This paper investigates the current state of knowledge of the existing compaction testing methods for asphalt and identifies the limitations of these methods in using them during asphalt pavement compaction. Conventional spot tests that are carried out at limited spots for quality control (QC) and quality assurance (QA) of asphalt compaction often fail to ensure the uniformity of compaction. The differential approach using microwave sensors attached to the rollers can qualitatively indicate the optimum density during asphalt compaction; however, it requires spot density measurements to quantify the asphalt density achieved. intelligent compaction (IC) can be used to ensure the uniformity of asphalt compaction and to get real-time feedback. The current IC specifications for soil compaction are not suitable for asphalt compaction due to the viscoelastic nature of asphalt and the variation of asphalt mat temperature during compaction in the field. In addition, the state-of-the-art intelligent compaction measurement value (ICMVs) recorded during asphalt compaction does not correlate well with the asphalt density while it shows a reasonable correlation with asphalt stiffness. The effects of asphalt mat temperature and underlying support on ICMVs measured by IC rollers are identified as the potential causes of the poor correlation between ICMVs and spot density measurements. It is proposed that the relationship between asphalt modulus used in pavement designs and the ICMVs corrected for the effects of asphalt mat temperature and underlying support needs to be investigated in order to establish performance-based specifications for QA/QC of asphalt compaction. The emerging research on using GPR for asphalt density estimation is examined and the factors that affect the GPR measurements during asphalt pavement compaction are identified .
16 May 2022 in International Journal of Pavement Engineering
This paper presents a novel equation (named the ‘STKAR equation’) to predict the average in-depth temperature of asphalt layers in real-time during compaction using the measured surface temperature and the estimated temperature gradient at the asphalt surface. The motivation for the development of this method is the fact that the asphalt surface temperature measured during asphalt compaction using infrared radiation (IR) sensors mounted on state-of-the-art intelligent compaction (IC) rollers does not represent the average temperature in the asphalt layer, which governs its mechanical properties. Further, current asphalt temperature prediction models require the elapsed time since asphalt paving to predict the in-depth temperature of the asphalt layer during compaction. However, the measurement of elapsed time for each spot on the asphalt layer during compaction has practical difficulties in the field. In this study, the STKAR equation was derived from the 1-D diffusion equation for the cooling process of a newly-laid hot asphalt layer during compaction in the field. The developed equation was validated using the temperature data obtained during the construction of a two-layer asphalt testbed in the field. The in-depth temperatures predicted using the STKAR equation showed excellent agreement with the in-depth temperatures measured in asphalt layers during compaction. Further, numerical simulations were carried out to examine the applicability of the STKAR equation to different field scenarios. The numerical results showed that the initial temperature of the asphalt mix, the thermal conductivity of the underlying support material and the initial temperature of the underlying support significantly affect the in-depth temperature profile of asphalt layers, while asphalt density and asphalt specific heat content have negligible effects on the in-depth temperature profile. The STKAR equation was further refined by incorporating the factors which affect the in-depth temperature profile of asphalt layers during compaction.
16 August 2023 in International Journal of Fatigue
Foamed bitumen stabilisation of road pavements has become popular in recent times as this technique provides cost-effective, eco–friendly and less moisture susceptible road pavements. The most common failure mechanism of foamed bitumen stabilised (FBS) materials in the Australian context has been identified as the bottom-up fatigue cracking, and the flexural fatigue life of FBS materials is currently predicted using the fatigue relationship of asphalt. However, the asphalt fatigue relationship may not be entirely valid for FBS materials due to the differences in material characteristics. With a view to develop a rigorous design approach for FBS pavements, this study investigates the flexural fatigue behaviour of FBS mixtures at different temperatures (11°C, 22°C and 31°C) bitumen contents (2%, 3% and 4%), secondary binders (cement at 2% and hydrated lime at 2% and 4%), densities (2.14 kg/m3, 2.20 kg/m3 and 2.26 kg/m3) and moisture contents (dry and 90% saturation). The experimental results showed that the flexural fatigue life of the FBS beams increases with increasing density and bitumen content while it decreases with increasing temperature and moisture content. The flexural fatigue life of 3% bitumen and 2% lime FBS mixture under strain-controlled mode was found to be around 21 times higher than that under stress-controlled mode for a given initial flexural strain. Based on the experimental results, suitable analytical models were developed for the prediction of the flexural fatigue life of FBS mixtures under both stress-controlled and strain-controlled modes taking into account the variations in temperature, bitumen content, moisture content and density of the FBS mixtures.
Foamed bitumen stabilization offers a sustainable solution for the construction of new pavements or rehabilitation treatments while also improving the performance of pavement structures. This technique allows up to 100 % of the existing pavements to be used, which will lead to lower use of quarry resources and reduced material transportation cost. In recent years, there have been advances in the use of foamed bitumen stabilized (FBS) pavements. However, prior to the research in this paper, no specific Australian performance relationship had been developed for FBS materials. Also, there was a lack of test procedures specifically developed to manufacture and evaluate the fatigue cracking resistance of FBS conventional and recycled pavement materials. This paper presents the laboratory characterization and development of a fatigue relationship to predict performance of FBS materials. For this purpose, laboratory experiments were undertaken including flexural fatigue, modulus, and strength tests using a four-point bending beam system. Five different host materials were selected for laboratory investigations, including three crushed rocks and two recycled blends incorporating 50 % reclaimed asphalt pavement and 80 % recycled cement–treated crushed rock. A total of eight FBS mixes were tested with varying host materials, foamed bitumen content from 2 to 4 %, and hydrated lime content of 1 or 2 %. A testing procedure to measure and analyze the fatigue performance of FBS granular base and recycled blends was produced. Using the laboratory test results, a specific laboratory fatigue relationship for FBS materials, including recycled blends, is developed. The flexural modulus, flexural strength-to-modulus ratio, and volume of bitumen were found to be major parameters affecting the fatigue life of FBS materials and were consequently employed to develop the predictive model. This research will assist with the subsequent development of a performance-based in-service fatigue model for thickness design of FBS flexible pavements.