Nithesh K

Dr. Nithesh K

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2024 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
ASAshwin Shetty
Ashwin Shetty
TBThirumaleshwara Bhat
Thirumaleshwara Bhat
SSSathyashankara Sharma
Sathyashankara Sharma
AHAnanda Hegde
Ananda Hegde
NKNithesh K
Nithesh K
GAGajanan Anne
Gajanan Anne
This study investigates the effects of magnesium (Mg) content, silicon carbide (SiC) reinforcement, and aging temperature (AT) on the ultimate tensile strength (UTS) and Brinell hardness number (BHN) of eutectic Al-Si composites using a full factorial experimental approach. The analysis reveals that increasing Mg content from 0 wt% to 1.5 wt% significantly enhances UTS, likely due to solid solution strengthening and improved particle reinforcement. Similarly, a rise in SiC content up to 4 wt% leads to a notable increase in UTS, indicating effective matrix reinforcement. AT is crucial, with the highest UTS achieved at 100 °C; however, overaging at 200 °C results in reduced strength due to precipitate coarsening. Interaction plots demonstrate a synergistic effect between Mg and SiC, where higher levels of both contribute to a more substantial increase in UTS. The results also show that while both Mg and SiC improve UTS, their effects are optimized with appropriate aging conditions, although overaging diminishes these benefits. Analysis of variance (ANOVA) highlights that AT, Mg, and SiC each significantly impact UTS and BHN, with SiC having the greatest effect of 47.92% on hardness and AT having the greatest effect of 36.58% on the UTS. The interaction between SiC particles and AT is particularly influential on BHN. These findings emphasize the importance of carefully optimizing processing conditions to enhance the mechanical properties of eutectic Al-Si composites.

1 January 2023 in Materials Research
Verified
Journal Article
Open access
PDF file
NKNithesh K
Nithesh K
SSSathyashankara Sharma
Sathyashankara Sharma
RNRajesh Nayak
Rajesh Nayak
GMGowrishankar MC
Gowrishankar MC
KMKarthik B M
Karthik B M
DSDoddapaneni Srinivas
Doddapaneni Srinivas
The present study reflects on the wear behaviour characteristics of A356 composite with trace addition of copper and copper-coated zinc as reinforcements. Dry sliding wear tests were conducted on fabricated as-cast and heat treated composites by varying load of 20-60 N under constant sliding speed of 1 m/s and sliding distance of 3000 m. Results confirmed that copper-coated zinc was successfully introduced as reinforcement into A356 matrix using two-step casting method. Scanning Electron Microscope (SEM) images confirmed the presence and homogeneous distribution of the added reinforcements in the matrix. T6 treatment with addition of Cu reinforcement facilitated age hardening showing 121% hardness improvement compared to as-cast matrix A356. At lower loads, wear results showed 117-134% enhanced wear resistance in composite reinforced with 1 wt.% Cu and aging at 100°C. However at higher loads, 153-210% improvement in wear resistance was observed. Overall, copper and Cu-coated zinc reinforced composite along with T6 treatment exhibited significant improvement in hardness wear property compared to as-cast matrix A356 alloy.

Verified
Journal Article
Open access
PDF file
GDG DIVYA DEEPAK
G DIVYA DEEPAK
NKNithesh K
Nithesh K
KMKarthik B M
Karthik B M
VNVIGHNESHA NAYAK
VIGHNESHA NAYAK
GAGajanan Anne
Gajanan Anne
SSSathyashankara Sharma
Sathyashankara Sharma
Recent progress in metal matrix composites (MMCs) has led to significant research efforts aimed at refining reinforcement methods and processing techniques and enhancing material properties. Incorporating reinforcements has notably improved both mechanical strength and tribological performance while addressing issues such as porosity and particle agglomeration. This study investigates the impact of copper reinforcement (1–4 wt.%) on the tribological characteristics of A356 alloy under both as-cast and heat-treated conditions. The process of heat treatment involved age hardening, where the composites were solution heat treated (SHT) at 535 °C for 2 h, followed by rapid quenching and aging at 100 °C and 200 °C. The results demonstrate that increasing the copper content enhances the composite’s mechanical properties. Specifically, heat treatment promoted the redistribution of the Al2Cu intermetallic phase during peak aging, leading to improved hardness and wear resistance. Wear testing demonstrated that heat-treated composites exhibited significantly better wear resistance than their as-cast counterparts, with improvements of 50–60% under lower loads and 80–90% under higher loads. Among the tested samples, A356 alloy reinforced with 4 wt.% copper showed the lowest wear rate across all the applied loads, along with a reduced coefficient of friction and enhanced load-bearing capacity, minimizing material deformation. Additionally, aging at 100 °C resulted in the greatest hardness and the lowest wear rate in comparison to untreated A356 alloy. These findings underscore the viability of copper-reinforced A356 composites for applications demanding enhanced mechanical characteristics and wear resistance.

28 June 2024 in Cogent Engineering
Verified
Journal Article
Open access
NKNithesh K
Nithesh K
SSSathyashankara Sharma
Sathyashankara Sharma
GMGowrishankar MC
Gowrishankar MC
RNRajesh Nayak
Rajesh Nayak
AHAnanda Hegde
Ananda Hegde
KMKarthik B M
Karthik B M