This article discusses challenges in designing optically transparent antennas and filters for smart city applications. The smart city concept seeks to alleviate urban challenges that include infrastructure and network capacity. The proposed frequencies for the next generation of wireless networks (5G) would result in shorter broadcast distances and network dead zones. Additional access points and signal repeaters embedded into the existing infrastructure, by inserting transparent antennas into windows via either meshed conductors or transparent conductive oxides (TCOs), would help to mitigate these issues. Glass-embedded frequency-selective surfaces (FSSs) can be used anywhere that requires microwave filtering and optical transparency. The cyberphysical system security in this forthcoming network also poses challenges to entities that require strict network security. This article focuses mainly on TCOs, particularly doped zinc oxide (ZnO), as promising material for transparent antennas and filters. To demonstrate the potential of ZnOs as highly transparent conductive materials for antenna and filter applications, we designed, fabricated, and tested a gallium-doped ZnO- (GZO) based optically transparent 2.4-GHz Wi-Fi antenna and two FSSs (bandpass and bandstop filters) operating in the 23-29-GHz frequency range. These results confirm the potential for ZnO-based TCOs as suitable alternatives to indium tin oxide (ITO) for microwave applications.
16 July 2020 in IEEE Transactions on Antennas and Propagation
This article's objective is to discuss the anatomical and technical challenges associated with designing subcutaneously implanted antennas for continuous wireless medical telemetry. One challenge in this design process is the connection between simulation setup and the anatomical layering of tissues in biological systems. This article presents an overview of the layers of tissues associated with subcutaneous implant (epidermis, dermis, and hypodermis) as well as the measured dielectric properties of these tissues. In addition, this study presents the design and measurement of an implantable dual-band antenna operating on the wireless medical telemetry service (WMTS) (1.395-1.432 GHz) and industrial, scientific, and medical (ISM) (2.4-2.5 GHz) communication bands. This antenna was validated ex vivo and in vivo using porcine animal models. The antenna has a simulated bandwidth of 2.3% for WMTS and 5.7% for ISM bands. In addition, the antenna saw a 300 MHz shift, ex vivo, to the right for WMTS while not having a shift for the ISM band. For in vivo validation, two antennas were made and tested in a porcine animal model and both show an adequate transmission range of 10 m.
29 April 2022 in IEEE Open Journal of Antennas and Propagation
In this article, we report the first ever antenna array with >90% transparency that is intended for 5G networks for smart cities. This level of transparency is achieved by using Gallium-doped Zinc Oxides. The array designed and tested is for sub-6GHz 5G and operates at 5.8GHz. This seamless design allows such arrays to be integrated into windows of buildings within the smart city to provide consistent network coverage. The phased array has good gain and scanning characteristics as presented below. We have also included a discussion regarding gain and beam steering capabilities in comparison to similar arrays made of conventional copper and RF substrates. This study presents the comparison of two antenna arrays, one constructed from copper antenna elements (Simulated operational band from 5.67 GHz to 6.62 GHz, 7.6% bandwidth, and gain of 2.18 dBi) and one constructed from GZO antenna elements (Simulated operational band from 2.8 GHz to 10 GHz, 112.5% bandwidth, approximately 8% efficiency, and a gain of -10.87 dBi). Both element designs have a 1.5cm by 1.5cm footprint. The results show that a 4x1 array of GZO elements will increase the gain to 0.34 dBi from a gain of -10.87 dBi of a thin film, GZO antenna element. In addition, over 90% transparency allows window integration without obstructing the view. The techniques described in this article also can be used to integrate such arrays in glasses and other transparent materials for various IoT applications.
People with chronic illnesses rely on continuous monitoring systems to monitor their vital signs. Despite the advantages of these systems, patients experience discomfort from bulky wearable devices and the inconveniences associated with fully implantable continuous monitoring systems. A potential solution to these limitations is a wearable E-textile antenna. In this study, we conduct market research and introduce an antenna design made of conductive fabric on cotton substrate. Market research is performed to evaluate multiple conductive fabrics to select the best material for this application. The antenna design operates in the 2.4 GHz and 5.8 GHz ISM frequency band and is evaluated by simulation and in vitro testing with tissue-mimicking gels at various bend angles ranging between 0 and 45 degrees.
People suffering from chronic diseases like diabetes, heart disease, and Parkinson’s disease are reliant on their implantable devices to improve their quality of life and to manage their chronic conditions. Despite their advantages, some systems are battery-powered, which can lead to battery failure, resulting in prophylactic surgery. One solution to this issue is an implantable antenna that provides an adequate link margin across various skin sites. In this study, we introduce an implantable antenna design optimized using an open-source PSO algorithm. The antenna is a tunable WMTS-motivated design fabricated on a Rogers 6010.2 substrate and evaluated by simulation and in vitro testing using phantom tissues. Validation measurements are performed to evaluate the effects of implantation depth across various adipose thicknesses.