This study developed an integrated approach for estimating tropical forest aboveground biomass (AGB) by combining UAV–LiDAR structural metrics and Sentinel-2B spectral data, optimized through successive projections algorithm (SPA) feature selection and random forest (RF) regression. Field surveys across three tropical forest sites in Hainan Province (49 plots) provided ground-truth AGB measurements, while UAV–LiDAR (1 m resolution) and Sentinel-2B (10 m) data were processed to extract 98 and 69 features, respectively. The results showed that LiDAR-derived elevation metrics (e.g., percentiles and kurtosis) correlated strongly with the AGB measurements (r = 0.652–0.751), outperforming Sentinel-2B vegetation indices (max r = 0.520). SPA–RF models with selected features significantly improved accuracy compared to full-feature RF, achieving R² = 0.670 (LiDAR), 0.522 (Sentinel-2B), and 0.749 (coupled data), with the fusion model reducing errors by 46–54% in high-biomass areas. Despite Sentinel-2B’s spectral saturation limitations, its integration with LiDAR enhanced spatial heterogeneity representation, particularly in complex canopies. The 200-iteration randomized validation ensured a robust performance, with mean absolute relative errors of ≤0.071 for fused data. This study demonstrates that strategic multi-sensor fusion, coupled with SPA-optimized feature selection, significantly improves tropical AGB estimation accuracy, offering a scalable framework for carbon stock assessments in support of Reducing Emissions from Deforestation and Forest Degradation (REDD+) and climate mitigation initiatives.

For tropical rainforest regions with dense vegetation cover, the development of effective large-scale soil mapping methods is crucial to improve soil management practices to replace the time-consuming and laborious conventional approaches. While machine learning (ML) algorithms demonstrate superior predictability of soil properties over linear models, their practical and automated application for predicting soil properties using remote sensing data requires further assessment. Therefore, this study aims to integrate Unmanned Aerial Vehicles (UAVs)-based hyperspectral images and Light Detection and Ranging (LiDAR) points to predict the soil properties indirectly in two tropical rainforest mountains (Diaoluo and Limu) in Hainan Province, China. A total of 175 features, including texture features, vegetation indices, and forest parameters, were extracted from two study sites. Six ML models, Partial Least Squares Regression (PLSR), Random Forest (RF), Adaptive Boosting (AdaBoost), Gradient Boosting Decision Trees (GBDT), Extreme Gradient Boosting (XGBoost), and Multilayer Perceptron (MLP), were constructed to predict soil properties, including soil acidity (pH), total nitrogen (TN), soil organic carbon (SOC), and total phosphorus (TP). To enhance model performance, a Bayesian optimization algorithm (BOA) was introduced to obtain optimal model hyperparameters. The results showed that compared with the default parameter tuning method, BOA always improved models’ performances in predicting soil properties, achieving average R² improvements of 202.93%, 121.48%, 8.90%, and 38.41% for soil pH, SOC, TN, and TP, respectively. In general, BOA effectively determined the complex interactions between hyperparameters and prediction features, leading to an improved model performance of ML methods compared to default parameter tuning models. The GBDT model generally outperformed other ML methods in predicting the soil pH and TN, while the XGBoost model achieved the highest prediction accuracy for SOC and TP. The fusion of hyperspectral images and LiDAR data resulted in better prediction of soil properties compared to using each single data source. The models utilizing the integration of features derived from hyperspectral images and LiDAR data outperformed those relying on one single data source. In summary, this study highlights the promising combination of UAV-based hyperspectral images with LiDAR data points to advance digital soil property mapping in forested areas, achieving large-scale soil management and monitoring.

Forest mapping using remote sensing has made considerable progress over the past decade, but substantial uncertainties remain in complex regions, particularly where terrain and climate vary dramatically. Yunnan Province, China, represents such a challenging case, with its diverse climatic zones ranging from tropical to temperate and its topography spanning over 6500 m in elevation. These factors contribute to substantial variation in vegetation types, complicating the accurate identification of forest cover through remote sensing. This study aims to enhance forest mapping in Yunnan by leveraging multi-temporal remote sensing data from Sentinel-2 and Landsat 8/9 imagery, incorporating key phenological stages—such as the leaf greening (GRN) period, as well as the senescence, defoliation, and foliation (SDF) stages of deciduous forests—along with kNDVI and terrain factors. A random forest (RF) classifier was applied on the Google Earth Engine (GEE) platform to create a 10 m resolution forest map (LS2-RF). This map achieved an overall accuracy of 96.35% when validated with 1572 ground samples, significantly outperforming existing global datasets, such as Dynamic World (73.88%) and WorldCover (87.66%). These maps agreed well in extensive forested areas; discrepancies were noted in mixed land types, including farmland, urban areas, and regions with fragmented landscapes. In 2022, Yunnan’s forest cover was 60.40%, with higher coverage in the southwestern region and lower in the northeast. The largest forested area was found in Pu’er City, while the smallest was in Yuxi City. Forests were most abundant at elevations between 1500 and 2500 m (occupying 52.29% of the total forest area) and slopes of 15° to 25° (occupying 39.19% of the total forest area). Conversely, forest cover was lowest in areas below 500 m elevation (occupying 0.64% of the total forest area) and on slopes less than 5° (occupying 2.40% of the total forest area). The analysis also revealed a general trend of increasing forest cover with decreasing latitude and longitude, with peak forest coverage at mid-elevations and slopes, followed by a decline at higher elevations. The resultant forest map provides valuable data for ecological assessments, forest conservation initiatives, and informed policy decision-making.

