Seismic imaging in areas with complex geological structures, such as steeply dipping strata and lateral velocity variations, remains a significant challenge in geophysical exploration. In this paper, a Kirchhoff pre-stack depth and pre-stack time migration imaging method under the constraint of an initial model is proposed. By establishing the initial velocity model, the method is iteratively optimized under the horizon constraint, and the travel time difference is used to update the model. Finally, Kirchhoff pre-stack imaging is realized. Numerical simulations using a synthetic five-layer velocity model demonstrate that removing direct wave interference and incorporating horizon constraints significantly improve the signal-to-noise ratio and structural accuracy of the migration results. A field case study in a coalfield with monoclinic structures and high-angle faults further validates the method’s effectiveness. Comparative analysis with pre-stack time migration reveals that Kirchhoff pre-stack depth migration achieves superior fault delineation, diffraction wave homing, and event continuity, particularly in steeply dipping formations. The results highlight the method’s potential for improving seismic interpretation accuracy in complex structural settings, offering practical value for coal mine safety and resource exploration.
This study compares the effectiveness of different methods for coal thickness identification, aiming to identify the most accurate approach and provide a reference for intelligent coalmine development. Focused on the No. 2 coal seam in a mining area in Shanxi, China, the analysis employs well log-constrained impedance inversion and seismic multi-attribute techniques. The results show that the back propagation (BP) neural network model, as part of the seismic multi-attribute approach, delivers prediction accuracy comparable to the well log-constrained inversion method. Specifically, after applying proper static corrections, a four-layer BP neural network was constructed using four optimized sensitive attributes as the input layer, achieving an error range of 0.11% to 1.36%, compared to 0.03% to 6.59% for the logging-based method. The BP neural network demonstrated strong applicability in complex geological environments. Empirical analysis further validated the BP neural network’s geological reliability and practicality in systematic coal thickness determination.
To study the influence of coal mining on the water richness overlying strata in the mining area using time-lapse electrical monitoring technology, four dataset acquisitions were completed with the same acquisition method, equipment, parameters, and processing flow. According to the characteristics of the data, major problems such as topographic correction, high-precision denoising, spatial and temporal normalization, and resistivity data inversion have been solved. Precise tomographic imaging was achieved through high-precision data processing and difference inversion. The results show that the electrical stratification characteristics of the overlying soil and rock layers are clear, the resistivity from the surface down gradually increases, and the electrical layers are not uniform locally. During mining, the overlying strata are affected by mining, the electrical resistivity of the underlying aquifers increased to varying degrees, and the fluctuation of electrical resistivity increased while the aquifer’s water content decreased. After mining, the overlying aquifer has the phenomenon of ‘reduced resistivity and water recovery’. After a period of time, the overlying soil disturbance and overlying rock failure zone will gradually tend to be stable. Meanwhile, the aquifer structure and water content will also gradually recover. Our results could provide guidance for water resources protection in this region.
Accurate fault identification in coal mines is important to improve mine safety and economic benefits. We compare various intelligent algorithms for data preprocessing and optimization and analyze the construction methods of seismic attribute data sets and the performance of intelligent optimization algorithms using fault identification accuracy as the discrimination index to find a better combined model for seismic fault identification. First, the training data set is constructed by mining the fault and nonfault information revealed by the roadway. The distribution characteristics of the seismic attribute data indicate similarities among them, and they are nonlinearly separable. Directly using the attributes to construct the data set, the accuracy of fault identification using the support vector machine (SVM) model is 78.41%. Principal component analysis (PCA) and self-organizing mapping (SOM) neural networks are used to extract effective information and then combined with the SVM classification model, and the accuracy of fault identification is 83.82% and 87.47%, respectively. Compared with the original data and PCA dimensionality reduction data, the accuracy of fault detection is improved by 9.06% and 3.66%, respectively, indicating that SOM can effectively improve the accuracy of fault detection by eliminating similar attributes and reducing the weight of redundant information. Then, through a fixed attribute data set, genetic algorithm (GA), particle swarm optimization (PSO), and gray wolf optimizer (GWO) intelligent optimization algorithms are used to find the optimal kernel function parameter and penalty parameter of the SVM classifier. The accuracy rate of the SOM-GWO-SVM model reaches 91.12%, compared with the SOM-PSO-SVM and SOM-GA-SVM, and the model accuracy is increased by 5.2% and 5.61%, respectively. Compared with PSO and GA, the GWO algorithm has a better global search ability. The identification result of the SOM-GWO-SVM model is closest to the actual fault exposure, especially for the identification of “short” faults and associated faults, which has obvious advantages over the traditional manual interpretation in terms of efficiency and accuracy.
Tunnel ahead prospecting is important for reducing construction risks associated with faults, fractured zones, and cavities ahead of the tunnel face, but controlled active-source surveys are often impractical during continuous TBM operation. TBM drilling-noise records provide persistent passive excitation; however, strong nonstationarity and narrowband tonal contamination can hinder stable retrieval of interpretable impulse-like responses. We propose an adaptive impulse reconstruction algorithm that couples CEEMDAN-based mode screening with MDD interferometry. CEEMDAN screening suppresses quasi-stationary tonal components while preserving coherent propagation-related wavefields, producing effective signals suitable for interferometric processing. The MDD stage is stabilized using band-limited inversion, phase-only whitening, and a multi-reference strategy. Numerical experiments with a 3D elastic tunnel model indicate that the proposed workflow yields a more compact and laterally coherent virtual-source gather than correlation-based baselines (CC and PHAT-CC) and single-reference deconvolution interferometry, supporting reflection-oriented interpretation beyond simple wavelet compression. Field measurements from an operating TBM tunnel, together with a hammer-impact benchmark, are consistent with the feasibility of the workflow under real tunneling conditions and with physically plausible moveout behavior in the reconstructed gathers.