Jiawei Wang

Prof. Dr. Jiawei Wang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 October 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
CYChunyuan Yang
Chunyuan Yang
JWJiawei Wang
Jiawei Wang
PYPan Yang
Pan Yang
YHYue He
Yue He
SWSong Wang
Song Wang
HWHaifeng Wang
Haifeng Wang
The recovery of valuable metals from spent lithium-ion batteries is beneficial to protect the environment and avoid resource depletion. Based on the synergistic effect of the reducing ability of oxalic acid and the acidic strength of sulfuric acid, this study was conducted to recover valuable metals from spent LiNi0.8Co0.1Mn0.1O2 lithium-ion battery cathode materials with the compound leaching agents of sulfuric acid and oxalic acid. Under the optimized conditions of sulfuric acid concentration at 2.5 mol·L−1, oxalic acid concentration at 20 g·L−1, liquid-to-solid ratio at 10 mL·g−1, reaction temperature at 85 °C, and reaction time at 100 min, the leaching rate of Li, Ni, Co, and Mn measured by ICP-OES was, respectively, 99.26%, 98.41%, 96.95%, and 97.54%. It was further validated that the valuable metals were almost completely leached when combined with the XRD and SEM-EDS analysis of spent cathode materials before and after leaching. The leaching of Li, Ni, Co, and Mn was all in accordance with the Avrami model with their activation energies of 31.96 kJ·mol−1, 41.01 kJ·mol−1, 47.57 kJ·mol−1, and 42.95 kJ·mol−1, indicating that the diffusion was the control of the Li leaching process, and the surface chemical reaction was the control of the other three metals. This work provides a new idea and method for the recycling of spent lithium-ion batteries.

25 October 2023 in Molecules
Verified
Journal Article
Open access
PDF file
XDXinyu Dong
Xinyu Dong
HWHaifeng Wang
Haifeng Wang
JWJiawei Wang
Jiawei Wang
QWQian Wang
Qian Wang
HWHao Wang
Hao Wang
FLFanghai Lu
Fanghai Lu
Sodium-ion batteries have important application prospects in large-scale energy storage due to their advantages, such as safety, affordability, and abundant resources. Prussian blue analogs (PBAs) have a stable and open framework structure, making them a very promising cathode material. However, high-performance manganese-based Prussian blue cathode materials for sodium-ion batteries still suffer from significant challenges due to several key issues, such as a high number of vacancy defects and a high crystal water content. This article investigates the effects of the Fe-Mn molar ratio, Mn ion concentration, and reaction time on the electrochemical performance of MnHCF during the coprecipitation process. When Fe:Mn = 1:2, c(Mn2+) = 0.02 mol/L, and the reaction time is 12 h, the content of interstitial water molecules in the sample is low, and the Fe(CN)6 defects are few. At 0.1 C, the prepared electrode has a high initial discharge specific capacity (121.9 mAh g−1), and after 100 cycles at 0.2 C, the capacity retention rate is 65% (~76.2 mAh g−1). Meanwhile, the sample electrode exhibits excellent reversibility. The discharge capacity can still be maintained at around 75% when the magnification is restored from 5 C to 0.1 C. The improvement in performance is mainly attributed to two aspects: On the one hand, reducing the Fe(CN)6 defects and crystal water content is conducive to the diffusion and stable structure of N. On the other hand, reducing the reaction rate can significantly delay the crystallization of materials and optimize the nucleation process.

