Part 2 of the study furthers the research and aims to present evidences from an experimental investigation. The work presents the experimental research with a rig for examining the effect of journal out-of-roundness on the dynamic performance of a symmetric hydrodynamic journal bearing system. Four shafts with different magnitudes of journal out-of-roundness were fabricated for the experiment. The test rig was equipped with a date logging system to collect and process all signals provided by the displacement probes and the thermocouples. The onset speed of oil film instability was determined by analysing the spectrums of the journal vibrations. The experiments show a notable double-synchronous frequency vibration component incurred by the journal out-of-roundness, which makes the system behave as oil whirling but the mechanism is different. The results also coincide with the theoretical calculations presented in Part 1 of the study, which validates that the journal out-of-roundness may increase the overall system stability when the dimensionless out-of-roundness is below 0.4, but vibration levels increase. The study can help engineers to choose reasonable tolerances or enable systems with certain manufacturing tolerances to operate within a more stable range.
9 April 2015 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
The study examines the effect of journal out-of-roundness on the dynamic performance of rotating machines supported by oil film bearings. A general model of a symmetric hydrodynamic journal bearing system allowing for journal out-of-roundness is presented. The results show that the journal out-of-roundness influences the oil film thickness and further influences the dynamic characteristics of the system. The journal out-of-roundness may incur an additional vibration component when the system operates. The amplitude of this vibration component is dependent upon the magnitude of the journal out-of-roundness, while the frequency of which is an integral multiple of the synchronous vibration frequency, depending upon the profile of journal out-of-roundness. Although journal out-of-roundness may increase overall system stability, when dimensionless out-of-roundness is below 0.2, there is little effect; between 0.2 and 0.4, stability is improved but vibration levels are high. When the dimensionless journal out-of-roundness is larger than 0.5, the theoretical analysis shows much uncertainty on the system stability and the boundary of oil film instability is not very clear, this needs further examination from both theoretical and experimental evidences. The system designer should balance between the stability and the vibration level at the design stage.
The road environment of open-pit mines is complex and unstructured. Unmanned construction machinery driving faces huge challenges. Improving the accuracy and speed of obstacle detection during driving is of great significance to ensuring the safety of mine automation construction and improving the efficiency of overall unmanned operations. In view of the fact that the current obstacle detection algorithm struggles to strike a balance between high precision and real-time performance, and there are problems such as difficulty in model deployment or unsuitability for practical applications, a lightweight open-pit mine driving obstacle detection algorithm based on improved YOLOv8s is proposed, which is committed to improving the driving safety of unmanned engineering machinery in open-pit mines. In order to enhance the ability of the backbone to capture features, the idea of the guidance module (CGBlock) of contextual information is introduced to construct a new CGC2f module; the efficient squeeze excitation (ESE) attention mechanism is embedded in the feature fusion layer to make the model pay more attention to the channels containing important feature information; in order to enhance the model’s learning ability for obstacles of different sizes in the open-pit mine, a more suitable dynamic head network (DyHead) is used at the output end; in order to further improve real-time performance, the layer-based adaptive amplitude pruning (LAMP) score algorithm is used to prune redundant weight parameters. To verify the effectiveness of the algorithm in this paper, an experimental verification is carried out on the constructed open-pit mine driving obstacle dataset. The results show that compared with YOLOv8s, the mAP50 of this algorithm reaches 95.3%, the detection speed is increased by 40.2%, the model parameters are reduced by 71.2%, and the calculation amount is reduced by 73.7%. It meets the requirements of real-time and high-precision obstacle detection in open-pit mine driving and provides technical support for smart mine driving.
This study introduces an enhanced ORB-SLAM3 algorithm to address the limitations of traditional visual SLAM systems in feature extraction and localization accuracy within the challenging terrains of open-pit mining environments. It also tackles the issue of sparse point cloud maps for mobile robot navigation. By combining point-line features with a Micro-Electro-Mechanical System (MEMS) Inertial Measurement Unit (IMU), the algorithm improves the feature matching’s reliability, particularly in low-texture areas. The method integrates dense point cloud mapping and an octree structure, optimizing both navigation and path planning while reducing storage demands and improving query efficiency. The experimental results using the TUM dataset and conducting tests in a simulated open-pit mining environment show that the proposed algorithm reduces the absolute trajectory error by 44.33% and the relative trajectory error by 14.34% compared to the ORB-SLAM3. The algorithm generates high-precision dense point cloud maps and uses an octree structure for efficient 3D spatial representation. In simulated open-pit mining scenarios, the dense mapping outperforms at reconstructing complex terrains, especially in low-texture gravel and uneven surfaces. These results highlight the robustness and practical applicability of the algorithm in dynamic and challenging environments, such as open-pit mining.
8 April 2019 in Industrial Lubrication and Tribology
Purpose: This paper aims to investigate how form error of journal affects oil film characteristics, which are composed of several parameters including the maximum film pressure, film moment, frictional coefficient and carrying-load capacity. Design/methodology/approach: A new generalized equation based on the small displacement torsor theory is derived, as well as its capability of representing types of form error on the journal, using four specified parameters in a three-dimensional (3D) state. Based on the new generalized equation of form errors, the Reynolds equation is represented and solved numerically using the Swift–Stieber boundary condition. Findings: The results show that the form errors of journal have significant influence on all oil film characteristics. However, the film moment remains nearly unchanged as film characteristics, especially eccentricity ratio, become large. All film characteristics investigated vary periodically as the form error. More importantly, it is found that the film pressure distribution transforms to an asymmetric shape along the axial direction of the bearing, no longer a symmetric shape in the case of two-dimensional (2D) form errors. It is necessary to substitute the 3D form error model, which takes the variations of the film characteristics in axial direction into account, for the 2D model in the designing stage of journal bearings. Originality/value: First, the effect of the form error of the journal on the performance of hydrodynamic journal bearings is studied in the view of the film characteristics systematically. Secondly, the new generalized equation of form error, derived by SDT theory, is capable of representing any types of form error on the journal, not only representing one type of form error merely.
To obtain discrete element method simulation parameters for cohesive soil during the scrapping process of loaders, this paper calibrates parameters of cohesive soil with different moisture contents based on the Hertz-Mindlin with Johnson-Kendall-Roberts (JKR) Cohesion contact model in Experts in Discrete Element Modeling (EDEM). First, five cohesive soil samples with different moisture contents were prepared. By combining vibration sieving, the inclined plane method, and angle of repose experiments, the measured data ranges of particle size distribution, soil-steel friction coefficient, and angle of repose were obtained. Secondly, the JKR V2 adhesion model was constructed in EDEM. Significant parameters were screened using the Plackett-Burman test. Finally, the response surface analysis range was determined by integrating climbing experiments, and a quadratic regression model was established through Box-Behnken design to optimize parameter combinations. Furthermore, a Particle Swarm Optimization (PSO) algorithm was introduced for single-objective optimization of the angle of repose. The experimental results show that with the increase of moisture content, the angle of repose increases from 30.83° to 37.13°, and the significant parameters are JKR surface energy, soil-soil restitution coefficient, and static friction coefficient. The simulation error of the PSO algorithm is reduced from the maximum 3.38% in the response surface method to within 2.2%. This study provides a high-precision parameterization method for DEM modeling of cohesive soil, offering references for establishing DEM simulations of loaders scraping cohesive soil.