Ethylene/1-octene copolymers exhibit enhanced flexibility and impact resistance compared to polyethylene, which makes them well suited for applications in advanced plastics and elastomers. United-atom molecular dynamics (MD) simulations were conducted to explore the mechanical behavior and deformation mechanisms of ethylene/1-octene copolymers under uniaxial tensile loading. This study systematically examined the influence of temperature, polymer chain length, chain quantity, and strain rate, with a specific focus on how hexyl branch content impacts the mechanical properties of amorphous ethylene/1-octene copolymers. The simulation results indicate that as the branch content increases, the yield strength and elastic modulus decrease, suggesting a trade-off between flexibility and mechanical strength. Energy decomposition analysis reveals that copolymers with more branched chains undergo greater changes in van der Waals energy. Additionally, as the branch content increases, the reduction in dihedral angle energy in the strain hardening region becomes more gradual, and the rate and the extent of the transition of dihedral angles from gauche to trans conformation decrease under deformation. Ethylene/1-octene copolymers exhibit higher chain entanglement parameters compared to linear polyethylene, with these parameters increasing as the branch content rises. Moreover, increasing the branch content results in a less pronounced increase in chain orientation along the loading direction.
The four-screw extruder (FSE) is a novel equipment for polymer processing. In this paper, from a new viewpoint of Lagrangian coherent structures (LCS), two-dimensional fluid transport and chaotic mixing characteristics within three kinds of novel industrial FSEs are explored based on LCS to better understand the flow and mixing natures in the FSEs. Firstly, based on the finite-time invariant manifold theory, the finite-time Lyapunov exponent (FTLE) and LCS of FSEs are calculated by considering the different initial time. Hyperbolic LCSs from the FTLE maps are adopted to identify chaotic mixing manifolds in FSEs. Moreover, particle tracking and Poincaré sections are used to illustrate the different fluid motions in the above three isolated regions. Finally, the effects of relative rotating directions and layout of four screws on the chaotic manifolds in FESs are discussed in order to enhance local mixing performance. Furthermore, quantitative mixing measures, such as the segregation scale, logarithmic of stretching, and mean-time mixing efficiency are employed to compare the mixing efficiencies in three kinds of FSEs. The results show that the relative rotating directions and positions of four screws can change the chaotic manifolds and increase mixing performance in local poor mixing regions. FTLE and LCS analysis are helpful to better understand the chaotic mixing nature in the novel screw extruders.
The performance of ethylene/1-octene copolymer primarily depends on the microstructure of the polymer chain. This study employed a new method to control the inter-distribution of hexyl chain branches directly on the backbone of the ethylene/1-octene copolymer. Three ethylene/1-octene copolymers with different inter-distributions of hexyl chain branches were synthesized using [Me2Si(C5Me4) (NtBu)] TiCl2 (Ti–CGC) by different feeding sequences in the semi-continuous polymerization reaction system. The three copolymers were named according to the feeding sequence of the materials: ethylene/1-octene/Ti–CGC (EOC), 1-octene/Ti–CGC/ethylene (OCE), and ethylene/Ti–CGC/1-octene (ECO), respectively. The structure and properties of the copolymers were characterized using HT-GPC, 13C-NMR, DSC, WAXD, DMA, MI, and Uniaxial Tension Test. The results showed that the feeding sequence greatly affected the comonomer distribution of the molecular chains, molecular weight, molecular weight distribution, and chemical composition of the copolymers, consequently influencing their thermal performance and mechanical properties. Thus, it is probable that one could obtain an ethylene/1-octene copolymer with designed properties by controlling the feeding sequence during the ethylene/1-octene semi-continuous copolymerization process.
The development of polyolefin catalysts plays a pivotal role in driving advancements within the polyolefin industry. In this study, five ligands (L1–L5) and six Hf (Hf 1-5) and Zr (Zr-1) metal complexes with amido-quinoline-based ligands were successfully synthesized by a simple and efficient synthetic route. The new Hf (Hf 1-5) and Zr (Zr-1) complexes exhibit high thermal stability, moderate activity, and excellent 1-octene incorporation capability. As a result, they have been successfully utilized in high-temperature solution-phase polymerization to produce polyolefin elastomers (POEs). The electron-donating effect of the ligand was identified as a crucial factor contributing to the improved catalytic performance and comonomer incorporation capability. The steric effects of substituents on the ligand have little impact on the olefin copolymerization activity, molecular weight, and comonomer incorporation capability. The Hf-1 complex demonstrates outstanding copolymerization activity and comonomer incorporation (8.3 × 106 g polymer/(mol catalyst · h), 26 wt%), offering significant potential for large-scale operations and practical applications.
Accurate knowledge of phase behavior in polyolefin–solvent mixtures is critical for ensuring stable operation and safe scale-up of industrial solution polymerization processes. The binary (n-hexane + ethylene/1-octene copolymer, POE96k-10) and ternary (α-olefin + n-hexane + POE96k-10) phase behaviors were investigated via a visual high-pressure cell (POE96k-10: Mw = 96 kg·mol–1, Mw/Mn = 3.87, 1-octene mole fraction = 10.31 mol%) at temperatures of 380~480 K and pressures as high as 14 MPa. To systematically analyze the effects of α-olefin mass fraction and type on phase transition, four industrially relevant α-olefins (ethylene, 1-butene, 1-hexene, and 1-octene) were investigated. The results show that the phase transition temperature and pressure for liquid–liquid and liquid–vapor transitions show an approximately linear dependence on α-olefin mass fraction. Ethylene, 1-butene, and 1-hexene lower the phase transition temperature, whereas 1-octene increases it. Ethylene exhibits a strong anti-solvent effect, significantly lowering the transition temperature while increasing the phase transition pressure. The modified Sanchez-Lacombe equation of state (MSL EOS) effectively correlates and reproduces the phase equilibrium data of the α-olefin + n-hexane + POE96k-10 ternary systems, though its accuracy decreases with increasing α-olefin chain length.