Parameters of strength of isotropic high-density graphite are thought to be strongly correlated to pore structure of the graphite from experimental results on fracture toughness. Until now the pore structure has not been analyzed quantitatively, and the relation between the parameters of strength and the pore structure has not been explained clearly. In the present paper, pore structure of the isotropic graphite has been analyzed by means of a polarizing microscope combined with an image analyzer. The polarizing microscope images of the isotropic graphite are digitized using an image scanner. Distribution of area size, number, circularity, and fractal dimension of cross-section of the pores are measured, and are analyzed quantitatively. When there is an increase in the number of small pores, the elastic modulus and bending strength also increase. We believe that a structure which includes many pores increases plane strain fracture toughness (KIC) and critical crack opening displacement (CODf), because crack propagation can be inhibited by the pores.
17 January 2022 in Journal of Physics and Chemistry of Solids
High-purity alumina is an important industrial material, yet its production typically relies on chemically and energy-intensive processing. Direct aqueous conversion of aluminum could simplify this pathway, but the native oxide barrier suppresses the reaction. Here, we show that negatively charged cellulose nanofibrils (NCCNF) engineer the aluminum–water interface, enabling direct conversion of aluminum to high-purity nano-bayerite and, subsequently, nano-alumina. Aluminum powder with a median particle size of a few tens of micrometers was converted to nanosized bayerite with 99.9976% purity in deionized water containing 0.1–0.5 wt% NCCNF within 5 h at 55 °C. Calcination at 1250 °C produced 99.9957% phase-pure α-Al₂O₃ with controlled nanoscale morphologies. NCCNF establishes a hydrated, negatively charged interfacial environment that promotes breakdown of the passive oxide and facilitates sustained aluminum oxidation and bayerite formation. This approach transforms a passivation-limited metal–water reaction into a direct conversion process using a bio-derived interfacial regulator.