Verified
Journal Article
Open access
PDF file
ZPZhengqing Pei
Zhengqing Pei
JWJiawei Wang
Jiawei Wang
HWHaifeng Wang
Haifeng Wang
可郑可欣 郑
可欣 郑
QWQian Wang
Qian Wang
JLJu Lu
Ju Lu
LiMn2O4, a significant cathode material for lithium-ion batteries, has garnered considerable attention due to its low cost and environmental friendliness. However, its widespread application is constrained by its rapid capacity degradation and short cycle life at elevated temperatures. To enhance the electrochemical performance of LiMn2O4, we employed a liquid-phase co-precipitation and calcination method to incorporate Cr3+ into the LiMn2O4 cathode material, successfully synthesizing a series of LiCrxMn2−xO4 (x = 0~0.06). The prepared Cr-doped samples exhibited an excellent spinel structure and a unique truncated octahedral morphology. Additionally, the substitution of Mn3+ in LiMn2O4 by Cr3+, coupled with the significantly higher Cr-O bond energy compared to Mn-O bond energy, enhanced the stability of the crystal structure and inhibited the Jahn–Teller effect. Experimental results demonstrated that the optimized LiCr0.04Mn1.96O4 displayed superior electrochemical performance, with a capacity retention rate of 93.24% after 500 cycles under a 0.5C current density; even at 50 °C, the capacity retention rate remained at 86.46% after 350 cycles under a 0.5C current density. The polyhedral morphology formed by Cr doping in LiMn2O4 offers an effective approach to achieving high-performance LiMn2O4 cathode materials.

12 December 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
可郑可欣 郑
可欣 郑
JWJiawei Wang
Jiawei Wang
HWHaifeng Wang
Haifeng Wang
ZPZhengqing Pei
Zhengqing Pei
QWQian Wang
Qian Wang
JLJu Lu
Ju Lu
The P2-Na0.7MnO2.05 cathode material has long been constrained by phase transitions induced by the Jahn–Teller (J–T) effect during charge–discharge cycles, leading to suboptimal electrochemical performance. In this study, we employed a liquid phase co-precipitation method to incorporate Ti during the precursor Mn3O4 synthesis, followed by calcination to obtain Na0.7TixMn(1−x)O2.05 materials. We investigated the effects of Ti doping on the structure, morphology, Mn3+ concentration, and Na+ diffusion coefficients of Na0.7TixMn(1−x)O2.05. Our findings revealed that the 7% Ti-doped NTMO-007 sample exhibited reduced grain agglomeration and smaller particle sizes compared to the undoped sample, thereby enhancing the electrode–electrolyte contact area and electrochemical activity. Additionally, Ti doping increased the crystal cell volume of Na0.7MnO2.05 and broadened the Na+ transport channels, significantly enhancing the Na+ diffusion coefficient. At a 0.5 C rate, the NTMO-007 sample demonstrated a specific capacity of 143.3 mAh g−1 with an 81.8% capacity retention after 100 cycles, markedly outperforming the undoped NMO sample, which had a capacity retention of only 61.5%.

31 August 2023 in Nanoscale Advances
Verified
Journal Article
Open access
PDF file
XDXinyu Dong
Xinyu Dong
HWHaifeng Wang
Haifeng Wang
JWJiawei Wang
Jiawei Wang
YHYue He
Yue He
PYPan Yang
Pan Yang
FLFanghai Lu
Fanghai Lu
Three different crystalline forms of Mn 3 O 4 were successfully prepared by a liquid phase method with different additives.

1 February 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
HWHaifeng Wang
Haifeng Wang
XYXiaoyu You
Xiaoyu You
JTJiayu Tian
Jiayu Tian
XCXiaoliang Cheng
Xiaoliang Cheng
JWJiawei Wang
Jiawei Wang
Phosphogypsum has poor cementitious activity, which hinders its large consumption in the field of building materials. By studying the phase and microstructure of phosphogypsum pretreated by alkali activation, and the compressive strength, and microstructure of the non-sintering building materials prepared with the high content phosphogypsum, the process parameters of preparing high content and high compressive strength non-burning building materials with phosphogypsum were obtained. The result showed that, when 100 g phosphogypsum was added with 200 mL activator, after 24 hours of excitation under room temperature, the main crystalline phase CaSO4·2H2O of phosphogypsum have smaller grains and lower crystallinity. Microstructure analysis showed that the particles of tabular phosphogypsum were powdered, and the original plate-like crystal form became smaller plates. Thus, its gelation activity was improved. When the content of phosphogypsum was 80%, the compressive strength of non-burning building materials after maintenance for 7 days, 28 days and after immersion in water for 24h were 15.13 MPa, 16.4 MPa and 11.8 MPa, respectively. The micro morphology showed that the particle size gradient was appropriate and the density was very high, which was very beneficial to improve the strength of the material.