Casting AISI 52100 steel represents a challenge, particularly at the start of the casting sequence, due to its low melting point. The steel spilling over the tundish bottom cools down rapidly and freezes in the stopper rods, obliging the closure of a strand. Therefore, an additional function of turbulence inhibitors is to induce steel masses at a slow cooling rate. This paper deals with the physical and mathematical modeling of unsteady state-flows using two turbulence inhibitors (TIs) during the sequence start. One of the TIs makes steel spill forming thin layers of liquid on the tundish bottom, while the other forms a thicker layer. Based on the Flow of Volume Model, the mathematical simulation was satisfactorily replicated in the water model.
The study analyzes the splash dynamics of liquid steel jets impacting solid surfaces, using a physical model with scaled-down water experiments. Two turbulence inhibitor designs are compared, focusing on droplet formation and distribution. The interaction of the jet with the inhibitors influences droplet generation and dispersion, impacting the safety and quality of the continuous casting process. Key parameters such as the Weber number and surface tension are identified as factors affecting the stability of liquid films. Finally, similarities between splash dynamics in water and steel are highlighted.