Growing demand in the wearable device industry for noninvasive, user-connected, and real-time activity trackers and body monitors is increasing the need for low-profile wearable antennas on fabric substrates, particularly for health and safety applications. Current data regarding environmental and human factors in this field that affect the real-world use of the devised antennas are incomplete. This article presents data regarding the impact of garment position, especially the distance between the skin and fabric substrate, on antenna performance. A distance of the substrate from the skin in the less than a 5-mm range was found to have a significant influence on antenna performance. The effects of humidity and dampness on the permittivity of five types of fabrics commonly used in commercial and health care-related garments are also investigated. The performance of a textile-based RFID printed directly on a nonconductive interface layer situated on single jersey knit cotton fabric was studied, and sheet resistance results of inkjet printing with two conductive nanoparticle inks from NovaCentrix are presented.
10 April 2023 in IEEE Open Journal of Antennas and Propagation
We report the fabrication methodology of stereolithography (SLA) printed molds for metal and resin cast antennas. In the first method, a conical horn created using metal cast molds printed from a glass-filled resin utilizes a casting technique allowing for low-cost 3D printing to fabricate metal antennas, reducing the losses incurred by metallized plastics, while still producing complex geometries quickly. This metal cast conical horn is compared to a horn constructed using a more traditional 3D printing method. The second casting method demonstrates the interchangeability between creating parts via SLA printing with a glass-filled resin and using the same resin cast into a reusable Polydimethylsiloxane (PDMS) mold. We demonstrate this method by casting an interchangeable slug for a capacitively coupled, mechanically reconfigurable disk loaded monopole. Simulated and experimental data are presented for S11, and Gain. Simulated BW, directivity, gain and efficiency as a function of frequency are presented. The results indicate that the 3D printed metal casting process produces antennas with a higher gain and lower return loss than metallized resin antennas. The method is suitable for difficult geometries requiring resolution of at least 50 lm. The capacitively coupled disk loaded monopole demonstrates the versatility of 3D printing in antenna fabrication.
16 April 2024 in Journal of Agriculture, Food Systems, and Community Development
Food insecurity among college students is an emerging public health issue, affecting a considerable proportion of the student population nationwide, approximately 35–45%. Research is discovering links between college student food insecurity and physical and mental health, as well as academic performance. Such high prevalence of student food insecurity highlights the urgency of addressing the lack of consistent access to nutritious food. This research examines a pilot intervention at an urban public university that deployed miniature food pantries across campus from which anyone could take food anonymously. The research team systematically restocked these pantries with food on a weekly basis for nearly two school years. Sensors installed in the pantries collected instances when individuals “interacted” with the pantry’s door. The sensor system documented thousands of interactions with the pantries each school year. As such, the intervention can be considered a success. However, the miniature pantry model was not without flaws: its decentralized nature created challenges for the research team, the sensor system was often unstable, and heavy reliance on undergraduate students proved a long-term problem. The research team believes that administrative and information technology improvements could further enhance the model’s ability to mitigate campus food insecurity. This intervention could be an inspiration to other campuses and other institutions considering similar strategies.
2 July 2025 in IEEE Antennas and Propagation Magazine
As antenna design research progresses into more advanced techniques, recurrent manual editing of CAD models is one of the last, laborious obstacles for fully automated optimization. In this article we present AntennaCAT (Antenna Calculation and Autotuning Tool), which is designed to lower the barrier to entry for advanced antenna design and optimization while increasing the repeatability of the experimental process. AntennaCAT is open source software that automates the design, simulation, and optimization processes. It is compatible with multiple electromagnetic (EM) simulation software suites, including HFSS, CST, and FEKO, and includes integrated optimizers popular for multiparameter antenna design problems. Discussed are major software features for design, data collection and interpretation for machine learning (ML), internal simulation-integrated optimizers and their ML assisted hyperparameter tuning, and significance for replication studies.