Transportation infrastructure is essential to a nation's everyday life and economic activity. Accordingly, pavement design and engineering are imperative to ensure safe, comfortable, and efficient transportation of goods, services, and people across countries. Pavements should be designed to be adaptable to changing traffic inputs and environmental conditions and always strive to fulfill the requirements of the end-users, including safety, durability, comfort, efficiency, sustainability, and cost. This review highlights innovations in paving technologies with a focus on sustainability from a socio-technical perspective; the scope is meant to be comprehensive but not exhaustive. The discussion categorizes paving design and technology innovations into two high-level sections: 1) high-volume urban pavement innovations and 2) low-volume rural pavement innovations.
The aim of this study was to better understand the differences between the effect of various Warm Mix Asphalt (WMA) additives on bitumen properties. For this purpose, the influence of two WMA additives (synthetic wax and cationic surfactant) have been studied on the physio-chemical and viscoelastic properties of a 70/100 pen paving grade bitumen. Changes in bitumen consistency resulting from bitumen modification were characterised using the conventional penetration and softening point tests as well as more advanced thermo-rheological measurements of complex shear stiffness modulus. Surface energy of the modified bitumen were characterised using the Dynamic Contact Angle (DCA) method based on the Wilhelmy Plate approach. The effect of WMA additives on bitumen consistency, rheology and surface energy was found to be additive-dependent. In general, typical concentration of synthetic wax (SW) caused elevated levels of bitumen consistency and total surface energy, while the manufacturer recommended dosages of cationic surfactant (CS) affected primarily the polarity of bitumen. SW increases the binder stiffness and is expected to result in bituminous mixtures with higher stiffness modulus. This is not expected from CS additive as it had nearly no effect on binder stiffness. Adding SW may reduce mixing and compaction temperatures by about 8°C. However, addition of CS is expected to result in a much lower decrease in mixing and compaction temperatures. Total surface energy profiles for the wax-modified bitumen remained constant, which was significantly lower than that of the pure bitumen. In contrast, CS had little influence on total surface energy. Addition of CS resulted in significant (> 5 times) decreases in polarity, which has implications for how bitumen bonds with certain aggregates and how the bitumen-aggregate moisture-damage susceptibility may be modified.
Pavement engineering has been increasingly challenged to provide safe, durable, and high-performing infrastructure while reducing the consumption of natural resources, energy use, greenhouse gas emissions, and waste generation