Plant nitrogen (N), phosphorus (P), and potassium (K) concentrations and ratios serve as critical indicators of nutrient constraints in coastal ecosystems. However, the response of leaf–soil N-P-K stoichiometry in tropical coastal shelterbelt forests to seasonal rainfall variations remains poorly understood. This study measured total N, P, and K contents in leaves and soils of three typical tropical coastal shelterbelt forests in Wenchang, China—Casuarina equisetifolia L., Cocos nucifera L., and Pinus elliottii × caribaea—during August 2022 (wet season) and February 2023 (dry season). Key findings are as follows: (1) All three forests exhibited low N-P-K contents in both leaves and soils, with significant stand-specific variations. Soil N:P ratios were consistently below 14, indicating chronic N limitation for plant growth. (2) Wet seasons significantly altered leaf–soil N-P-K contents and stoichiometric ratios. (3) Leaf and soil stoichiometric traits exhibited strong correlations, but these relationships diverged under seasonal transitions. (4) Shifts from wet to dry seasons increased the sensitivity of N-P-K stoichiometric homeostasis, reflecting weakened nutrient buffering capacity. This study reveals stand-specific nutrient cycling patterns in tropical coastal shelterbelts, with seasonal rainfall modulating soil–leaf nutrient coupling and stoichiometric stability. These findings provide a theoretical basis for optimizing nutrient management and species configuration in tropical coastal ecosystems under climate variability.

This study proposes an Automatic Branch Modeling (ABM) framework that combines AdTree and AdQSM algorithms to reconstruct individual tree models and estimate timber volume from fused Hand-held Laser Scanners (HLS) and Unmanned Aerial Vehicle Laser Scanners (UAV-LS) point cloud data. The research focuses on two 50 × 50 m primary tropical rainforest plots in Hainan Island, China, characterized by dense and vertically stratified vegetation. Key steps include multi-source point cloud registration and noise removal, individual tree segmentation using the Comparative Shortest Path (CSP) algorithm, extraction of diameter at breast height (DBH) and tree height, and 3D reconstruction and volume estimation via cylindrical fitting and convex polyhedron decomposition. Results demonstrate high accuracy in parameter extraction, with DBH estimation achieving R² = 0.89–0.90, RMSE = 2.93–3.95 cm and RMSE% = 13.95–14.75%, while tree height estimation yielded R² = 0.89–0.94, RMSE = 1.26–1.81 m and RMSE% = 9.41–13.2%. Timber volume estimates showed strong agreement with binary volume models (R² = 0.90–0.94, RMSE = 0.10–0.18 m³, RMSE% = 32.33–34.65%), validated by concordance correlation coefficients (CCC) of 0.95–0.97. The fusion of HLS (ground-level trunk details) and UAV-LS (canopy structure) data significantly improved structural completeness, overcoming occlusion challenges in dense forests. This study highlights the efficacy of multi-source LiDAR fusion and 3D modeling for precise forest inventory in complex ecosystems. The ABM framework provides a scalable, non-destructive alternative to traditional methods, supporting carbon stock assessment and sustainable forest management in tropical rainforests. Future work should refine individual tree segmentation and wood-leaf separation to further enhance accuracy in heterogeneous environments.

Forest biomass, as a carrier of carbon, is an important indicator for judging forest productivity, stability and sustainable development capacity. Using the survey data of sample plots in eight forest areas in central Hainan, the biomass distribution of tropical mountain rainforests in National Park of Hainan Tropical Rainforest in different community sizes, diameter classes, altitudes and spaces was measured to explore the relationship between forest biomass and environmental factors. The results show that (1) the total area of tropical montane rainforests in National Park of Hainan Tropical Rainforest was about 983.70 km², distributed within an altitude range of 700–1300 m; the total aboveground biomass was about 25.208 million tons, which decreased first and then increased with increasing altitude, with an average aboveground biomass per unit area of 236.00 t·hm⁻²; (2) the primary forest accounted for 83.23% of the total aboveground biomass of the tropical mountain rainforest with only 29.84% of the total area, and the aboveground biomass per unit area was generally higher than that of the secondary forest; and (3) medium- and large-diameter trees were the main carriers of aboveground biomass in tropical mountain rain forests. More than 83.73% of the aboveground biomass was concentrated in large-diameter trees. The results of this study provide a reference for others aiming to perform measurement and evaluation of the carbon sink and the capacity for carbon neutrality in tropical rainforest ecosystems or to maintain regional biodiversity.