Sulfur dioxide, carbon disulfide, and hydrogen sulfide are important decomposition products of insulating gas sulfur hexafluoride, and their types and contents are of great significance for the fault diagnosis of SF 6 insulated equipment. In this paper, a method of combining ultraviolet absorption spectroscopy and least squares fitting is proposed for the quantitative calculation of sulfur dioxide, carbon disulfide, and hydrogen sulfide mixed gases. All three gases have absorption peaks in the ultraviolet band and they overlap with each other which makes it hard to determinate the concentrations of the three gases directly. During the experiment, we found that high concentrations of sulfur dioxide and carbon disulfide interfered with the hydrogen sulfide calculation and the magnitude of this interference was positively correlated with these two gas concentrations. Therefore, we found a modified equation for the correction of hydrogen sulfide. Combined with this equation, accurate quantitative detection of three gases can be achieved. The detection ranges are 0.5–10 parts per million for sulfur dioxide and hydrogen sulfide, and 10–300 parts per billion for carbon disulfide. This paper provides a simple and efficient detection method, which is convenient for integration into detection equipment and it provides a support method for the diagnosis of sulfur hexafluoride decomposition gases.
A similarity criterion suitable for studying the vibration characteristics of converter transformers is proposed based on comprehensive consideration of geometric dimensions, electric field, magnetic field, force field, sound field, and coupling field interface interactions. By comparing the magnetic field, stress, displacement, sound field distribution, and vibration characteristics of the scale model of the converter transformer with the initial model, the reliability of the similarity criterion was determined. Based on the vibration similarity criterion of the converter transformer, a prototype of the proportional model was designed and manufactured, and vibration signals under no-load and load conditions were tested. These signals correspond to the vibration signals of the iron core and winding in the finite element model, respectively. Through comparative analysis, the reliability of the prototype and the vibration similarity model of the converter transformer has been proven, which can provide an accurate and effective laboratory research platform for in-depth research on the vibration and noise of the converter transformer and equipment protection.