In order to improve the performance of the oscillating jet actuator, the optimization design of the actuator is carried out using numerical simulation. The aim of optimization is to improve the uniformity and range of jet sweeping; the evaluation indices of the actuator are proposed; the kriging surrogate models are established to describe the relation between the geometric parameters and evaluation indices, and the effects of the interaction between parameters on the jet are analyzed with the flow fields; the multi-objective genetic algorithm is called to complete the optimization of the actuator. The results show the followings: the interaction between the height and the length of the mixing section have a strong effect on the jet, and both of them determine the slenderness of the mixing section together; the more slender the mixing section, the easier it is for the jet to adhere to the wall of the mixing section, which leads to uneven jet sweeping and small deflection angle of the jet; the effect of the interaction between the second throat, the expansion angle and length of the expansion section on the jet is weak, which affects the degree of deflection of the jet at the second throat, the degree of the jet adhering to the wall of the expansion section and the size of the separation vortex in the expansion section, respectively; the optimized actuator increases the jet sweeping uniformity by 2% and the jet deflection angle by 5°.
In order to improve the separation control effect of an oscillating jet, the external flow field of the actuators and the wing wake are obtained via hot-wire measurements to optimize the actuator and achieve wing separation flow control. The optimization objectives are to improve the sweeping uniformity and range of the jet. In the present study, the PCA method is used for the modal decomposition of the velocity distribution. The modal-based actuator evaluation parameters are proposed, and the kriging surrogate models of the modal coefficients (principal components) on the actuator parameters are established. The multi-objective genetic algorithm was utilized to complete the optimization of the actuator, and the effect of flow separation control on the wing was verified. The results show that three patterns exist in the time-averaged velocity distribution of the external flow field: unimodal, broad and bimodal, from unimodal to bimodal, the degree of the jet sweeping uniformity gradually decreases, and the sweeping range gradually increases. The pattern of the velocity distribution modals affects the degree of jet sweeping uniformity, while the distance of the modal peaks affects the jet sweeping range. The two evaluation parameters are negatively correlated: insufficient sweeping range or poor sweeping uniformity of the jet are not conducive to wing separation flow control, and the two must be coordinated to achieve the optimal control effect.