Lan Ma

Prof. Lan Ma

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2022 in Frontiers in Bioengineering and Biotechnology
Verified
Journal Article
Open access
HZHao Zhang
Hao Zhang
XSXiaolong Shen
Xiaolong Shen
ZFZhikui Fei
Zhikui Fei
XFXingping Fan
Xingping Fan
LMLan Ma
Lan Ma
SHShengtian Huang
Shengtian Huang
Titanium (Ti) and its alloys are the most commonly used materials for bone implants. However, implant failure often happens due to bacterial infection. Developing antibacterial coatings on Ti implants is an effective strategy. Dopamine and tannic acid were cross-linked to form coating on Ti through Michael addition and Schiff base reaction. In addition, the Ag ions were grafted on the coating by the redox reaction of phenolic hydroxyl groups. Thus, an Ag-incorporated polydopamine/tannic acid coating was prepared on Ti substrate. SEM, EDS, water contact angle, FTIR, and XRD results demonstrated that the coating was formed on Ti successfully. The antibacterial activity of the coating against Gram-negative E. coli was examined, and the cytotoxicity of the coating was investigated by mouse fibroblast cells. The improvement of hydrophilicity, good cytocompatibility, and antibacterial effectiveness indicates that the coating has potential to surface modification of Ti implants.

27 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
Rongxun PiaoRongxun Piao
Rongxun Piao
WZWenjin Zhu
Wenjin Zhu
LMLan Ma
Lan Ma
PZPeng Zhao
Peng Zhao
BHBiao Hu
Biao Hu
TiH2-basd powder metallurgy (PM) is one of the effective ways to prepared high temperature titanium alloy. To study the thermomechanical behavior of near-α titanium alloy and proper design of hot forming, isothermal compression test of TiH2-based PM near-α type Ti-5.05Al-3.69Zr-1.96Sn-0.32Mo-0.29Si (Ti-1100) alloy was performed at temperatures of 1123–1323 K, strain rates of 0.01-1 s−1, and maximum deformation degree of 60%. The hot deformation characteristics of alloy were analyzed by strain hardening exponent (n), strain rate sensitivity (m), and processing map, along with microstructure observation. The flow stress revealed that the difference in softening/hardening behavior at temperature of 1273–1323 K and the strain rate of 1 s−1 compared to the lower deformation temperature and strain rate. The strain hardening exponents at temperatures of 1123 K are all negative under all strain rates, and the most severe flow softening with minimum value of n was observed at 1123 K and 1 s−1. The strain rate sensitives showed that the peak region with m value greater than 0.5 generally appeared in the high temperature range of 1273–1323 K, while strain rate sensitivity at low temperature behaved differently with strain rates. The processing map developed for strain of 0.6 exhibited high power dissipation efficiency at high temperatures of 1273–1323 K and a low strain rate of 0.01 s−1, due to microstructure evolution of β phase. The decrease of strain rate at 1323 K resulted in the formation of globularization of α lamellae. The instability domain of flow behavior was identified in the temperature range of 1123–1173 K and at the strain rate higher than 0.01 s−1 reflecting the localized plastic flow and adiabatic shear banding, and inhomogenous microstructure. The variation of power dissipation energy (η) slope with strain demonstrated that the power dissipation mechanism during hot deformation has been changed from temperature-dependent to microstructure-dependent with the increase of temperature for the alloy deformed at 0.1 s−1. Eventually, the optimum processing range to deform the material is at 1273–1323 K and a strain rate range of 0.01–0.165 s−1 (lnε˙ = −4.6–−1.8).

12 January 2026 in Surface Science and Technology
Verified
Journal Article
Open access
PDF file
Qingdong ZhongQingdong Zhong
Qingdong Zhong
SZShujian Zhang
Shujian Zhang
DWDan Wang
Dan Wang
XWXuemei Wang
Xuemei Wang
BXBin Xie
Bin Xie
YYYucheng Yu
Yucheng Yu
FeCo alloys are highly regarded for their excellent soft magnetic properties, yet their susceptibility to corrosion in chloride-rich environments hinders their widespread application. To overcome this limitation, we have developed a novel composite coating on the FeCo alloy surface by synergistically modifying a phytic acid conversion coating (PACC) with tannic acid (TA) and cerium salts. This was achieved using a simple, ethanol-assisted layer-by-layer self-assembly method. Its structure and performance were systematically evaluated using multiscale characterization techniques and electrochemical testing. Our results demonstrate that this synergistic modification effectively repairs the intrinsic porosity of the PACC, yielding a denser and more uniform film. The corrosion resistance of the modified composite layer significantly surpasses that of both the bare alloy and the single-layer PACC, with the PACC-Ce-5TA sample exhibiting the best protective performance. At the initial corrosion stage, its polarization resistance increases by two orders of magnitude compared with the substrate, achieving a protection efficiency of up to 98.72%. More importantly, dynamic electrochemical impedance spectroscopy (EIS) and wire beam electrode (WBE) visualization indicate that the composite layer exhibits remarkable self-healing behavior. The superior protection is attributed to a multi-faceted mechanism: a robust physical barrier formed by a sacrificial outer TA layer and a densified inner PACC layer, supplemented by the cathodic inhibition of Ce3+ ions and an active self-healing function, where TA molecules chelate with metal ions at defect sites. This study provides a green and effective strategy for durable corrosion protection of FeCo alloys and related metallic materials.

