Seismic imaging in areas with complex geological structures, such as steeply dipping strata and lateral velocity variations, remains a significant challenge in geophysical exploration. In this paper, a Kirchhoff pre-stack depth and pre-stack time migration imaging method under the constraint of an initial model is proposed. By establishing the initial velocity model, the method is iteratively optimized under the horizon constraint, and the travel time difference is used to update the model. Finally, Kirchhoff pre-stack imaging is realized. Numerical simulations using a synthetic five-layer velocity model demonstrate that removing direct wave interference and incorporating horizon constraints significantly improve the signal-to-noise ratio and structural accuracy of the migration results. A field case study in a coalfield with monoclinic structures and high-angle faults further validates the method’s effectiveness. Comparative analysis with pre-stack time migration reveals that Kirchhoff pre-stack depth migration achieves superior fault delineation, diffraction wave homing, and event continuity, particularly in steeply dipping formations. The results highlight the method’s potential for improving seismic interpretation accuracy in complex structural settings, offering practical value for coal mine safety and resource exploration.
Channel wave seismic activity often occurs with thin and medium-thick coal seams being the main target layer. To address the problem of channel wave applicability detection in extremely thick coal seams, the propagation and identification characteristics of channel waves remain the focus of research. Therefore, this paper takes the in-seam wave exploration of a 27 m extremely thick coal seam as an example and uses the staggered mesh finite difference method to construct a three-dimensional medium model for numerical simulation. An analysis of the physical parameters of coal and rock, along with the dispersion characteristics of channel waves in extra-thick coal seams, is utilized, through the Zoeppritz equation and the total reflection propagation method, to calculate the imaging. We found the following: (1) The dispersion areas and weak dispersion areas along the detection direction are extremely thick coal seams. (2) There are apparent channel waves in extra-thick coal seams, with a waveform similar to body waves; the length of the wave train is shorter than that of the conventional channel wave, and the arrival time can be estimated accurately. The amplitude of the apparent channel wave is affected by the degree of dispersion, with lower attenuation and higher resolution. The characteristic of total reflection in extremely thick coal seams is that the incident angle is equal to the critical angle, and the dispersion characteristics are weak. (3) The channel waves with weak dispersion characteristics in extra-thick coal seams are mainly Love-type waves.
1 January 2022 in Earth Science-Journal of China University of Geosciences
The Qaidam Basin, on the northeastern margin of the Tibetan Plateau, preserves abundant evaporite resources and provides a key archive for investigating basin evolution, climatic change, and brine mineralization. In the Dalangtan area of the northwestern basin, a thick Cenozoic gravelly succession has recently been recognized as the principal host of a newly identified gravel-type potash-bearing brine deposit. Here, we present detailed rock-magnetic and magnetostratigraphic results from borehole CJ-3 to constrain the Late Cenozoic sedimentary evolution of the Altyn Tagh piedmont and its relationship to potash-bearing brine reservoir development. The magnetic polarity sequence consists of 12 pairs of normal and reversed zones, which can be correlated with subchrons C2An.2n–C3r of the geomagnetic polarity timescale (GPTS 2012). A major sedimentary facies shift at 370.75 m yields an age of 3.08 Ma, indicating the onset of a high-energy piedmont alluvial-fan depositional system. This transition was primarily driven by intensified tectonic activity along the Altyn Tagh fault during the Late Pliocene, whereas increasing regional aridity favored the accumulation and preservation of coarse clastic sediments. This age further constrains the initial development of the principal sand–gravel brine reservoir in the Dalangtan area to the latest Pliocene, providing a new chronological basis for understanding sand–gravel-type potash-bearing brine reservoir formation in the northwestern Qaidam Basin.