Pyrolysis is an energy recovery technique with significant potential for managing wastewater treatment plant byproducts. This research aims to investigate the physicochemical and thermal properties of Moroccan sludge, as well as the behavior of its decomposition during pyrolysis at three different heating speeds (5, 10, and 20 K/min). Characterization of the sludge before pyrolysis through ultimate analysis, proximate analysis, FTIR spectroscopy, and XRD revealed that the sludge consists predominantly of organic matter, with a volatile matter rate of 48%, an ash rate of 37%, and a higher heating value (HHV) of 15 MJ/kg. The TGA-DTG curves identified four distinct stages in the sludge decomposition process: drying, decomposition of organic matter, degradation of calcium carbonate, and decomposition of inorganic matter. Using TG-MS analysis, the principal gases identified during pyrolysis were H₂O, H₂, CH₄, CO₂, CO, NO, and SO. The average activation energies (E_a) determined through kinetics models were found to be 413.4 kJ/mol for the Kissinger–Akahira–Sunose (KAS) model, 419.6 kJ/mol for the Flynn–Wall–Ozawa (FWO) model, and 416.3 kJ/mol for the Starink model. The values of E_a and the pre-exponential coefficient (A) obtained through the KAS, FWO, and Starink techniques are consistent with ΔG values ranging between 152 and 155 KJ/mol. The positive ΔS values range from 0.003 to 1.415 kJ/mol.K, indicating the complexity of the sludge response during pyrolysis and the spontaneity of the chemical reaction at high temperatures. The kinetic data obtained serves as a pillar for the development and improvement of sewage sludge pyrolysis systems, reinforcing their role in sustainable energy production.

A biomaterial that is both bioactive and capable of controlled drug release is highly attractive for bone regeneration. In previous works, we demonstrated the possibility of combining activated carbon fiber cloth (ACC) and biomimetic apatite (such as calcium-deficient hydroxyapatite (CDA)) to develop an efficient material for bone regeneration. The aim to use the adsorption properties of an activated carbon/biomimetic apatite composite to synthetize a biomaterial to be used as a controlled drug release system after implantation. The adsorption and desorption of tetracycline and aspirin were first investigated in the ACC and CDA components and then on ACC/CDA composite. The results showed that drug adsorption and release are dependent on the adsorbent material and the drug polarity/hydrophilicity, leading to two distinct modes of drug adsorption and release. Consequently, a double adsorption approach was successfully performed, leading to a multifunctional and innovative ACC-aspirin/CDA-tetracycline implantable biomaterial. In a second step, in vitro tests emphasized a better affinity of the drug (tetracycline or aspirin)-loaded ACC/CDA materials towards human primary osteoblast viability and proliferation. Then, in vivo experiments on a large cortical bone defect in rats was carried out to test biocompatibility and bone regeneration ability. Data clearly highlighted a significant acceleration of bone reconstruction in the presence of the ACC/CDA patch. The ability of the aspirin-loaded ACC/CDA material to release the drug in situ for improving bone healing was also underlined, as a proof of concept. This work highlights the possibility of bone patches with controlled (multi)drug release features being used for bone tissue repair.

Calcium phosphate and derivatives have been known for decades as bone compatible biomaterials. In this work, the chemical composition, microtexture, and structure of calcium phosphate deposits on carbon cloths were investigated. Three main types of deposits, obtained through variation of current density in using the sono-electrodeposition technique, were elaborated. At low current densities, the deposit consists in a biomimetic, plate-like, carbonated calcium-deficient hydroxyapatite (CDA), likely resulting from the in situ hydrolysis of plate-like octacalcium phosphate (OCP), while at higher current densities the synthesis leads to a needle-like carbonated CDA. At intermediate current densities, a mixture of plate-like and needle-like carbonated CDA is deposited. This established that sono-electrodeposition is a versatile process that allows the coating of the carbon scaffold with biomimetic calcium phosphate while tuning the morphology and chemical composition of the deposited particles, thereby bringing new insights in the development of new biomaterials for bone repair.

Critical bone defect repair remains a major medical challenge. Developing biocompatible materials with bone-healing ability is a key field of research, and calcium-deficient apatites (CDA) are appealing bioactive candidates. We previously described a method to cover activated carbon cloths (ACC) with CDA or strontium-doped CDA coatings to generate bone patches. Our previous study in rats revealed that apposition of ACC or ACC/CDA patches on cortical bone defects accelerated bone repair in the short term. This study aimed to analyze in the medium term the reconstruction of cortical bone in the presence of ACC/CDA or ACC/10Sr-CDA patches corresponding to 6 at.% of strontium substitution. It also aimed to examine the behavior of these cloths in the medium and long term, in situ and at distance. Our results at day 26 confirm the particular efficacy of strontium-doped patches on bone reconstruction, leading to new thick bone with high bone quality as quantified by Raman microspectroscopy. At 6 months the biocompatibility and complete osteointegration of these carbon cloths and the absence of micrometric carbon debris, either out of the implantation site or within peripheral organs, was confirmed. These results demonstrate that these composite carbon patches are promising biomaterials to accelerate bone reconstruction.