Biocomposites, made from biobased polymers with natural fibre reinforcement, offer a feasible path towards environment friendly and sustainable materials. However, biocomposites have struggled to attract ta market that is mostly dominated by conventional fossil-based polymers. To increase the cost efficiency and extend the lifespan of biocomposites, the effects of mechanical recycling on their properties should be thoroughly explored. While there has been some research on recycling natural fibre-reinforced biocomposites, limited attention has been paid to biocomposites reinforced with softwood fibre. This study investigates the impact of mechanical recycling on poly-lactic acid (PLA) biocomposites reinforced with bleached and unbleached softwood kraft pulp fibres at 15 wt% and 30 wt%. The results show that single-stage mechanical recycling improves Young’s modulus by 11–13% while maintaining impact strength. Tensile strength remains stable for biocomposites with 15 wt% fibre but decreases by 6–8% for with 30 wt% biocomposites. Recycling improves fibre dispersion by reducing agglomeration but leads to PLA degradation, which could potentially be mitigated by adding virgin polymer or chain extenders. These findings highlight the potential for reusing PLA-softwood fibre biocomposites while emphasizing the need for further research into multiple recycling cycles.
26 August 2026 in Annual Transactions of the Nordic Rheology Society
Cellulosic materials are increasingly explored as renewable building blocks for applications such as packaging, insulation, and construction. Conventional production of microfibrillated cellulose (MFC) is energy intensive and results in suspensions with strong gel-like behavior even at low solids contents.1-3 High-consistency mechano-enzymatic fibrillation of cellulose (HC MFC, previously referred as HefCel) has emerged as a lower-energy alternative, enabling the production of MFC directly at high solid contents.2, 4 In this work, the rheological behavior of HC MFC is investigated over a range of concentrations in both fiber suspensions and fiber foams. Two grades of HC MFC, coarse and fine, are studied to elucidate the effects of fiber content and fibrillation degree on viscoelastic and flow properties. Commercial MFC is used as a reference material to benchmark the behavior of HC MFC against established systems. The results show that HC MFC suspensions and foams exhibit a predominantly elastic response at small deformations over the entire range of fiber consistencies studied (2.5-15 wt% for suspensions, 2.5-7.5 wt% for foams). Rheological properties depend systematically on fiber content and fibrillation degree, reflecting differences in fiber network strength. Compared with commercial MFC, HC MFC shows much lower stiffness and therefore improved processability at high fiber consistencies. These findings support the potential of HC MFC in the production of sustainable, low-density fiber-based materials.