Multi-aspect Synthetic Aperture Radar (SAR) observations of complex targets often exhibits distinct anisotropic feature, which also contains rich information about target structural complexity. In practical scenarios, SAR images at certain aspects may be unsampled or not be available, in such case, interpolation of SAR images from other sampled or available aspects, known as multi-aspect interpolation, is needed. This paper conducts a preliminary study on the quantitative description of anisotropic scattering variation (ASV) and the relationship between ASV and multi-aspect interpolation based on typical aircraft target airborne multi-aspect SAR dataset. The aim is to clarify when it is more meaningful to perform multi-aspect interpolation and propose ASV operator to describe the variation of anisotropic scattering, which, to some extent, can also express target structural complexity. In the exploration process, it was found that certain expression of anisotropic feature can reflect the structural and textural feature of targets, which can represent changes of anisotropic scattering. Therefore, these expressions are incorporated into ASV operator, which makes the operator effective. Experimental results show that the proposed ASV operator can accurately describe changes of anisotropic scattering based on aircraft target data. Moreover, it can predict the effectiveness of interpolated SAR images based on the value of ASV operator. Consequently, multi-aspect interpolation of SAR images at required aspects can be performed based on prior predictions using sampled SAR images.

Radio frequency interference (RFI) is an important factor affecting microwave remote sensing observations, causing random degradation of synthetic aperture radar (SAR) images. Due to the huge amount of raw echo and single-look complex (SLC) data, there are some SAR interpretation scenarios when only amplitude images can be obtained, and traditional signal transformation and matrix operations can hardly meet the suppression requirements in the absence of phase information at this time. Although deep learning algorithms have made some progresses on this issue, they still suffer from the following limitations: (i) There are few models dedicated to SAR RFI in the image domain; (ii) The network structure is relatively complex due to not fully exploit the physical characteristics of SAR and RFI. To this end, we propose an end-to-end suppression network (PMNet), which includes a novel explainable feature decomposition module (FDM) based on the idea of non-negative matrix factorization and a composite loss function to achieve dynamic separation of foreground and background features of supervised RFI-contaminated images. The ablation experiment proves that compared with the baseline algorithm, the visual similarity of the proposed PMNet on the test set can be improved by up to 14.15%. The suppression result on Sentinel-1 and Gaofen-3 real data also verifies the effectiveness of the PMNet in different SAR platforms.

Radio Frequency Interference (RFI) significantly degrades the quality of spaceborne Synthetic Aperture Radar (SAR) images, and RFI source localization is a crucial component of SAR interference mitigation. Single-station, single-channel SAR, referred to as single-channel SAR, is the most common operational mode of spaceborne SAR. However, studies on RFI source localization for this system are limited, and the localization accuracy remains low. This paper presents a method for locating the ground-based RFI source using spaceborne single-channel SAR echo data. First, matched filtering is employed to estimate the range and azimuth times of the RFI pulse-by-pulse in the SAR echo domain. A non-convex localization model using Pulse Range Difference of Arrival (PRDOA) is established based on the SAR observation geometry. Then, by applying Weighted Least Squares and Semidefinite Relaxation, the localization model is transformed into a convex optimization problem, allowing for the solution of its global optimal solution to achieve RFI source localization. Furthermore, the error analysis on the PRDOA localization model is conducted and the Cramér–Rao Lower Bound is derived. Based on the simulation platform and the SAR level-0 raw data of Gaofen-3, we conduct several verification experiments, with the Pulse Time of Arrival localization selected for comparison. The results demonstrate that the proposed method achieves localization accuracy with a hundred-meter error in azimuth and a kilometer-level total error, with the total localization errors reduced to approximately 1/4 to 1/3 of those of the Pulse Time of Arrival method.

Due to the huge differences in Synthetic Aperture Radar (SAR) image features of the same target under different observing aspects, the demand for constructing multi-aspect SAR datasets of various typical targets is becoming increasingly urgent with the expansion of SAR technology application fields. Meanwhile, multi-aspect interpolation techniques for constructing multi-aspect SAR datasets, based on electromagnetic scattering features and on Generative Adversarial Networks (GANs), have some shortcomings that are difficult to address. The former method provide descriptions of the target scattering so overly idealized that they are not real, while the latter method suffers from incomplete amplitude information and a loss of phase information in multi-aspect interpolation results due to the SAR images input into GANs being phaseless and amplitude-quantized. In response to the above issues, this paper proposes the Multi-aspect Scattering Information Complex GAN (MS-CGAN) guided by the scattering information in observing aspects of SAR images to simulate the multi-aspect interpolation of SAR images from specific aspects. MS-CGAN provides a new approach for dataset construction and augmentation. Moreover, as a complex network, MS-CGAN does not require phase removal or amplitude quantization of the input SAR images; thus, the significant issue of the severe loss of scattering information in multi-aspect interpolation methods based on GANs is greatly addressed. In the experiments, assuming the absence of real SAR images from certain aspects, both the correlation coefficient and the phase correlation between interpolated SAR images from MS-CGAN and real SAR images achieve good results. In the case of a sampling aspect interval of 10°, the mean correlation of the amplitude and phase of the interpolated SAR images and the corresponding real SAR images both reach over 80%. In the case of a sampling aspect interval of 20°, the mean correlation of the amplitude and phase of the interpolated SAR images and the corresponding real SAR images remain above 75%. In the case of a sampling aspect interval of 30°, the mean correlation of the amplitude and phase of the interpolated SAR images and the corresponding real SAR images can reach around 70%. Energy integration curves are completed at specific aspects, demonstrating the effectiveness of the MS-CGAN multi-aspect interpolation method.

Radio-frequency interference (RFI) severely degrades the imaging quality of synthetic aperture radar (SAR), especially when the interference energy is strongly coupled with ground backscatter in both the time and frequency domains. Existing algorithms typically rely on energy contrast or component decomposition in transform domains, which limits their ability to cleanly separate complex RFI from high-power echoes. Exploiting the fact that kurtosis is insensitive to ground clutter and background noise, this paper proposes an interference suppression network based on the temporal kurtosis guidance mechanism. Specifically, a statistical prior vector capturing the non-Gaussian characteristics of RFI is constructed using kurtosis in the time–frequency domain and is integrated into a multi-scale attention mechanism, allowing the network to more effectively concentrate on interfered regions. Meanwhile, a systematic framework is established for the quantitative assessment of phase fidelity in the reconstruction of complex-valued SAR echoes. On this basis, by exploiting the strong generalization capability and high processing efficiency of data-driven models, the proposed network achieves improved RFI separation and enhanced reconstruction accuracy of underlying scene features. Ablation experiments validated that the design of a kurtosis-guided module can reduce the mean square error (MSE) loss by 14.87% compared to the basic model. Furthermore, regarding the phase fidelity, the correlation coefficient between the suppressed signal and the original true signal reached 0.99. Finally, GF-3 satellite data are used to further demonstrate the effectiveness and practicality of the proposed method.