In this study, water consumption predictions are made based on data obtained from two copper mineral concentration plants located in the northern region of Chile, Antofagasta Region, measured during a year of mining operation. The area to which this operation belongs is characterized by a desert climate with average annual rainfall of less than 50 mm and maximum and minimum temperatures of 29 °C and 4 °C for summer, and 26 °C and −5 °C for winter, measured during 2022. To perform the predictions, a database corresponding to two concentration plants with daily measurements for a year was used, which were analyzed using four regression models using Machine Learning (ML) in Python: Support Vector Regressor (SVR), Extreme Gradient Boost (XGBoost), Artificial Neural Network (ANN), and Random Forest Regressor (RF). The predictions obtained by each of the ML models were studied using cross-validation hyperparameter tuning and identifying the variable with the greatest impact. The model with the best prediction results was ANN, as it yielded the lowest relative error in the predictions.
The growing production of lithium-ion batteries is leading to an increase in waste, which contains elements considered critical in industry, like cobalt, manganese and nickel. Urban mining offers an opportunity to recover these elements and reintroduce them into the value chain. This study aimed to detect and recover metals of interest present in discarded lithium-ion batteries and determine the influence of flotation operating parameters on the recovery of the detected elements through an experimental design. The batteries subjected to the flotation experiments were obtained from various types of common disused mobile devices. They were dismantled by separating the copper sheets from the anode and the aluminum sheets from the cathode, to be subjected to a comminution process and elemental composition analysis using X-ray fluorescence. Only the cathode components were subjected to flotation. The flotation process was carried out by controlling the level of agitation and aeration and the flotation time using an automated flotation cell. The experiments were configured in a 23 experimental design. Average recoveries of approximately 67% for cobalt, 64% for manganese, and 63% for nickel were achieved at a pH of 12.5 and a pulp density of 3.33 g/L using MIBC as the sole reagent. Statistical analysis at a 95% confidence level identified agitation, aeration, and flotation time both individually and in combination as significant factors. Linear models were developed to predict metal recovery, showing good agreement with experimental data (errors < 10%; standard deviation < 3%).