Sustainable forestry requires efficient regeneration methods to ensure that new forests are established quickly. In Sweden, 99% of the planting is manual, but finding labor for this arduous work is difficult. An autonomous scarifying and planting machine with high precision, low environmental impact, and a good work environment would meet the needs of the forest industry. For two years, a collaborative group of researchers, manufacturers, and users (forest companies) has worked together on developing and testing a new concept for autonomous forest regeneration (Autoplant). The concept comprises several subsystems, i.e., regeneration and route planning, autonomous driving (path planning), new technology for forest regeneration with minimal environmental impact, automatic plant management, crane motion planning, detection of planting spots, and follow-up. The subsystems were tested separately and integrated together during a field test at a clearcut. The concept shows great potential, especially from an environmental perspective, with significantly reduced soil disturbances, from approximately 50% (the area proportion of the area disturbed by disc trenching) to less than 3%. The Autoplant project highlights the challenges and opportunities related to future development, e.g., the relation between machine cost and operating speed, sensor robustness in response to vibrations and weather, and precision in detecting the size and type of obstacles during autonomous driving and planting.

Topography estimation is essential for autonomous off-road navigation. Common methods rely on point cloud data from, e.g., Light Detection and Ranging sensors (LIDARs) and stereo cameras. Stereo cameras produce dense point clouds with larger coverage but lower accuracy. LIDARs, on the other hand, have higher accuracy and longer range but much less coverage. LIDARs are also more expensive. The research question examines whether incorporating LIDARs can significantly improve stereo camera accuracy. Current sensor fusion methods use LIDARs’ raw measurements directly; thus, the improvement in estimation accuracy is limited to only LIDAR-scanned locations The main contribution of our new method is to construct a reference ground plane through the interpolation of LIDAR data so that the interpolated maps have similar coverage as the stereo camera’s point cloud. The interpolated maps are fused with the stereo camera point cloud via Kalman filters to improve a larger section of the topography map. The method is tested in three environments: controlled indoor, semi-controlled outdoor, and unstructured terrain. Compared to the existing method without LIDAR interpolation, the proposed approach reduces average error by 40% in the controlled environment and 67% in the semi-controlled environment, while maintaining large coverage. The unstructured environment evaluation confirms its corrective impact.