Unconfined compressive strength (UCS) is an important rock parameter required in the engineering design of structures built on top or within the interior of rock formations. In a site investigation project, UCS is typically obtained discretely (through point-to-point measurement) and interpolated. This method is less than optimal to resolve meter-scale UCS variations of heterogenous rock such as carbonate formations in which property changes occur within data spacing. We investigate the geotechnical application of multiattribute analysis based on near-surface reflection seismic data to probe rock formations for their strength attributes at meter-scale variability. Two Late Jurassic outcrops located in central Saudi Arabia serve as testing sites: the Hanifa Formation in Wadi Birk and the Jubaila Formation in Wadi Laban. The study uses core and 2D seismic profiles acquired in both sites, from which we constrain UCS, acoustic velocity, density, and gamma-ray values. A positive linear correlation between UCS and acoustic impedance along the core indicates that seismic attributes can be utilized as a method to laterally extrapolate the UCS away from the core location. Seismic colored inversion serves as input for neural network multiattribute analysis and is validated with a blind test. Results from data at both outcrop sites indicate a high degree of consistency with an absolute UCS error of approximately 5%. We also demonstrate the applicability of predicted UCS profiles to interpret mechanical stratigraphy and map lateral UCS heterogeneities. These findings provide a less expensive alternative to constrain UCS from limited core data on a field-scale site engineering project.
Complex scattering in the near surface can introduce significant distortions in deep reflection data. To model and explain these effects, a multiplicative random noise model based on the speckle mechanism of small-scale scattering has been proposed. While this model effectively captures the observed phenomena in field data, it has been considered rather abstract as it relies on random mathematical clutter to replicate the distortions. This study goes beyond by delving into the analysis of the actual meter-scale geologic heterogeneity found in carbonate formations from desert environments. By employing elastic wave propagation simulations, we show that geologic heterogeneity is equally capable of generating the observed speckle noise in field data when compared to idealized mathematical clutter. Our simulations reveal that the phase perturbations exhibit a quasi-random nature and follow a symmetric near-normal distribution, thereby supporting the validity of the multiplicative noise model and aligning with field observations. Furthermore, we discover that the spread or standard deviation of phase perturbations increases with frequency. This finding provides a plausible explanation for the loss of higher frequencies commonly seen in our data. By considering the complex waveform distortions induced by near-surface heterogeneity, our new noise model represents a significant advancement over residual statics that only account for the kinematic aspect. In summary, our study shows that geologic heterogeneity can easily generate the speckle noise observed in field data. The complex waveform distortions can be captured using quasi-random phase perturbations, as the multiplicative noise model outlines. This advancement leads to a more comprehensive understanding of the influence of near-surface heterogeneity on seismic data. Consequently, this understanding serves as a foundation for despeckling deep reflection data and enhancing the resolution of seismic imaging. These findings have significant implications for improving the quality and accuracy of seismic imaging in areas where speckle noise dominates.
An accurate data acquisition plan is critical for near-surface geoscience investigations. Detailed understanding of the terrain and land cover of the survey area is essential to designing a data acquisition layout that efficiently meets the objective while mapping potential obstacles. Using satellite-based data is the most affordable and straightforward method to obtain this information. However, near-surface geoscience investigations demand a higher-resolution map than commonly available satellite imagery to design a detailed acquisition plan. This paper presents a concept that utilizes unmanned aerial vehicles (UAVs) to successfully and sustainably perform on-demand high-resolution areal scouting to aid near-surface geoscience data acquisition campaigns and seismic drone deployment. We share the results of two field trial cases where the presented concept was evaluated. Case A is a 16 km2 extensive outcrop investigation in an arid desert environment. The initial satellite-based acquisition plan was changed considerably when UAV data sets became available. This led to an approximately 60% improvement in data productivity and efficiency, effectively reducing the carbon footprint of conventional scouting operations. Case B utilizes high-resolution areal scouting to determine the safe landing zone for autonomous seismic drone swarms to further support sustainable geophysical data acquisition. The UAV data enable seismic drone swarms to land optimally on preprogrammed landing points while navigating subsatellite-resolution obstacles. These two successful cases suggest that analogous productivity and efficiency improvements may be achieved in industrial-scale land seismic data acquisition planning that utilizes the UAV data set.