Biocomposites, made from biobased polymers with natural fibre reinforcement, offer a feasible path towards environment friendly and sustainable materials. However, biocomposites have struggled to attract ta market that is mostly dominated by conventional fossil-based polymers. To increase the cost efficiency and extend the lifespan of biocomposites, the effects of mechanical recycling on their properties should be thoroughly explored. While there has been some research on recycling natural fibre-reinforced biocomposites, limited attention has been paid to biocomposites reinforced with softwood fibre. This study investigates the impact of mechanical recycling on poly-lactic acid (PLA) biocomposites reinforced with bleached and unbleached softwood kraft pulp fibres at 15 wt% and 30 wt%. The results show that single-stage mechanical recycling improves Young’s modulus by 11–13% while maintaining impact strength. Tensile strength remains stable for biocomposites with 15 wt% fibre but decreases by 6–8% for with 30 wt% biocomposites. Recycling improves fibre dispersion by reducing agglomeration but leads to PLA degradation, which could potentially be mitigated by adding virgin polymer or chain extenders. These findings highlight the potential for reusing PLA-softwood fibre biocomposites while emphasizing the need for further research into multiple recycling cycles.
Global regulations are guiding society towards more sustainable material solutions. This increasing awareness of the need for environmentally friendly alternatives has led to a greater emphasis on biocomposites, which combine natural fibers with bio-based polymers. This study investigates how bleached softwood pulp fibers (BSWPF) and unbleached softwood pulp fibers (UBSWPF) affect the characteristics of poly(lactic acid) (PLA)-based biocomposites. UBSWPF is a more cost-effective option because it is manufactured with less processing steps than BSWPF. However, it is largely unexplored as a reinforcement in biopolymers. Through investigating the mechanical, thermal, and morphological aspects of the biocomposites, this study showed that UBSWP increased the modulus and impact strength of the PLA biocomposites better than BSWPF. The impact strength, modulus, and tensile strength of PLA-BSWPF and PLA-UBSWPF improved as the fiber content increased. However, a decrease in tensile strength was seen at higher percentages of UBSWPF in PLA. Despite the decrease in tensile strength at higher UBSWPF concentrations, both types of fibers improved the mechanical properties of the biocomposites, demonstrating a potential sustainable reinforcing material for PLA biocomposites.