The connection between an intake fan and a ventilation shaft must be designed in such a way that it minimizes the energy waste due to singularity losses. As a result, the questions of which radius of curvature to use and if guide vanes have to be included need to be answered. In that case, the variables such as the number, upstream and downstream penetration length, radius of curvature, and width of the vanes, need to be defined. Although this work is oriented to mine ventilation, these questions are usually valid in other engineering applications as well. The objective of this study is to define the previously mentioned variables to determine the optimal design combination for the radius/diameter relationship (r/D). Computational fluid dynamics was used to determine the shock loss factor of seven elbow curvature ratios for a 3 m diameter duct and fan, with and without guide vanes to estimate the best performing configuration and, therefore, to maximize the fan airflow volume. The methodology used consisted of initially developing models in 2D geometries, to optimize the meshing and the CPU use, and studying separately the number of vanes, upstream and downstream penetration, radius of curvature, and width of the vanes for each curvature ratio (r/D). Then, the best-performing variable combinations for each curvature ratio were selected to be simulated and studied with the 3D geometries. The application of the guide vane designs for three-dimensional simulated geometries is presented, first without and then with guide vanes, including the shock loss factors obtained. The methodology and obtained results allowed quantifying the energy savings and to reduce the CFD simulations steps required to optimize the design of the elbow and guide vanes. The results obtained cannot be used with elbows in exhaust fans, because fluid dynamics phenomena are different.
The evolution toward sustainable mining can be achieved by implementing circular economies (CEs), and one way forward is via product-service systems (PSSs). However, applying PSSs in the mining industry is an area with little extant research. We seek to contribute to CE and sustainability research by proposing a model by which mining companies can achieve circularity through their suppliers: something which has not yet been explored. First, we present a critical literature review of published papers about the barriers and benefits in industries where servitization or PSS has been applied. We discuss barriers impeding PSS implementation in the mining industry, along with related concepts including CE and PSSs in digital technologies. With this study we hope to draw more discussion to the topic of PSSs in the mining industry and provide useful guidelines to academics and industry professionals for PSS implementation in mining: an important step toward circularity.
1 February 2014 in Tunnelling and Underground Space Technology
Tunnels, drifts, drives, and other types of underground excavation are very common in mining as well as in the construction of roads, railways, dams, and other civil engineering projects. Planning is essential to the success of tunnel excavation, and construction time is one of the most important factors to be taken into account. This paper proposes a simulation algorithm based on a stochastic numerical method, the Markov chain Monte Carlo method, that can provide the best estimate of the opening excavation times for the classic method of drilling and blasting. Taking account of technical considerations that affect the tunnel excavation cycle, the simulation is developed through a computational algorithm. Using the Markov chain Monte Carlo method, the unit operations involved in the underground excavation cycle are identified and assigned probability distributions that, with random number input, make it possible to simulate the total excavation time. The results obtained with this method are compared with a real case of tunneling excavation. By incorporating variability in the planning, it is possible to determine with greater certainty the ranges over which the execution times of the unit operations fluctuate. In addition, the financial risks associated with planning errors can be reduced and the exploitation of resources maximized.
18 March 2022 in International Journal of Rock Mechanics and Mining Sciences
ResumenEn la fundición de sulfuros de cobre los gases provenientes del horno convertidor tipo Teniente son altamente corrosivos y tóxicos, por lo que deben ser tratados para evitar que impacten el medio ambiente.En el presente estudio se propone una metodología novedosa para la simulación del sistema de captación y enfriamiento de los gases de fundición mediante el uso de mecánica computacional de fluidos (CFD), aplicado a los gases provenientes de un convertidor de cobre tipo Teniente, donde se propone una serie de suposiciones que permite adaptar los modelos físicos para su simulación mediante CFD, además de realizar una validación de los resultados mediante instrumentos a escala industrial reales.Mediante la metodología propuesta es posible obtener un modelo de simulación del comportamiento de los gases de fundición con un error relativo aceptable. Esto en términos prácticos indica que las tendencias que siguen los gases metalúrgicos a lo largo de su recorrido por la campana y cámara de enfriamiento en la simulación pueden ser confiables para obtener una buena aproximación del comportamiento térmico de los gases al interior de la red de manejo de gases estudiada.AbstractIn the copper sulfides smelting process, the Teniente-type converter generates highly corrosive and toxic gases, which is why treating them is crucial in order to avoid environmental damage.The present study proposes a new methodology to simulate the capture and cooling system of smelting gases through the application of Computational Fluid Dynamics (CFD) to the gases that emanate from a Teniente-type converter, where a series of assumptions that allow the adaptation of the physical model for the CFD simulation are proposed along with the validation of the results using real industrial-scale instruments.By applying this method, it is possible to obtain a behavioral simulation model of the smelting gases with an acceptable relative error. In practical terms, this means that the tendencies that metallurgical gases show in the simulation flowing through the bell and the cooling chamber can be trusted to predict the thermal behavior of the gases contained in the gas management network