The noise passengers experience in aircraft cabins originates from different sources. One of them is structure-borne noise originating from jet engines. In the case of wing-mounted engines, minor imbalances of rotating engine components can result in a vibration of the wing structure. The wing vibrations are transmitted to the fuselage, potentially giving rise to substantial structure-borne noise. While there are state-of-the-art methods for calculating the acoustic emissions of jet engines during relevant flight conditions, i.e., take-off, cruise and landing, this is not the case for operational vibrations of jet engines. This publication focuses on the development of an engine vibration model on the basis of limited data in the early design phase. The result of the vibration model is a vibration load profile that can be used to excite numerical aircraft models. In combination with the respective jet and fan noise excitation profiles acting on the fuselage, this model will enable future studies to perform holistic assessments of the noise acting inside the cabin. The developed model combines a theoretical approach for the estimation of unbalance forces with measurement data from in-flight experiments with a research aircraft. An exemplary vibration load set for a V2500 engine is calculated and applied to a full aircraft model to show the fuselage response.
In the framework of CleanSky2’s Airframe project DA9, engine tonal noise is a cooperation between Dassault Aviation and DLR. The project aims to enhance the understanding and mitigation of engine-related tonal noise in the aircraft cabin. The presented work was done to get an in-depth understanding of the vibroacoustic behavior of DLR’s Falcon 2000LX ISTAR aircraft. A two and a half weeks long vibroacoustic ground test was conducted utilizing artificial shaker excitation and operational engine excitation. The responses were measured using a roving grid of accelerometers at more than 1200 positions, meaning a subset of about 250 sensors were installed at every given time and then moved along the fuselage in a predetermined way to get a high-resolution measurement of aircrafts fuselage. The accelerometer data were than processed to show operational deflections shapes and calculate experimental structural intensity vector fields to analyze the energy transfer through the structure for optimized placement of active or passive counter measures. Specifically, the transport of tonal frequencies generated by the engines was analyzed.
11 February 2026 in Mechanical Systems and Signal Processing
Vector fields of structural intensity contain information about transfer paths for vibrational power flow. Because these fields can be challenging to interpret, researchers have proposed various approaches to simplify the analysis and identify transfer paths, including vectorfield decomposition and streamline visualization. However, a standard method for identifying vibrational powerflow paths has not yet been established. Pattern recognition by the human eye, supported by such visualization techniques, allows path identification to some extent, but the results are not always reliable, reproducible, or robust. In this paper, a dedicated method for path identification in structural intensity vector fields is developed. To this end, the vectorfield component obtained from a Hodge–Helmholtz decomposition that exhibits strong frequency dependence, namely the divergencefree component, has been identified as the key contributor. This component has received little attention in previous publications. Using a validated finite element model, the reader is guided stepbystep to the central finding: calculating the absolute gradient field of the scalar potential associated with the divergencefree component provides a promising and deterministic approach for identifying powerflow paths. The results are discussed and linked to a fundamental physical interpretation based on the presence of curl networks in structural intensity fields. Furthermore, the developed path identification approach is applied to structural response measurement dataset of a full-scale fuselage structure to showcase the applicability to relevant large-scale structures prone to vibrations.