposed home energy management system (HEMS) uses a particle swarm optimization method to maximize the prosumer’s financial neutrality, which is calculated based on dynamic energy prices. Simulation-based evaluation using the measurements taken in a building equipped with a PV source, RESS, and shiftable loads shows the improved performance of the proposed HEMS compared to rule-based RESS control. The results show that the designed HEMS increases self-consumption, thus reducing the impact of the prosumer’s PV micro-installations on the distribution grid.
8 February 2026 in Energy Conversion and Management
In this article, a method for short-term forecasting of photovoltaic (PV) generation was proposed. The proposed method belongs to the group of physical methods and is based on numerical weather forecasts. The generation forecast was determined using the PV source model in the OpenDSS software. The results of calculations were compared with the results of measurements from the operating PV micro-installations