Manuel Hernando-Revenga

Mr. Manuel Hernando-Revenga

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Manuel Hernando-RevengaManuel Hernando-Revenga
Manuel Hernando-Revenga
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
José Antonio Antonio CHICA CHICA PÁEZJosé Antonio Antonio CHICA CHICA PÁEZ
José Antonio Antonio CHICA CHICA PÁEZ
VOVanesa Ortega-López
Vanesa Ortega-López
Juan Manuel Manso VillalaínJuan Manuel Manso Villalaín
Juan Manuel Manso Villalaín
The production of raw-crushed wind-turbine blade (RCWTB) and its addition to conventionally designed self-compacting Concrete (SCC) enable us to provide a second life to wind-turbine blades. However, SCC containing RCWTB must show proper fresh behavior, an aspect evaluated in this paper both experimentally and through simulations based on computational fluid dynamics (CFD) for RCWTB additions up to 3.0% by volume. In experimental terms, RCWTB reduced the flowability and passing ability of SCC, and slowed SCC flow, although the performance of SCC with 1.5% RCWTB was adequate under free-flow conditions. In terms of modeling, RCWTB did not impact yield stress and increased plastic viscosity. CFD modeling under free flow, regardless of the presence or not of obstacles simulating concrete reinforcement, was successful, especially in the long term. Nevertheless, the modeling of the passing ability was not accurate; precision could be improved by simulating the effect of the individual GFRP fibers within the SCC flow. Finally, the mechanical properties of SCC were negatively impacted by RCWTB, the stitching effect of the GFRP fibers not being effective in an SCC with a conventional design. A specific SCC design when adding RCWTB is therefore needed to advance in the use of this waste in this concrete type.

19 December 2024 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
Manuel Hernando-RevengaManuel Hernando-Revenga
Manuel Hernando-Revenga
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
NHNerea Hurtado-Alonso
Nerea Hurtado-Alonso
Javier Manso-MoratoJavier Manso-Morato
Javier Manso-Morato
VOVanesa Ortega-López
Vanesa Ortega-López
Wind-turbine blades pose significant disposal challenges in the wind-energy sector due to the increasing demand for wind farms. Therefore, this study researched the revaluation of Raw-Crushed Wind-Turbine Blade (RCWTB), obtained through a non-selective blade crushing process, as a partial substitute for aggregates in Self-Compacting Concrete (SCC). The aim was to determine the most adequate water/cement (w/c) ratio and amount of superplasticizing admixtures required to achieve adequate flowability and 7-day compressive strength in SCC for increasing proportions of RCWTB, through the production of more than 40 SCC mixes. The results reported that increasing RCWTB additions decreased the slump flow of SCC by 6.58% per 1% RCWTB on average, as well as the compressive strength, although a minimum value of 25 MPa was always reached. Following a multi-criteria decision-making analysis, a w/c ratio of 0.45 and a superplasticizer content of 2.8% of the cement mass were optimum to produce SCC with up to 2% RCWTB. A w/c ratio of 0.50 and an amount of superplasticizers of 4.0% and 4.6% were optimum to produce SCC with 3% and 4% RCWTB, respectively. Concrete mixes containing 5% RCWTB did not achieve self-compacting properties under any design condition. All modifications of the SCC mix design showed statistically significant effects according to an analysis of variance at a confidence level of 95%. Overall, this study confirms that the incorporation of RCWTB into SCC through a careful mix design is feasible in terms of flowability and compressive strength, opening a new research avenue for the recycling of wind-turbine blades as an SCC component.

30 November 2025 in Environmental Research
Verified
Journal Article
Open access
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
Manuel Hernando-RevengaManuel Hernando-Revenga
Manuel Hernando-Revenga
CMChaimae Mourou
Chaimae Mourou
RSRoberto Serrano-López
Roberto Serrano-López
The use of Coarse Recycled Aggregate (CRA) in Low-Strength Concrete (LSC), suitable for pavements, allows the sustainable revaluation of this waste material, but worsens its performance. Recycled fibers of Glass Fiber-Reinforced Polymer (GFRP) present in Raw-Crushed Wind-Turbine Blade (RCWTB) may counterbalance the detrimental effects caused by CRA addition. This research analyzes the mechanical properties, durability, cost and carbon footprint of LSC mixes with 50 % and 100 % CRA combined with 0 % and 10 % RCWTB. Stitching of the cementitious matrix by GFRP fibers improved flexural strength and energy absorption of LSC containing CRA. In addition, these fibers exerted a barrier effect against water passage and exhibited higher surface hardness, the addition of RCWTB therefore did not affect the water-absorption rate and effective porosity and increased the abrasion resistance of LSC. Finally, RCWTB also reduced the cost and carbon footprint of LSC. These enhancements caused by RCWTB were analyzed through Multi-Criteria Decision-Making (MCDM) and Response Surface Methodology (RSM), approaches novel in the literature. According to them, the joint use of CRA and RCWTB in LSC was recommended. PROMETHEE II algorithm indicated that the use of 10 % RCWTB combined with 100 % CRA was the best option due to economic and environmental advantages, as this algorithm only considered which LSC mixture was the best for each property. ELECTRE algorithm showed indifference between both CRA contents, due to the better mechanical and durability performance of 50 %-CRA LSC. TOPSIS algorithm and RSM models revealed a preference for 50 % CRA and 10 % RCWTB following quantitative calculations based on the magnitudes of the property differences between the mixes. This research demonstrates the broad suitability of LSC containing both CRA and RCWTB in construction applications, mainly regarding pavements.

