When the channel wave passes through the abnormal body, the dispersion curve appears interval, dislocation, and discontinuity, resulting in the non-standard and large error of the “velocity-frequency” pickup result of the transmitted channel wave dispersion curve, which directly leads to the inaccurate tomography. Therefore, aiming at this problem, the imaging method of dispersion curve variability function is proposed: (1) count the breakpoints of dispersion curve according to three types; (2) set the weighting factor for the breakpoint according to the spectrum curve; (3) the variability function is constructed for the dispersion curve, and the corresponding variation value is obtained; and (4) the variability value is back projected into the imaging grid space to obtain the abnormal body information in the detection area. The example verification results show that the imaging results of this method are accurate and stable, and non-convergence is caused by cyclic iteration, which provides a new imaging mode for the detection of complex structures in coal seams.
This study compares the effectiveness of different methods for coal thickness identification, aiming to identify the most accurate approach and provide a reference for intelligent coalmine development. Focused on the No. 2 coal seam in a mining area in Shanxi, China, the analysis employs well log-constrained impedance inversion and seismic multi-attribute techniques. The results show that the back propagation (BP) neural network model, as part of the seismic multi-attribute approach, delivers prediction accuracy comparable to the well log-constrained inversion method. Specifically, after applying proper static corrections, a four-layer BP neural network was constructed using four optimized sensitive attributes as the input layer, achieving an error range of 0.11% to 1.36%, compared to 0.03% to 6.59% for the logging-based method. The BP neural network demonstrated strong applicability in complex geological environments. Empirical analysis further validated the BP neural network’s geological reliability and practicality in systematic coal thickness determination.
Existing goaves (e.g., shafts and roadways) in mines represent important hidden dangers during the production of underlying coal seams. In this view, the accurate identification, analysis, and delimitation of the scope of goaves have become important in the 3D seismic exploration of mines. In particular, an accurate identification of the boundary swing position of goaves for 3D seismic data volumes within a certain depth interval is key and difficult at the same time. Here, a wide-band and wide-azimuth observation system was used to obtain high-resolution 3D seismic data. The complex structure of a mine was analyzed, and a seismic double processing system was applied to verify the fine processing effect of a goaf and improve the resolution of the 3D seismic data. Based on the seismic attribute identification characteristics of the goaf structure, we decided to adopt multi-attribute comprehensive identification and data fusion technologies to accurately determine the position of the goaf and of its boundary. Combining this information with the mine roadway engineering layout, we verified the accurateness and correctness of the goaf boundary location. Our study provides a good example of the accurate identification of the 3D seismic data of a roadway goaf.
The quantitative detection of faults using the channel wave seismic method has been a major but challenging area of interest. In this study, we adopted an effective technical process to evaluate fault attribution. First, we use integrated transmission and reflection channel wave information to improve the accuracy of extraction velocity. Then, the location of the fault is determined by the elliptical tangent offset method, and feature extraction and fault location extension determination are achieved through logistic regression and a neural network. This is combined with the prior geological information, the fractional dimension D to the quantitative analysis of the fault throw. Data regarding the 4203 working face of a mine in Shanxi, China, are considered as an example. Two groups of faults were predicted, with the location error in the f30 fault position as 6.7 m. In addition, the f29 fault throw first increased, and then gradually decreased from the return airway to the haulage gateway. These predicted results have been drill-verified and were used to modify the original design. The proposed method has good stability and promising application prospects for fault evaluation.
Mining frequency converters are the primary means for achieving variable frequency speed regulation of electromechanical equipment in coal mines, offering energy-saving benefits for coal mining enterprises. The common power supply method involves converting high voltage to low voltage using power frequency transformers before supplying equipment. However, this integration of power frequency transformers with supply devices occupies significant space, making it unsuitable for confined underground environments. Additionally, they suffer from poor output waveform quality and high harmonic content. To tackle these challenges, this paper presents a three-stage topology for high-frequency isolated frequency conversion and speed regulation, utilizing three-phase uncontrolled rectification, a single active isolated DC/DC converter, and an NPC three-level inverter. The control strategies for each stage are discussed in detail. Simulations and experimental results confirm the validity and feasibility of the proposed design, demonstrating enhanced stability and dynamic performance of the three-stage high-frequency isolated frequency converter.
Channel wave seismic activity often occurs with thin and medium-thick coal seams being the main target layer. To address the problem of channel wave applicability detection in extremely thick coal seams, the propagation and identification characteristics of channel waves remain the focus of research. Therefore, this paper takes the in-seam wave exploration of a 27 m extremely thick coal seam as an example and uses the staggered mesh finite difference method to construct a three-dimensional medium model for numerical simulation. An analysis of the physical parameters of coal and rock, along with the dispersion characteristics of channel waves in extra-thick coal seams, is utilized, through the Zoeppritz equation and the total reflection propagation method, to calculate the imaging. We found the following: (1) The dispersion areas and weak dispersion areas along the detection direction are extremely thick coal seams. (2) There are apparent channel waves in extra-thick coal seams, with a waveform similar to body waves; the length of the wave train is shorter than that of the conventional channel wave, and the arrival time can be estimated accurately. The amplitude of the apparent channel wave is affected by the degree of dispersion, with lower attenuation and higher resolution. The characteristic of total reflection in extremely thick coal seams is that the incident angle is equal to the critical angle, and the dispersion characteristics are weak. (3) The channel waves with weak dispersion characteristics in extra-thick coal seams are mainly Love-type waves.