23 December 2024 in Metallurgical Research & Technology
Verified
Journal Article
Closed access
PDF file
JLJunhan Li
Junhan Li
SYShaoli Yang
Shaoli Yang
KZKuisong Zhu
Kuisong Zhu
LMLan Ma
Lan Ma
CLChanggeng Liu
Changgeng Liu
XCXiangli Cheng
Xiangli Cheng
Vanadium extraction from vanadium (V) slag generates wastewater containing a large number of pentavalent vanadium [V (V)] and hexavalent chromium [Cr (VI)], posing environmental and health risks if discharged untreated. This study investigated the use of Fe2SO4 · 7H2O-modified diatomite as an adsorbent for removing V (V) and Cr (VI) from vanadium extraction wastewater (VEW). Static adsorption experiments were conducted to assess the adsorption capacity and removal efficiency of modified diatomite under varying conditions of adsorbent dosage, pH, and contact time. The results indicated removal rates of 97.4% for V (V) and 65.8% for Cr (VI) at pH 5, using 3 g of adsorbent dosage over 1440 min. In comparison with unmodified diatomite, the modified version exhibited a 667% increase in V (V) removal and a 531% increase in Cr (VI) removal, indicating significant enhancement in adsorption capacity post-modification. Adsorption capacity decreased with increasing dosage of modified diatomite. Moreover, the adsorbent under acidic conditions demonstrated superior adsorption effectiveness over neutral and alkaline conditions. Furthermore, the kinetics model revealed that adsorption followed Pseudo-second-order and Elovich kinetics, indicating chemisorption and complexation with active functional groups as dominant mechanisms. This study elucidated the effectiveness mechanisms of diatomite modification, paving the way for enhanced V (V) and Cr (VI) removal technologies in industrial wastewater treatment.

23 March 2026 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
XWXue-Mei Wang
Xue-Mei Wang
Qingdong ZhongQingdong Zhong
Qingdong Zhong
LMLan Ma
Lan Ma
YYYu-Cheng Yu
Yu-Cheng Yu
Qingdong ZhongQingdong Zhong
Qingdong Zhong
BXBin Xie
Bin Xie
The corrosion behavior of copper-nickel alloy/carbon steel couple, subjected to a sulfide-containing simulated seawater environment beneath an artificially defective epoxy coating, was systematically investigated using a combination of wire beam electrode (WBE), electrochemical impedance spectroscopy, and microscopic characterization techniques. The results indicate that the anodic reaction at the artificial defect during the early stages of immersion is the most intense. A broad spectrum of cathodic currents is observed at the coating/metal interface. As immersion time progresses, the artificial defects are progressively protected by the corrosion product iron sulfide, resulting in a gradual attenuation of the anodic reaction. A significant disparity in the degree of cathodic delamination exists between coupled copper-nickel alloy and carbon steel beneath the epoxy coating. It can be attributed to their different electrochemical activities and the specific location of the artificial defect on the WBE. Throughout the immersion process, the copper-nickel alloy is less eroded. This phenomenon can be attributed to the protective effect of copper oxide and basic copper chloride films and the microgalvanic effect. In the region of carbon steel, multiple anodes are positioned at the immersed end. In addition, the reasons why individual carbon steel electrodes exhibit polarity reversal vary at different immersion stage.

10 March 2026 in Metallurgical Research & Technology
Verified
Journal Article
Closed access
PDF file
JXJian Xiao
Jian Xiao
LMLan Ma
Lan Ma
SYShaoli Yang
Shaoli Yang
GCGuangrun Chen
Guangrun Chen
YZYang Zhang
Yang Zhang
KZKuisong Zhu
Kuisong Zhu
This study optimizes the solution-aging treatment of Ti–6Al–4V alloy bars fabricated by spark plasma sintering (SPS) and hot extrusion, aiming to address microstructural heterogeneity and high flow stress during thermomechanical processing. Hot-compression tests at 900 °C (strain rate: 0.001 s −1 ) were conducted following solution treatment (950 °C–990 °C/2 h/air cooling) and aging (520 °C/2–4 h/air cooling), characterizing microstructural evolution and flow-stress behavior. The results indicate that increasing the solution temperature enhances grain refinement and homogenization, whereas excessive temperature (990 °C) leads to grain growth and α-cluster formation. Prolonged aging at 980 °C initially coarsens the grains but achieves homogeneity after 3.5 h, forming fine lamellar α and β-transformed structures. Coarse heterogeneous microstructures elevate peak flow stress and promote Al-rich segregation defects. The optimized parameters (980 °C/2 h + 520 °C/3.5 h) effectively homogenize the SPS-processed Ti–6Al–4V microstructure and suppress hot-compression defects, providing a viable approach for aerospace component manufacturing.