21 October 2025 in Materials and Structures
Verified
Journal Article
Open access
PDF file
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
Manuel Hernando-RevengaManuel Hernando-Revenga
Manuel Hernando-Revenga
CMChaimae Mourou
Chaimae Mourou
VOVanesa Ortega-López
Vanesa Ortega-López
The crushing of the glass fiber-reinforced polymer (GFRP) previously separated from the other wind-turbine-blade materials produces a waste with minimum contents of deformable particles of balsa wood and polymers, being mainly composed of GFRP-composite fibers. This residue is named selectively crushed wind-turbine blade (SCWTB). This research evaluates the impact of adding up to 6.0% by volume of SCWTB on the deformability, load-bearing capacity and energy absorption of concrete subjected to compression, bending, and indirect-tensile stresses. SCWTB increased the failure strain of concrete in the direction parallel to a compression load, although it led the failure and fracture strains to match. However, the strain increase from failure to fracture was 2000–3000 µε in the transverse direction to loading, so concrete with SCWTB was load-bearing after failure. GFRP-composite fibers’ stitching effect was more noticeable under bending stresses. Thus, 1.5% vol. and 6.0% vol. SCWTB resulted in almost the same bending failure stress in concrete, around 6.1–6.2 MPa, and contents from 3.0 and 6.0% vol. SCWTB provided load-bearing capacity in simple and notched-specimen bending, respectively. In addition, the low content of deformable particles in SCWTB increased the deflection increment from failure to fracture in bending, although the presence of such particles augmented energy absorption. No SCWTB content provided load-bearing capacity under indirect-tensile stresses, although it did increase pre-failure deformability. In general, the energy absorbed by concrete increased by up to 43% when adding SCWTB, the use of up to 6.0% of this waste being recommended to increase the ductility of concrete. Graphical abstract

13 February 2026 in Education Sciences
Verified
Journal Article
Open access
PDF file
VRVíctor Revilla-Cuesta
Víctor Revilla-Cuesta
Manuel Hernando-RevengaManuel Hernando-Revenga
Manuel Hernando-Revenga
IMIsmael Martín
Ismael Martín
MSMarta Skaf
Marta Skaf
VOVanesa Ortega-López
Vanesa Ortega-López
Peer- and self-critical skills are key to properly performing engineering work, as they allow engineering students to develop critical thinking regarding the quality standards required in this professional field. This research aimed to determine whether educational experiences based on temporal survey-based programs enabled the successful development of these skills in students enrolled in six courses in the final years of their engineering degrees. To this end, an educational experience of such a nature was implemented throughout a complete academic year, aimed at fostering peer- and self-critical skills through continuous formative assessment. The experience involved six student presentations evaluated by both teachers and peers using a Likert-scale survey encompassing four dimensions: explanatory ability, file quality, attitude, and overall assessment. Subsequently, these assessments were provided to students to encourage reflection on the scores assigned and their own work. The results revealed strong alignment between teacher and peer evaluations, with average deviations below 7%, demonstrating effective development of peer-critical competences. These results were also verified by means of analyses of variance. The greatest consistency was found in “explanatory ability” and “overall assessment,” while “file quality” and “attitude” showed wider variability, experience playing a key role in their precise evaluation. Peer evaluations tended to be more uniform than teachers’, reflecting students’ limited experience in discerning subtle performance differences. Additionally, 30% of students expressed willingness to repeat their final presentation to achieve a higher grade, evidencing substantial self-critical reflection. Qualitative analysis conducted through deductive cross-coding indicated that this motivation stemmed from both intrinsic self-improvement and peer-related responsibility. Overall, the results confirm that sustained peer- and self-assessment activities can effectively cultivate critical thinking skills among engineering students, although continuous practice is required to consolidate these competences. Future research could explore the more adequate course types, and students’ ages to perform such kind of educational experiences.

1 June 2026 in EDULEARN Proceedings
Verified
Conference Paper
Closed access
PDF file
NHNerea Hurtado-Alonso
Nerea Hurtado-Alonso
MSMarta Skaf
Marta Skaf
AEAna Belén Espinosa
Ana Belén Espinosa
Manuel Hernando-RevengaManuel Hernando-Revenga
Manuel Hernando-Revenga
Juan Manuel Manso VillalaínJuan Manuel Manso Villalaín
Juan Manuel Manso Villalaín