This study evaluates and compares the environmental and economic implications of desktop and laptop computer systems throughout their life cycles using screening life cycle assessment (LCA) and life cycle costing (LCC) methodologies. The functional unit was defined as the use of one computer system for fundamental home and small-business productivity tasks for over four years. The analysis considered the production, use, and end-of-life phases. The results showed the desktop system had a higher overall carbon footprint (679.1 kg CO2eq) compared to the laptop (286.1 kg CO2eq). For both systems, manufacturing contributed the largest share of the emissions, followed by use. Desktops exhibited significantly higher use phase emissions, due to greater energy consumption. Life cycle cost analysis revealed that laptops had slightly lower total costs (EUR 593.88) than desktops (EUR 608.40) over the 4-year period, despite higher initial investment costs. Sensitivity analysis examining different geographical scenarios highlighted the importance of considering regional factors in the LCA. Manufacturer-provided data generally showed lower carbon footprint values than the modeled scenarios. This study emphasizes the need for updated life cycle inventory data and energy efficiency improvements to reduce the environmental impacts of computer systems. Overall, laptops demonstrated environmental and economic advantages over desktops in the defined usage cases.
The pine cone is an important forest product for the Portuguese economy. However, it is associated with environmental impacts, such as the generation of waste and the increased risk of forest fires. The objective of this research is to valorise waste from the production of Pinus pinaster Aiton in the form of natural dyes. The pine cone extracts were characterised in different alkaline solutions (1%, 5% and 10% NaOH) in order to evaluate the dyeing process on cotton knitwear, using the CIELab coordinates. The dyed samples were also subjected to light and water fastness tests. The extracts showed an increase in solids content with increasing alkalinity and a reduction in antioxidant content. The phenol content increased in the extract with 5% but decreased with the 10% concentration. All the dyes expressed a pink colour but with different shades. About the L* coordinate (luminosity), the colours became lighter as the NaOH increased. In the a* coordinate, all the samples had a reddish colour, and, in the b* coordinate, all the samples had a yellowish colour. About light and water fastness, all the samples lost colour, but in the water test, it was not noticeable.
Increasing global water scarcity has intensified the adoption of water reuse as a sustainable strategy, particularly in regions affected by drought and pressure on natural resources. This paper presents a systematic review of the application of Life Cycle Assessment (LCA) in water reuse projects, focusing on research trends, methodological approaches, and opportunities for improvement. A systematic search was conducted in Web of Science, ScienceDirect, and Google Scholar for studies published from 2020 onwards using combinations of the keywords “life cycle assessment”, “LCA”, “water reuse”, “water recycling”, and “wastewater recycling”. Twelve studies were selected from 57 records identified, based on predefined eligibility criteria requiring quantitative LCA of water reuse systems. The results reveal a predominance of European research, reflecting regulatory advances and strong academic engagement in this field. The most frequently assessed impact categories were global warming, eutrophication, human toxicity and ecotoxicity, highlighting the environmental relevance of reuse systems. Energy consumption and water transport were identified as critical hotspots, especially in scenarios involving long distances and fossil-based energy sources. Nevertheless, most studies demonstrate that water reuse is environmentally viable, particularly when renewable energy and optimized logistics are applied. The review also emphasizes the need to better integrate economic and social dimensions and to adapt LCA methodologies to local conditions. Overall, the findings confirm LCA as a robust decision-support tool for sustainable planning and management of water reuse systems.
This academic article presents a comprehensive analysis of the emissions associated with using Pinus pinaster Aiton pine cone waste to produce natural textile dyes, offering a sustainable alternative to synthetic dyes that aligns with decarbonisation objectives and circular economy principles. The main objective was to assess the potential for reducing carbon dioxide equivalent (CO₂ eq) emissions by replacing synthetic dyes with natural dyes derived from residual biomass, applying a Life Cycle Analysis (LCA) framework. The methodology included the experimental extraction of dyes, followed by a characterisation of the pine cone waste, the resulting extract and the pine cone waste, along with a comparative assessment of emissions between the natural and synthetic dye production processes. The study revealed that the pine cone waste had a fixed carbon content of (75.6%), consistent with values for woody waste such as bark and pine cones, which can vary between 75% and 78%, reinforcing previous research. While the extract had a lower fixed carbon content (0.4%), modest compared to other botanical extracts used in the production of textile dyes, the pine cone residue had a moderate fixed carbon content of (1.7%,) showing potential for biochar and adsorption applications. The life cycle analysis revealed that electricity consumption accounted for (85.8%) of emissions during the extraction process, highlighting the importance of increasing energy efficiency. Ultimately, this study emphasises that the production of natural textile dyes from pine cone waste provides substantial environmental advantages, reinforces circular economy practices and offers a viable strategy for sustainability in the textile sector.
Increasing global water scarcity has driven the adoption of water reuse as a sustainable strategy, especially in regions subject to drought and pressure on natural resources. This paper presents a review of the application of Life Cycle Assessment (LCA) in water reuse projects by analyzing trends, methodological approaches, and opportunities for improvement. Twelve studies were selected out of 57 published since 2020, focusing on reuse systems assessed through LCA. The results indicate a predominance of research in Europe, reflecting regulatory advances and academic interests. The most frequent keywords were “water reuse”, “LCA”, and “wastewater treatment”, highlighting the centrality of these themes. The most analyzed environmental impact categories were global warming, human toxicity, eutrophication, and ecotoxicity, present in all studies. Energy transportation and consumption stand out as the most impactful stages of the life cycle, especially in scenarios with large distances or the use of fossil fuels. Despite these challenges, most studies point to the environmental viability of water reuse, especially when renewable sources and logistics optimization strategies are integrated. The critical analysis revealed the need for greater integration of economic and social aspects in the assessments, as well as for adapting the methodologies to the local context. These findings reinforce the role of LCA as an essential tool for making more sustainable water reuse management decisions.
The pine cone is an important forest product for the Portuguese economy. However, it is associated with environmental impacts, such as the generation of waste and the increased risk of forest fires. The objective of this research is to valorise waste from the production of Pinus pinaster Aiton in the form of natural dyes. The pine cone extracts were characterised in different alkaline solutions (1%, 5% and 10% NaOH) in order to evaluate the dyeing process on cotton knitwear, using the CIELab coordinates. The dyed samples were also subjected to light and water fastness tests. The extracts showed an increase in solids content with increasing alkalinity and a reduction in antioxidant content. The phenol content increased in the extract with 5% but decreased with the 10% concentration. All the dyes expressed a pink colour, but with different shades. About the L* coordinate (luminosity), the colours became lighter as the NaOH increased. n the a* coordinate, all the samples had a reddish colour and, in the b* coordinate, all the samples had a yellowish colour. About light and water fastness, all the samples lost colour, but in the water test it was not noticeable.