The goal of this work was to study the bioleaching of arsenic-containing polymetallic concentrate that contained 6.2% Cu, 7.3% Zn and 1.7% As, depending on different temperatures and in the presence of CO2 and molasses in the medium, as well as the difference in the composition of microbial population formed under various conditions. A mixed population of moderately thermophilic and thermotolerant acidophilic microorganisms formed during the continuous bioleaching of copper concentrate was used as an inoculum. The experiments were carried out in a continuous mode in laboratory scale reactors, with a temperature range of 40 °C to 60 °C. To assess the effect of CO2 and molasses on metal leaching and microbial population composition, the experiments were carried out in three reactors: CO2 (~0.01 L/min) was supplied into the first reactor; 0.02% molasses were added to the pulp of the second reactor; and no additional carbon sources were supplied into the control reactor. The highest copper recovery (27%) was achieved at 50°C in the experiment with molasses, while the highest zinc recovery (82.1%) was reached at 45°C in the control experiment. Additional carbon sources affected the extraction of non-ferrous metals only at 60 °C and increased the extraction of copper and zinc by 12.6% and 24.2%, respectively. Both the temperature and carbon source used affected the microbial population composition. The main microbial genera revealed in the populations by next generation sequencing (NGS) were bacteria of the genera Sulfobacillus and Acidithiobacillus, as well as archaea of the genera Ferroplasma, Acidiplasma, and Cuniculiplasma. At low temperatures (40 and 45 °C), Acidithiobacillus, Sulfobacillus, and Ferroplasma predominated, while at temperatures 50–55 °C, the decrease in relative abundance of these genera occurred, and the predominance of Acidiplasma archaea was observed. The usage of both CO2 and molasses led to the increase in Sulfobacillus and Acidiplasma in relative abundance.
Gold recovery from refractory pyrite-arsenopyrite concentrates using stirred tank reactor biooxidation is widely applied worldwide. Therefore, studies to address the characteristic problem of this technology are urgent. The goal of the present work was to research the possibility of counteracting the negative effects of unfavorable conditions (increasing pulp density and temperature) on the biooxidation of pyrite-arsenopyrite concentrate in laboratory-scale stirred tank reactors using additional carbon supply in the form of CO2. A refractory concentrate containing pyrite (48%) and arsenopyrite (13%) was used in biooxidation experiments. In the control experiment, biooxidation was performed under “normal conditions”: temperature 40 °C, pulp density (solid to liquid ratio, S:L) 1:10, residence time 5 days. It was shown that under “normal conditions”, additional carbon dioxide supply insignificantly affected the biooxidation rate and composition of the microbial population of biooxidation reactors. In addition, the effect of “stressful conditions” was studied. In this case, either temperature or pulp density were increased (up to 50 °C and S:L 1:5, respectively), which provided unfavorable conditions for biooxidation and led to the decrease in biooxidation rate. Under “stressful conditions”, additional carbon dioxide supply affected biooxidation to a greater extent and made it possible to increase both pyrite and arsenopyrite biooxidation rates. The analysis of microbial populations showed that additional carbon dioxide supply also changed their composition.
The aim of this study was to investigate the potential for co-bioleaching of ground printed circuit boards (PCBs) and flotation tailings using a single-stage biohydrometallurgical process. The ground PCB sample was a finely divided waste product from industrial shredding, which was collected using an air filtration system. The flotation tailings sample was mainly composed of pyrite (49%), quartz (29%), gypsum (8%), feldspar (8%), and chlorite (6%). The experiment was carried out in laboratory-scale reactors at 35 °C with constant aeration and a flotation tailings pulp density of 5% (solid-to-liquid ratio). In a control reactor, only flotation tailings were leached. In an experimental reactor, both flotation tailings and ground PCBs were leached simultaneously. The experiment was conducted in two stages. In the first stage, the experiment was carried out in a batch mode. The second stage involved two reactors operating continuously in cascade. During the experiment, we monitored the dynamics of several key parameters as a function of PCB concentration, including pH, redox potential, the concentrations of Fe3+ and Fe2+ ions, and the number of microbial cells. The 16S rRNA gene analysis revealed that the presence of PCBs had a significant effect on the composition of the microbial community. The concentration of PCB was gradually increased in order to examine the limits of the process and optimize potential economic benefits. The increase was done in 3 stages: 5 g/L in the first stage, from 5 to 12 g/L in the second stage, and up to 35.5 g/L in the third stage. However, this increase had a negative effect on the pyrite oxidation rate and the effectiveness of PCB bioleaching in continuous mode. The bioleaching efficiency of copper from printed circuit boards (PCBs) was above 70% in batch mode and above 80% in continuous mode at PCB concentrations up to 12 g per liter. Copper recovery decreased to around 53.1–61.6% as the PCB concentration continued to increase. The nickel leaching efficiency in batch mode was 46.3 ± 4.8%. In continuous mode, the nickel recovery decreased as the PCB concentration increased, reaching 48.53% in the first stage, then declining to 37.62% in the second stage and finally dropping to 27.06% in the third stage, depending on the higher concentration of PCB.